Free pickup point for orders over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

via our network of certified installers

Find an installer

Support service

Choose additional installation support

Säästad 23%

B&G

000-14397-001

B&G kaabel WS300/700 35m

B&G mast cable, 35 meters, part number 000-14397-001, for connecting wired wind sensors from the WS300 (WS310) and WS700 series to their NMEA 2000 interface. This long version is the ideal solution for large sailboats, offering greater installation flexibility compared to the standard 20m cable.

Includes: 35m cable with pre-molded male and female Micro-C connectors.

Public priceGet pro pricing

133,62€

133,62€ ~~175,14€~~

Käibemaksuga Tarne arvutatakse makse tegemise ajal.

Laosolekus

Free pickup point for orders over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

via our network of certified installers

Find an installer

Support service

Choose additional installation support

Technical specifications

Lõikeala (mm²)	0.82
Lõikeala (AWG)	18.0
Juhtmete arv	5.0
Värv	Black
Maksimaalne pinge	60.0
Varjestus	Shielded
Paindlikkus	Flexible
Voolutüüp	DC
Välisläbimõõt	7.0
Nimivool	5.0
Katte materjal	PVC
Juhtme materjal	Tinned copper
Sertifikaadid	CE
Juhtme viimistlus	Tinned
Kaabli tüüp	CAN-bus cable
Kaabli pikkus	35.0
Ühilduv võrgustik	NMEA 2000
Eelvormitud ühendurid	Yes, Micro-C male and female
Paigalduskoht	Sailboat mast
Kaabli rakendusala	Connecting wind sensor (WS300/700) to NMEA 2000 network
Töötamise temperatuur	-20 to +70
Salvestustemperatuur	-25 to +85
Minimaalne painderaadius	35
Ühenduse tüüp	Micro-C male and female
Varjestuse tüüp	Sheet and braid
UV-kiirguse vastupidavus	High
Anemomeetri ühilduvus	B&G WS310 / B&G WS700
Anduri ühilduvus	B&G WS310 / B&G WS700
Välisläbimõõt	6
Juhtme viimistlus	Tinned
Kaabli pikkus	35
Juhtme juhtide arv	4
Toote tüüp	Cable
Voolutüüp	DC
Kaabli tüüp	Control cable
Ühiku kaabli pikkus	meters

Detailed description

B&G 000-14397-001 kaabel on mõeldud traadiga tuuleanduritele seeria WS300 ja WS700. 35 meetri pikkusega ühendab see anemomeeter-girouette peamasti tipus asuva anduri tema NMEA 2000 liidesega, mis on paigaldatud tekieelse all.

Expert review

Pol CONIN

Digitaalarenduse vastutaja

« Asendamatu ühendus B&G anduritega suurematel mastidel »

Tuuleandmete edastamine mastipea küljest nõuab absoluutset töökindlust, ning B&G WS300/700 35 meetri pikkune kaabel ongi selle arhitektuuri tõeline selgroog. See on välja töötatud spetsiaalselt purjelaevadele, millel on suured mastid või millel on vajadus keerukate trajektide järele kuni alumise laevapõhja liidesele, tagades ühenduse ilma viivitusteta kõrgtäpsete seiresüsteemide WS310 või WS700 sarjade juhtmega tuuleandurite ja pardal olevate NMEA 2000 võrguga.

Kasutuses eristab seda termoplasti materjali kvaliteet, mis tagab erilise vastupidavuse vaenulike keskkondade, mastisüsteemi pidevate vibratsioonide ning mastimise ja demastimise ajal tekkivate mehaaniliste koormuste vastu. See mastikaabel on varustatud tehases valatud Micro-C ühenduritega, mis tagavad täieliku veekindluse ja kõrge turvalisuse "plug-and-play" ühenduse. Hoides signaali ja toite (12V DC) terviklikkust 35 meetri pikkusel kaablil, tagab see pardal olevatele arvutitele ja näidikutele tuule nurga ja kiiruse andmete edastamise kõrge täpsusega, mis on oluline nii jõudluse optimeerimiseks kui ka autopiloodi reageerimise kiiruse jaoks.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

B&G kaabel WS300/700 35m

133,62€

133,62€ ~~175,14€~~

Complete your installation with

Complementary equipment

Navico

Kompass Precision 9

Ref : 000-12607-001

615,96€

615,96€ ~~842,94€~~

Obsolète

B&G

H5000 CPU Performance

Ref : 000-11547-001

2.948,14€

2.948,14€ ~~3.478,80€~~

B&G

Triton Edge protsessor

Ref : 000-15134-001

1.379,70€

1.379,70€ ~~1.902,60€~~

Obsolète

B&G

H5000 CPU Hydra

Ref : 000-11545-001

1.116,79€

1.116,79€ ~~1.438,80€~~

B&G Pupitre de commande du pilote automatique Triton²

B&G Pupitre de commande du pilote automatique Triton² - photo 2

B&G

Triton² autopiloodi juhtpaneel

Ref : 000-13296-001

325,56€

325,56€ ~~434,70€~~

Frequently asked questions

Need help? Contact us

Which wind sensors is this cable compatible with?

This cable is specifically designed for use with B&G wired wind sensors from the WS310 and WS700 series.

What types of connectors are installed on this cable?

The cable is fitted with male and female Micro-C connectors. They are factory-molded to ensure a reliable and watertight connection.

Can I cut this cable if it is too long for my installation?

No, you must absolutely not cut this cable. The connectors are factory-molded to ensure a perfectly watertight and reliable connection. Cutting the cable would void these advantages and could cause failures.

Is this cable compatible with the B&G WS320 wireless wind sensor?

No, this cable is not compatible with the WS320. The WS320 is a wireless model that does not require a mast cable. This product is intended for wired WS310 and WS700 sensors.

Where do the two ends of this cable connect?

One end of the cable connects to the wind sensor (WS310 or WS700) at the masthead. The other end plugs into the NMEA 2000 interface dedicated to the sensor, which is typically installed inside the boat.

Is the cable sheath resistant to marine environments?

Yes, the cable has a thermoplastic sheath designed to provide durable resistance to demanding marine conditions, including vibrations, UV exposure, and mechanical stresses from mast movements.

Does this cable plug directly into a multifunction display?

No, this cable does not connect directly to a multifunction display. It links the wind sensor to its specific NMEA 2000 interface (connection box). This interface then transmits the data to your boat’s NMEA 2000 network.

Is the installation of the connectors complicated?

No, installation is very simple. The connectors are pre-molded and the system is designed for plug-and-play connection. Simply screw the connectors together to achieve a secure and watertight connection without manual wiring.

Is there another length available for this mast cable?

Yes, this 35-metre cable is the long-length alternative to the standard 20-metre cable, which is also available in the B&G range for WS310/WS700 sensors.

Can I use this cable with a sensor from another brand than B&G?

This cable is specifically designed and tested for B&G WS310 and WS700 sensors and their interface. Use with equipment from other brands is not guaranteed and not recommended.

How is the waterproofing of the connection ensured?

Waterproofing is ensured by Micro-C connectors, which are factory-molded directly onto the cable. This one-piece design eliminates potential water entry points that might exist with manually assembled connectors.

What is this cable used for exactly?

This mast cable is an essential component for transmitting wind data. It connects the wired wind sensor (anemometer-vane) located at the masthead to its interface to power the sensor and send wind information (speed and angle) to the boat's navigation system.

Is the cable NMEA 2000 type?

Yes, this is an NMEA 2000 cable using standard Micro-C connectors. It is however dedicated to the connection between the B&G wind sensor and its specific interface, and not for building a general NMEA 2000 backbone.

Are specific tools required to screw the connectors?

No, no specific tools are required to connect the plugs. Micro-C connectors are designed to be hand-tightened, ensuring a secure and watertight connection.

Does the product name mention WS300/700, is it compatible with the WS310?

Yes, absolutely. The WS300 series includes the WS310 model. This cable is therefore fully compatible with the B&G WS310 wired wind sensor, as well as with the WS700 series sensors.