Push button latching ON/OFF 3.3V Blue LED

This CZone push button provides latching ON/OFF operation. This means it retains its position (ON or OFF) once pressed, until pressed again to change state.

The CZone push button is fitted with a blue LED to clearly indicate the circuit status.

This push button is designed to operate at a 3.3V DC voltage, specifically for CZone systems.

The CZone push button can handle a maximum current of 5 amperes.

This push button is manufactured with stainless steel components, ensuring durability and resistance in demanding marine environments.

The CZone push button has an IP67 environmental rating. This means it is fully protected against dust and can withstand temporary immersion in water, making it suitable for outdoor applications and damp areas aboard.

The blue LED provides a clear visual indication of the state of the circuit controlled by the button, allowing you to see at a glance whether the circuit is activated or deactivated.

Yes, thanks to its IP67 environmental protection and stainless steel components, this push button is perfectly suited for outdoor applications and wet areas aboard vessels.

The reference number (SKU) for this CZone push button is 80-911-0061-00.

This push button is a CZone product, a brand specializing in digital switching systems for marine applications.

The main function of this button is to provide a latching ON/OFF control for circuits integrated into CZone digital switching systems, with a visual indication of status via a blue LED.

A latching button, like this one, maintains its state (ON or OFF) after being pressed, until pressed again. A momentary button only maintains its state while it is held down, and returns to its initial position once released.

No, this push button is specifically designed for exclusive use with CZone digital switching systems. It is not compatible with other non-CZone marine electrical systems.

Yes, this push button is designed to integrate with CZone systems and is compatible with relevant CZone modules, such as the Switch Control Interface (SCI) and Digital Switch Bus (DSB), when used with an appropriate adapter cable.

Yes, using this push button requires a CZone system. It is designed to operate only within this digital switching ecosystem.

The button itself operates at 3.3V DC and is designed to integrate into a CZone system. Compatibility with 12V or 24V systems will depend on your CZone system’s architecture and its modules, which handle power conversion and distribution.

Installing this push button requires a standard 19 mm mounting hole.

No, the push button is sold separately. Push button cable assemblies are sold separately and are required to connect it to your CZone system.

For physical installation, you will primarily need a tool to drill a 19 mm hole in your panel, such as a hole saw or appropriate drill bit, as well as basic tools for tightening if necessary.

To connect this push button to your CZone system, you will need to use a CZone-compatible cable assembly, specifically designed for push buttons (e.g., part numbers 80-911-0085-01, 80-911-0086-01, etc., sold separately), which will connect to a CZone Switch Control Interface (SCI) or Digital Switch Bus (DSB).