187 seeria katkestusseade – 80 A pinnasele monteeritav

The Blue Sea 187 series circuit breaker is a thermal protection device designed for marine electrical systems. It is specifically rated for 80 A and mounts on the surface, making installation on electrical panels or bulkheads straightforward.

The primary function of this circuit breaker is to protect electrical systems and wiring from overcurrents and short circuits. In the event of an overload, it automatically cuts off the circuit to prevent damage to equipment and fire hazards.

This circuit breaker is designed to operate with a maximum voltage of 48 V DC, making it compatible with a wide range of marine electrical systems, including 12 V, 24 V, and 36 V setups.

Yes, this circuit breaker has an IP66 ingress protection rating. This means it is protected against powerful water jets and temporary immersion, making it ideal for exposed marine environments.

Yes, the Blue Sea 187 series circuit breaker is a resettable thermal circuit breaker. After tripping due to an overcurrent, it can be manually reset once the cause of the overload has been identified and corrected, eliminating the need to replace fuses.

Yes, Blue Sea Series 187 circuit breakers are typically designed to be ignition-protected, making them safe for use in boat engine compartments where flammable vapors may be present.

This circuit breaker uses 5/16"-18 stainless steel stud terminals, providing a robust and corrosion-resistant electrical connection essential in a marine environment.

Compared to a fuse, this circuit breaker offers several advantages:

Resettable: It can be manually reset after tripping, avoiding the need to replace parts. Precise thermal protection: It provides accurate protection against overcurrent conditions. Durability: Its robust design and IP66 rating make it more resistant to marine environments.

This circuit breaker is designed to operate effectively across a wide temperature range, typically from -40°C to +85°C, ensuring reliability in various marine weather conditions.

Yes, Blue Sea Systems products, including the 187 series, are generally designed to meet ABYC (American Boat and Yacht Council) and SAE (Society of Automotive Engineers) standards for marine electrical equipment, ensuring their safety and performance.

The circuit breaker is made with robust, corrosion-resistant materials suited to the marine environment. It typically features a thermoplastic housing and stainless steel studs.

This circuit breaker is designed for surface mounting. It is typically secured with two screws (not included) on a flat surface, such as an electrical panel or a bulkhead. The wiring is then connected to the studs.

To surface-mount this circuit breaker, you will need two mounting screws (typically size #10), tools for tightening cable connections to the studs (wrenches or sockets), and appropriately sized electrical cables rated for 80 A.

This circuit breaker should be installed in a location that is easily accessible for manual reset but protected from direct physical impacts. With its IP66 rating and ignition protection, it can be installed in damp compartments or even in the engine room.

When installing wiring, ensure you use cables with an adequate cross-section to handle 80 A and prevent overheating. Connections to studs must be clean, tight, and protected against corrosion. It is also essential to disconnect the power supply before any work.

Yes, this 80 A circuit breaker is fully suitable for 12 V marine electrical systems. Its maximum 48 V DC rating allows it to operate without issues in lower-voltage configurations.

Yes, since the maximum voltage rating of this circuit breaker is 48 V DC, it is fully compatible and can be safely used with 24 V and 36 V marine electrical systems.

This 80 A circuit breaker is ideal for protecting intermediate to high-power circuits. It is commonly used for equipment such as windlasses, bow thrusters, medium-sized inverters, high-flow bilge pumps, or main distribution circuits on boats.

Yes, as a Blue Sea Systems product, this circuit breaker is designed to integrate seamlessly with other brand components such as busbars, distribution panels, or battery switches, to create a coherent and reliable marine electrical system.