JL Audio mounting kit (93708)

This Garmin mounting bracket (ref. 010-13875-00) is designed to install JL Audio VeX™ speaker systems on round tubes (roll cages) in marine environments. It features swivel mounts.

This mounting bracket stands out for its robust and versatile design, featuring low-profile machined fastenings to create solid anchor points. It is designed to withstand marine elements and is manufactured in the United States by Axia Alloys.

Yes, the mount has a marine-grade finish and the supplied hardware is designed for outdoor durability, ensuring consistent performance in harsh conditions.

This mounting bracket is manufactured in the United States by Axia Alloys.

Yes, this mount is protected by US patents #8,136,771 and #8,398,035.

The product reference number (SKU) for this item is 010-13875-00.

The brand of this mounting bracket is Garmin.

This mounting bracket is specifically designed for JL Audio VeX™ speaker systems.

This mount is compatible with a variety of round tube diameters (roll cages), allowing versatile installation.

The mounting kit includes the following components:

4 Axia Alloys clamps
6 M6 x 16 mm socket head screws
2 M4 x 4 mm set screws (pre-installed)
4 M6 nylstop nuts
2 clamp receivers
1 tube of Loctite® Red threadlocker
4 M6 flat washers
4 M6 x 45 mm socket head screws
1 plastic strip

Yes, a Loctite® Red thread-locking compound is included in the mounting kit.

Yes, the installation instructions state that the speaker can be rotated to the desired angle. To do this, loosen one screw, rotate the speaker, then reinstall and tighten the mounting screws and washers.

Yes, the M4 x 4 mm set screws are pre-installed in the collar receiver of the mount.

After placing the supplied plastic strip around the tube to protect it, push the clamps onto the tube. Then align the clamps with the clamp receiver on the speaker housing.

M6 x 16 mm countersunk screws are used to secure the bracket to the speaker base. They are inserted through the slots of the collar receiver and into the appropriate holes in the bracket base, then fully tightened.

This product is warranted by JL Audio against defects in materials and workmanship for a period of two (2) years from the original purchase date.

No, the warranty is not transferable and applies only to the original buyer from an authorized JL Audio dealer.