Mootoripöördsolenoid 75A

A motor reversing solenoid is an electromechanical device that changes the direction of rotation of a DC motor. It acts as a power switch, directing current through the motor in different directions to reverse its movement.

This solenoid is designed for marine systems requiring bidirectional control of DC motors. It is ideal for applications such as windlasses, bow and stern thrusters, and other marine equipment where motor rotation direction reversal is necessary.

This solenoid is specifically designed to operate with 12V DC (direct current) electrical systems.

This solenoid can handle a continuous current of 75 amperes, making it suitable for moderate-power engines in marine applications.

Yes, this BEP solenoid is specifically described as a key component for power management in marine systems, ensuring operational reliability in this environment.

This solenoid is designed to control direct current (DC) motors that require rotation direction reversal, such as those found in windlasses or bow thrusters.

Although designed for marine systems, the description does not specify a particular ingress protection rating (IP). It is recommended to install it in a compartment protected from direct exposure to saltwater or weather to optimize its lifespan.

This solenoid is manufactured by BEP.

This solenoid is equipped with two types of terminals to facilitate integration:

5/16-24 threaded terminals for power connections.1/4

No, this solenoid is specifically designed for direct current (DC) applications and must not be used with alternating current motors.

No, the maximum capacity of this solenoid is 75 amperes. Using it with motors requiring a current higher than this value could lead to overheating and damage to the solenoid.

The solenoid must be connected between the 12V DC power source and the motor. The power terminals (5/16-24 threads) handle the current to the motor, while the 1/4" terminal blades are used for control signals that activate the reversal. It is critical to follow an appropriate wiring diagram to ensure correct and safe operation.

Yes, it is strongly recommended to install appropriate fuses or circuit breakers upstream of the solenoid and motor to protect the entire circuit from overloads and short circuits, in compliance with marine safety standards.

When installing on a boat, it is important to choose a location that is:

Dry and protected from direct water spray.Easily accessible for inspection and maintenance.Allowing adequate ventilation to prevent overheating.Where cable connections can be made securely and neatly.

For 5/16-24 terminal stud threads, adjustable wrenches or appropriately sized open-end wrenches are required. For 1/4" terminal blades, crimp sleeves and a crimping tool are needed for secure electrical connections.

The 1/4-inch terminal blades are used for control connections, i.e., to receive the signals that control the solenoid's activation and reverse the motor's direction.

The product description does not specifically mention the inclusion of a wiring diagram. However, for correct installation, it is essential to refer to the manufacturer's instructions for the engine or the overall system, or to consult a professional.

For proper integration, it is critical to verify that the solenoid specifications (12V DC, 75A maximum) match your engine and electrical system requirements. Also ensure that the terminal types (5/16-24 threads and 1/4" blades) are compatible with your existing wiring or that you have the necessary adapters.

A reversing motor solenoid like this one is an assembly of contactors that, when at rest, keeps the circuit open. It is neither 'normally open' nor 'normally closed' in the sense of a simple switch, as it is a three-position system (forward, reverse, stop) controlled by separate coils that close the appropriate circuits for each direction.