Fusion XS Classic 7.7" Marine Speakers 240 W (pair)

These Fusion XS Classic 7.7" marine speakers deliver 240 W peak power and 60 W RMS (Root Mean Square) power. This ensures clear and powerful sound on the water.

This pack includes a pair of marine speakers with a 7.7" (approx. 19.6 cm) diameter. The total external diameter is 176 mm (6 5/8").

These Fusion XS Classic 7.7" marine speakers are sold as a pair. The package contains two complete speakers.

The True-Marine™ label indicates that these speakers have undergone rigorous environmental testing in harsh marine conditions. They exceed industry guidelines for marine products, ensuring durability, ease of use, and a premium entertainment experience at sea.

These Fusion XS Classic 7.7" marine speakers have an impedance of 4 Ohms. Ensure your amplifier or source unit is compatible with this impedance for optimal operation.

The required mounting depth for these speakers is 77 mm (3.03 inches). It is essential to verify that you have sufficient space behind the mounting surface before cutting.

To install these speakers, a cut-out diameter of 162 mm (6 3/8 inches) is required. A mounting template is included in the box to help you make an accurate cut.

Yes, a mounting template is included in the box. It is strongly recommended to use this provided template rather than printing your own to ensure precise cut-out dimensions.

For a successful installation, recommended tools include:

An electric drill and a bit suitable for the surface materialA suitable saw or utility knife for cuttingA Phillips screwdriverWire strippersMarine-grade 16 AWG (1.3 to 1.5 mm²) speaker wireFemale fork connectors in 6.3 mm and 4.8 mm sizes (recommended)A crimping toolMarine sealant (optional)

Yes, 12 Phillips mounting screws made of stainless steel (4.2 mm x 25.4 mm, or #8 x 1 inch) are included in the box for securing the speakers to the mounting surface.

The front of these speakers is protected against water infiltration. However, the rear of the speaker, including all components and connected wires, is not waterproof and must be protected from moisture. It is crucial to choose a mounting location that shields the rear of the speaker from any exposure to moisture to prevent damage and preserve the warranty.

It is strongly recommended to have your audio system installed by a professional installer. This ensures optimal performance and helps avoid potential personal injury or material damage.

All Fusion products bearing the True-Marine™ label are covered by Fusion’s 3-year limited global consumer warranty.

It is recommended to choose a flat and vertical mounting surface to ensure the best possible waterproofing. If you mount the speaker on an upward-facing horizontal surface, water can accumulate and cause damage over time.

If you plan to mount the speakers outside the boat, they must be installed in a location well above the waterline. They must not be submerged or damaged by docks, pilings, or other equipment. Exposure to water and damage to the rear of the speaker void the warranty.

Use tinned marine-grade 16 AWG (1.3 to 1.5 mm²) speaker wire to connect speakers. This type of wire is designed to withstand harsh marine environments.

These Fusion XS Classic 7.7" marine speakers have a sensitivity of 92 dB. High sensitivity means the speakers can produce a high sound volume with relatively low input power.

The box contains the following items:

2 Fusion XS Classic 7.7" marine speakers
12 Phillips stainless steel mounting screws (4.2 mm x 25.4 mm)
1 mounting template
Speaker grilles