Kaablikinnitus CableClam külgsuunaga, lõpetusega roostevabast terasest

The side-entry CableClam has a length of 56.80 mm (2.24 in) and a width of 53.35 mm (2.10 in). With the cap installed, the total height is 19.69 mm (0.78 in).

The cable opening measures 15.51 mm (0.61 in) in width and 14.16 mm (0.56 in) in height. This makes it suitable for medium-sized cables, such as those used for deck lighting, sensors, or antennas.

To install the CableClam, follow these steps:

Pass the cable through the central hole of the gasket.Insert the cable into the groove of the deck ring.Tighten the deck ring and gasket to the surface by turning each screw a few turns at a time. Do not overtighten the screws.Press the stainless steel cap onto the assembly, aligning the cap's groove with the cable.

The stainless steel cap provides superior resistance to UV and corrosion compared to fully plastic versions. It also adds an aesthetic touch and ensures increased durability in demanding marine environments.

The CableClam mounting holes are designed for #8 size screws. It is important not to overtighten the screws during installation to avoid damaging the product or the mounting surface.

This side-entry CableClam routes cables parallel to the mounting surface, optimizing deck integration and reducing cable bend stress. Traditional cable glands often have a perpendicular cable exit relative to the surface.

Yes, the CableClam is designed for marine environments. Its stainless steel cap provides superior resistance to UV and corrosion, making it a durable and robust solution for ship decks.

Yes, it is important not to overtighten screws when securing the deck ring and gasket to the surface. Tighten each screw a few turns at a time until it is firmly in place, but without applying excessive force.