AC Circuit Breaker Gen 2 - Single Pole 230 VAC, 40 A, Long Time Delay

The Raymarine Gen 2 AC circuit breaker is a 230 VAC single-pole component rated at 40 A, specifically designed for protecting alternating current circuits on board vessels. It features a long delay trip characteristic.

Its primary function is to provide reliable protection for electrical circuits against overcurrents. It operates at a rated current of 40 amperes and a voltage of 230 VAC, ensuring the safety of installations.

The maximum rated current this circuit breaker is designed to handle is 40 amperes, providing adequate protection for the corresponding circuits.

This circuit breaker is of the single-pole type, meaning it is designed to protect a single phase conductor in an AC circuit.

The "long delay trip" characteristic means the circuit breaker is designed to tolerate temporary overloads or high inrush currents without tripping immediately. This is particularly useful for equipment with a high power draw at startup.

Yes, this circuit breaker is designed to be field-replaceable, which greatly simplifies maintenance or replacement operations if necessary.

In a modern marine electrical system, this Raymarine circuit breaker not only protects AC circuits against overcurrents but also enables remote tripping and reactivation, as well as circuit status monitoring. It thus contributes to centralized and secure power management.

Yes, with a 230 VAC voltage and a 40 A protection, this circuit breaker is perfectly suited to the requirements of European marine electrical installations.

This circuit breaker is designed to integrate specifically into advanced electrical distribution systems, such as the Maretron OctoPlex G2-Series architecture, enabling centralized and digital power management.

Yes, when integrated into the Maretron OctoPlex G2-Series system, this circuit breaker is part of an NMEA 2000® certified system. This allows its control and monitoring via the NMEA 2000® network.

Yes, thanks to its integration into the Maretron OctoPlex G2-Series system, information about circuits (voltage, current, frequency) can be monitored and displayed on a compatible NMEA 2000 multifunction display (MFD).

Yes, the Maretron OctoPlex G2-Series system, for which this circuit breaker is designed, allows monitoring and control of other NMEA 2000 marine devices, such as compasses, GPS units, or tank level adapters.

The Maretron OctoPlex G2-Series system, into which this circuit breaker integrates, is certified and approved to several important standards:

Approved IEC/EC 60533 (Electrical and electronic installations in ships) IEC 60945 (Marine navigation and radio-communication equipment and systems) Approved NMEA 2000® (Certified, Category B) Approved Lloyd’s Type (Test Specification #1, ENV2 Certificate No. 10/00021)

This circuit breaker integrates as an essential component within an OctoPlex AC power distribution unit. It provides AC circuit protection, remote tripping and reactivation, as well as state monitoring, all managed via the OctoPlex system's CAN bus network.

Yes, when integrated into the Maretron OctoPlex G2-Series system, this circuit breaker can be monitored and reset remotely via the NMEA 2000 network, providing increased flexibility in power management.

Yes, integrating this circuit breaker into a system like the OctoPlex G2-Series significantly reduces wiring weight and installation complexity, as it eliminates the need for extensive wiring to traditional electrical panels.

Yes, by integrating into the Maretron OctoPlex G2-Series system, this type of circuit breaker eliminates the need for large traditional electrical panels through centralized, digital circuit management.

Yes, the Maretron OctoPlex G2-Series system, in which this circuit breaker is used, is based on a CAN bus network with a redundant architecture. This ensures increased reliability and safety by eliminating single points of failure.

Yes, the Maretron OctoPlex G2-Series system, with which this circuit breaker is used, allows configuring alarm thresholds for voltage, current, and AC line frequency. These alarms can be displayed via a compatible NMEA 2000 multifunction display (MFD).

This Gen 2 single-pole AC circuit breaker from Raymarine is specifically designed for protecting alternating current circuits aboard vessels. It is intended for integration into AC power distribution units (AC Power Distribution Units) of the Maretron OctoPlex G2-Series system.

Main features:

Type: Single-pole
Rated voltage: 230 V AC
Rated current: 40 A
Tripping delay: Long
Within the OctoPlex G2-Series system, this circuit breaker provides overcurrent protection and offers advanced features such as remote tripping and reactivation, as well as status monitoring via the NMEA 2000® network. This system is NMEA 2000® certified and Lloyd’s Type Approved, ensuring reliability and safety for marine electrical installations.