AC rotary panel 120V/30A OFF+2

The Blue Sea Systems 8367 AC rotary switch is designed to safely and efficiently manage AC power sources aboard vessels. It allows switching between two 120 V alternating current sources and an 'OFF' position, powering a single circuit.

This panel is designed to operate at a nominal voltage of 120 V AC and supports a maximum current of 30 A.

The panel can switch between two separate AC power sources, in addition to an « OFF » position to disconnect all sources.

Overall dimensions of the panel are as follows:

Height: 95.25 mm (3.75 inches)Width: 133.35 mm (5.25 inches)Depth: 48.51 mm (1.91 inches)

The panel is made from a 5052 aluminum alloy with a thickness of 3.175 mm (1/8"). It features a two-part slate gray polyurethane finish and an anti-corrosion primer for enhanced durability in marine environments.

The panel integrates a rotary switch of model 9011. It is an industrial-grade robust switch, offering 2 poles and 3 positions (OFF + 2 sources).

Yes, the panel includes visual safety indicators. Red LEDs indicate the activation of the selected AC source and may also signal reversed polarity.

The panel weighs 0.29 kg (0.65 lbs).

Yes, the panel is specifically designed for use aboard vessels. Its construction in 5052 aluminum alloy with a polyurethane finish and an anticorrosion undercoat ensures resistance to marine environments.

The "OFF" position completely disconnects the circuit from any AC power source, ensuring maximum safety during maintenance or when power is not required.

The required cutout dimensions for installing the panel are 84.07 mm (3.31 inches) in height and 111.13 mm (4.38 inches) in width.

The panel is designed to be recessed. Once the cutout is made, it is typically secured to the dashboard or bulkhead surface using screws, ensuring a flush and secure installation.

To connect this panel, an AC (alternating current) wiring capable of handling 120 V and a maximum current of 30 A is required. It is essential to use appropriately sized cables and comply with current marine electrical standards.

Yes, Blue Sea Systems generally provides detailed wiring diagrams with its products to facilitate correct and safe installation. It is recommended to consult the documentation provided by the manufacturer.

No, this panel is specifically designed for 120 V AC systems. It must not be used with voltages higher than 120 V AC.

No, the panel is designed for a maximum current of 30 A. Using the panel with a current exceeding this limit may damage the device and pose a safety risk.

No, the AC Blue Sea Systems 8367 rotary switch is designed exclusively for 120 V alternating current (AC) applications. It is not compatible with direct current (DC) systems.

No, the panel is designed to switch between two AC power sources to supply a single circuit. To manage multiple circuits, more complex distribution panels or additional devices would be required.

Yes, like most Blue Sea Systems products, the AC 8367 rotary switch panel is covered by the manufacturer's warranty. For specific warranty details, it is recommended to consult the terms and conditions provided by Blue Sea Systems.

The panel features a two-part slate-grey polyurethane finish applied over the aluminum alloy, providing a durable and corrosion-resistant appearance.

The Blue Sea Systems 8367 AC rotary switch is designed to safely and efficiently manage two 120 V AC power sources. It allows switching between these two sources and an 'OFF' position to power a single circuit aboard a vessel.

This panel is designed to operate at a nominal voltage of 120 V AC and can handle a maximum current of 30 A.

The panel integrates a robust industrial-type rotary switch, model 9011. It is configured with 2 poles and 3 positions (OFF + 2 sources).

The specific dimensions of the panel are:

Height: 95.25 mm (3.75 inches)Width: 133.35 mm (5.25 inches)Depth: 48.51 mm (1.91 inches)

The AC Blue Sea Systems 8367 rotary switch weighs 0.29 kg (0.65 lbs).

The panel is constructed from a 5052 aluminum alloy with a thickness of 3.175 mm (1/8"). It features a two-part slate-gray polyurethane finish and an anti-corrosion primer for enhanced durability in marine environments.

Yes, the AC 8367 rotating panel includes visual safety indicators in the form of red LEDs.

The two poles of the rotary switch allow simultaneous switching of both AC conductors (live and neutral or both live conductors in certain systems) between different power sources, thereby ensuring complete and secure isolation of the selected circuit.

Yes, this panel is specifically designed for use aboard vessels. Its construction in 5052 aluminum alloy with a slate-gray polyurethane finish and an anti-corrosion undercoat makes it resistant to the marine environment.

The Blue Sea Systems 8367 AC rotary switch panel is a complete panel with an integrated rotary switch, ready for installation.

No, this panel is specifically designed for 120 V AC systems. It must not be used with voltages exceeding 120 V AC.

No, the AC 8367 rotating panel is designed to handle a maximum of two AC power sources, in addition to an "OFF" position.

No, the AC 8367 rotary switch is designed to power a single circuit by switching between the two available power sources.

Yes, this panel is suitable for switching between different 120 V AC power sources, such as shore power, a vessel inverter/charger, or a generator, to power the boat's main circuit.

For installing this panel, it is recommended to use electrical cables of appropriate gauge for 30 A and 120 V AC, compliant with current marine standards (e.g., tinned multistrand cables).

Although the panel is designed for the marine environment, it is recommended to install it in a location protected from direct water spray and excessive humidity to ensure its longevity and electrical safety.

The AC 8367 rotary switch is a source selector and does not include overcurrent protection devices. Appropriate circuit breakers or fuses must be installed upstream of each power source and downstream of the panel to protect circuits and equipment.

The anticorrosion primer, applied beneath the slate-grey polyurethane finish, provides additional protection to the 5052 aluminium alloy panel against the corrosive effects of a saline marine environment, thereby extending the product’s lifespan.

The Blue Sea Systems 8367 AC rotary switch is supplied as a complete unit with its built-in switch. The external wiring required to connect it to power sources and the charging circuit is not included and must be purchased separately.