30/30HV kuvari B&G H5000/Triton süsteemile

The 30/30HV display is a high-performance mast-mounted instrument that offers:

A high-contrast LCD display with H-Vision technology.A bonded display (optically bonded) to prevent condensation and maximize clarity.A single connection via NMEA 2000 network for power and data.Very low power consumption.Dual backlighting (red and white) for night vision.Rugged design and IP67 waterproof certification.

The 30/30HV display is specifically designed to integrate and operate with B&G H5000 and B&G Triton instrument systems.

Installation is simplified thanks to a single connection. The display plugs directly into your boat's NMEA 2000 network via a Micro-C connector. This single cable provides both power (12V DC) and transmission of all navigation data.

Yes, absolutely. It features a high-contrast LCD screen with an "optically bonded" treatment that eliminates glare and condensation. The H-Vision technology and inverted "white on black" display ensure exceptional readability, even in intense sunlight.

The 30/30HV screen is designed for maximum energy efficiency. Its power consumption is 0.5W in typical use and 1.0W at maximum, which is very low and ideal for sailboats.

This display is designed to withstand the harshest marine conditions. It is IP67 certified, meaning it is fully protected against dust and can be submerged in water up to 1 meter deep for 30 minutes.

The 30/30HV display has the following dimensions:

Width: 249 mmHeight: 156 mmDepth: 50 mmIts weight is 1.2 kg.

Yes, the 30/30HV display is equipped with a dual backlight system for perfect night visibility. You can choose between red lighting, which preserves night vision, and white lighting.

No, the 30/30HV display is not designed to connect directly to a sensor. It must be wired to an existing NMEA 2000 network, which centralizes data from various sensors (wind, speed, depth, etc.) via an H5000 processor or a Triton system.

The display operates on a nominal 12V DC power supply. The accepted operating voltage range is from 10V to 16V DC.

You can configure and scroll through up to 14 customizable data pages. This allows you to display the most relevant information for your sailing, such as wind angle, speed over ground, heading, etc.

Yes, you can install multiple 30/30HV displays on your NMEA 2000 network. This is a common setup on racing sailboats to simultaneously display different critical data on multiple displays at the mast foot.

To ensure durability in a marine environment, the screen is built with robust materials: the front panel is made of molded ABS and the rear housing is made of aluminum alloy.

For maximum readability even from a distance, the digits displayed on the 30/30HV screen are 63 mm high.

Yes, it is specifically designed as a mast-mounted instrument. Its ruggedness, IP67 waterproofing, and ultra-high-visibility screen make it ideal for mounting at the mast base, visible from the entire cockpit.

The 30/30HV display is designed to operate within a temperature range from -10°C to +55°C.

The display can show a wide variety of data from your H5000 or Triton system. The available data depends on the sensors connected to your network, but typically includes:

Wind angle and speed (true and apparent)Boat speed (Speed) and speed over ground (SOG)Heading (Cap) and course over ground (COG)DepthPerformance data (VMG – Velocity Made Good)Waypoint information

The 30/30HV display uses the NMEA 2000 protocol with Micro-C connectivity. To connect it to an older Simnet network, you would need a Simnet to Micro-C adapter cable, but full feature compatibility depends on the entire system.

Yes, the 30/30HV display is a repeater. It must be connected to a NMEA 2000 network managed by a processor, such as an H5000 CPU or the system of a Triton display, to receive and display sensor data.

To connect the display, you will need a free Micro-C T-connector (T-Joiner) on your NMEA 2000 backbone, as well as a Micro-C drop cable of the appropriate length to link the display to this T-connector.

The 30/30HV is a high-visibility mast display (HV stands for High Visibility) designed to be readable from the deck at a distance. It prioritizes legibility with 63 mm high digits and a reversed white-on-black display. The Graphic Display H5000 is a screen with richer graphical information, typically installed at the chart table. The 30/30HV is optimized for robustness and visibility at the masthead, while the Graphic Display provides more detailed graphical functions for navigation.

Yes, the 30/30HV display is designed to integrate natively with H5000 and Triton instrument systems. It connects via the NMEA 2000 network, enabling seamless communication with both systems. Ensure your NMEA 2000 network is properly configured and terminated for optimal operation.

The data is displayed with digits measuring 63 mm in height. This large size, combined with the inverted white-on-black display and H-Vision technology, enables instant readability from any point on the deck, even in full sunlight or low-light conditions.

Connection is made via a single NMEA 2000 port with a Micro-C connector. This cable provides both power and data transmission, significantly simplifying installation. Simply connect the display to your boat's NMEA 2000 bus using a Micro-C cable and a T-connector.

The 30/30HV display is designed for maximum energy efficiency. Its typical power consumption is 0.5 Watts, with a maximum of 1.0 Watt. On the NMEA 2000 bus, its consumption is approximately 0.6 Watts (50 mA at 12 V), which equals 1 LEN (Load Equivalency Number). It operates at a nominal 12 V DC, with a range of 10 to 16 V.

Yes, the 30/30HV display is IP67 certified. This standard ensures it is fully protected against dust and can be submerged in water up to 1 meter deep for 30 minutes. It is therefore perfectly suited for outdoor installation, including at the masthead or on deck, where it is exposed to spray and rain.

Yes, the 30/30HV display allows you to configure and scroll through up to 14 customizable data pages. You can select the information to display on each page, such as true wind angle, heading, speed over ground (COG/SOG), depth, or any other data available on your NMEA 2000 network.

The 30/30HV display features dual switchable night lighting between red and white. Red lighting preserves the crew's night vision, which is critical for night navigation. White lighting provides better readability when darkness is not a critical factor.

The 30/30HV display measures 249 x 156 x 50 mm (W x H x D). Its weight is approximately 1.2 kg. These compact dimensions and moderate weight make it suitable for masthead or deck mount installation.

The 30/30HV display can operate within a temperature range from -10°C to +55°C. This wide range ensures reliable performance in extreme weather conditions, whether in tropical climates or cold weather.

The 30/30HV display connects directly to the NMEA 2000 network. To integrate analog sensors (such as tank gauges or temperature sensors), you will need a B&G analog expansion module (sold separately) that connects to the network and converts analog signals into NMEA 2000 data.

The installation is designed to be straightforward thanks to the single NMEA 2000 connection. However, for masthead installation, it is strongly recommended to use a qualified professional to ensure safety and waterproofing. The installation manual provided by B&G details the steps, including drilling and wiring. Ensure you follow the cable routing guidelines to avoid interference.

H-Vision is B&G’s exclusive display technology, offering exceptional contrast and maximum readability even in bright sunlight. It combines a high-contrast LCD screen with optical bonding (optically bonded) that eliminates internal condensation and enhances clarity. Data is displayed in reverse mode (white on black) for instant reading.

The 30/30HV display is optimized for B&G H5000 and Triton systems. While it uses the NMEA 2000 protocol, which is a standard, its integration and advanced features (such as customizable pages and specific data display) are designed for these two systems. Its use with other brands may be limited and is not guaranteed.

The model number (SKU) for the 30/30HV display for the H5000/Triton system is 000-11089-001. This code allows precise identification when ordering or locating technical documentation.

Yes, the 30/30HV display can be integrated into a network that includes Zeus-series multifunction displays (MFDs). In this setup, the Zeus typically serves as the navigation hub, while the 30/30HV acts as a masthead repeater display. Data is shared via the NMEA 2000 network.

If the display does not power on, first check the power supply on the NMEA 2000 bus. Ensure the power cable is properly connected and the voltage is between 10 and 16 V. Also verify that the NMEA 2000 terminations are in place. Finally, inspect the Micro-C connector to confirm it is fully seated and free of corrosion.