Fusion XS Classic 6.5" marine speakers (pair), 200 W

These Fusion XS Classic 6.5" marine speakers have a peak power of 200 W and an RMS (Root Mean Square) power of 50 W per speaker.

These Fusion XS Classic Edition 6.5" marine speakers are sold in pairs.

These speakers are rated IP65 for water and dust resistance. Note that the front of the speaker is protected against water ingress, but the rear of the speaker, including all components and connected wires, is not waterproof and must be kept away from moisture.

The frequency response of these marine speakers is 80 Hz to 18 kHz.

The cone of these speakers is made of polypropylene, and the tweeter is an aluminum dome.

No, the Classic edition of these Fusion XS 6.5" marine speakers is not equipped with LED lighting.

The nominal impedance of these speakers is 4 ohms.

The efficiency of these speakers is 91 dB (measured at 1W/1M).

The box contains the following items:

2 speakers12 stainless steel cross-head mounting screws (4.2 mm x 25.4 mm)1 mounting templateSpeaker grilles

For installation, you will need the following tools:

An electric drillA bit (size depending on the surface material)A suitable saw or utility knife to cut the surface materialA Phillips screwdriverWire strippersTinned marine-grade 16 AWG (1.3 to 1.5 mm²) copper speaker wire (not included)6.3 mm and 4.8 mm female spade connectors (recommended, not included)A crimping toolMarine sealant (optional)

Use 16 AWG (1.3 to 1.5 mm²) tinned marine-grade speaker wire to connect speakers to your audio system. This wire is not included with the speakers.

You can identify speaker wire polarity as follows:

The white wire is positive (+) and connects to a 6.3 mm spade connector. The white wire with a black stripe is negative (-) and connects to a 4.8 mm spade connector.

When mounting speakers in an area exposed to weather or water, mount them on a vertical surface. It is crucial to select a mounting location that protects the rear of the speaker from moisture, as this part is not waterproof.

Yes, it is strongly recommended to use the mounting template provided in the product box to ensure precise cutting and avoid damaging the mounting surface of your boat.

For these speakers, a recommended RMS amplifier power is 20 to 150 W per channel.

These speakers, being True-Marine™ products, are covered by Fusion’s 3-year limited global consumer warranty.

The True-Marine™ certification means these products have undergone rigorous environmental testing in harsh marine conditions, exceeding industry standards for marine products. They are designed for ease of use and incorporate advanced marine technologies to deliver cutting-edge entertainment experiences.