Marine FM speakers Marine flush-mount black square 6.5", 120 W

These Fusion FM marine speakers have a peak power of 120 W. Their RMS power (Root Mean Square) is 30 W per channel, indicating the continuous power they can handle efficiently.

To install these 6.5-inch square flush-mount speakers, you will need to cut a 138 x 138 mm (5 7/16 x 5 7/16 in) opening in your mounting surface. It is recommended to use the template provided with the product to ensure a precise cut.

Yes, these speakers are IP65 certified per IEC 60529. This means they are fully protected against dust ingress and water jets from any direction. This protection applies to the front of the speaker.

The minimum mounting depth required for these speakers is 70 mm (2 3/4 inches). It is essential to ensure that the chosen location provides sufficient clearance behind the mounting surface to accommodate the speaker.

The nominal impedance of these marine speakers is 4 Ohms. It is important to check the compatibility of this impedance with your amplifier or marine car stereo to ensure optimal operation and avoid damaging your audio equipment.

These speakers feature an aluminum dome tweeter for high frequencies. The cone is made of polypropylene and the surround is rubber, materials chosen for their durability and performance in a marine environment.

To clean your speakers, use a damp cloth soaked in fresh water to remove salt and residue. For heavy salt buildup or stains, a mild detergent can be used. It is important not to use harsh or solvent-based cleaners, as they could damage the product. Also avoid high-pressure water jets when cleaning your boat.

These speakers are designed to operate within a temperature range of 0 to 50°C (32 to 122°F). They can be stored at temperatures ranging from -20 to 70°C (-4 to 158°F).

It is recommended to use an amplifier with an RMS power output between 15 and 80 W per channel to power these speakers. This will ensure optimal audio performance and extend the lifespan of your speakers.

The minimum panel thickness for mounting must be 3 mm (1/8 inch), and the maximum thickness must not exceed 25 mm (1 inch). It is critical to comply with these specifications to ensure safe and stable speaker mounting.

To avoid any interference with a magnetic compass, it is recommended not to mount speakers at a distance less than:

245 cm (96.5 in) from the rear of the speaker
235 cm (92.5 in) from the front of the speaker
195 cm (76.8 in) from the sides of the speaker

Yes, these speakers are True-Marine™ products. This means they have undergone rigorous environmental testing in harsh marine conditions to exceed industry guidelines for marine products. True-Marine products are designed for ease of use and incorporate advanced marine technologies.

After positioning the speaker in the cutout, tighten the mounting screws by hand with a torque screwdriver to 1.0 Nm (0.74 lbf-ft). Do not use power tools for the final tightening to avoid damaging the speaker housing.

The recommended optimal enclosure volume for these speakers is 4 litres. An appropriate enclosure volume helps improve acoustic performance and sound quality.

Tools generally required for installation include:

A Phillips screwdriverA torque screwdriver with Phillips bitA saw or utility knife suitable for cutting surface materialWire strippers (optional)A crimping tool (optional)Electrical tape (optional)Marine sealant (such as 3M™ 4200 or 5200)4.8 mm and 6.3 mm female spade connectors (recommended)

Yes, if you mount the speakers in an area exposed to weather or water, they must be mounted on a vertical surface. Mounting them on a horizontal surface facing upward can lead to water accumulation and damage. If mounted outside the boat, they must be well above the waterline to avoid submersion or damage from docks or other equipment. The IP65 rating protects the front of the speaker; exposure to water and damage to the rear voids the warranty.

These marine speakers provide a frequency response from 100 Hz to 18 kHz. This range ensures clear reproduction of midrange and treble frequencies, essential for balanced audio in a marine environment.

Yes, all True-Marine products, including these speakers, are covered by the Fusion worldwide limited warranty. This certification confirms their design to withstand harsh marine conditions.