Tuulelipu asenduskõõs B&G WS300/700 sensoritele

Yes, this wind transducer is the official spare part and is therefore fully compatible with the B&G WS310 wired wind sensor.

Yes. This spare part is designed to be compatible with the B&G WS320 wireless wind sensor, which is part of the WS300 series.

No, this wind transducer is specifically designed for B&G WS300 and WS700 wind sensor series. It is not compatible with previous generations of sensors.

No, this is not a universal part. It is specifically manufactured for B&G models in the WS300 series (including WS310, WS320) and WS700.

As an original B&G part, it guarantees:

Perfect fit on the sensor.
Maintenance of aerodynamic performance tested in wind tunnel.
Preservation of measurement accuracy for your navigation system.

This product is a replacement wind transducer designed to restore the original performance of a B&G WS300 or WS700 wind sensor whose wind vane has been damaged or lost.

Yes, this is a certified original B&G part, bearing the manufacturer reference 000-15144-001.

A damaged wind transducer directly affects the accuracy of wind angle and speed measurements. Replacing it is crucial for the reliability of navigation data and the proper operation of the autopilot.

The product includes only the replacement wind vane for WS300/700 sensor. The other parts of the sensor, such as the anemometer (cups) or the sensor body, are not included.

The WS300/700 sensor design is the result of over 500 hours of wind-tunnel testing. Using the original wind transducer is essential to maintain this optimized profile and ensure stable, accurate wind data.

The manufacturer reference (SKU or Part Number) for this replacement wind transducer is 000-15144-001.

This wind transducer is installed directly on the B&G WS300 or WS700 wind sensor unit, which is typically mounted at the top of the sailboat’s mast.

Installation generally does not require special tools. However, it is essential to take all necessary safety precautions to access and work at the masthead.

Yes, after replacing the wind transducer, a calibration procedure to align the sensor is strongly recommended. This ensures the instrument displays the correct wind direction relative to the boat's heading.

The part is designed for direct fitting, which simplifies mechanical replacement. The main difficulty lies in safely accessing the sensor, which is located at the top of the mast.

Yes, as an official and certified B&G spare part, its use is the only way to ensure the integrity and warranty of your WS300 or WS700 wind sensor.

This wind transducer is specifically designed and certified for B&G wind sensors in the WS300 and WS700 series. Its use with products from other brands, even within the same group, is not officially guaranteed by B&G.