Deckhand Dimmer - 12V DC 6A - Deckhand Dimmer - 12V DC 6A

Deckhand Dimmer - 12V DC 6A - Dimensioned Drawing

Free pickup point for orders over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

via our network of certified installers

Find an installer

Support service

Choose additional installation support

Säästad 11%

Blue Sea Systems

7506-BSS

Deckhand regulaator – 12 V alalisvool 6 A

Q: What type of lighting can the Deckhand 7506-BSS dimmer control?

The Deckhand 7506-BSS dimmer is designed to digitally control the brightness of unregulated LED lights, incandescent lights, and halogen lights.

Q: What is the nominal operating voltage of this Blue Sea Systems dimmer?

This dimmer operates at a nominal voltage of 12 V DC.

Q: What is the input voltage range accepted by the Deckhand 7506-BSS drive?

The Deckhand 7506-BSS drive operates within an input voltage range of 9 V to 16 V DC.

Q: What is the maximum output current capacity of this drive?

The maximum output current capacity of the Deckhand 7506-BSS drive is 6 A.

Q: What is the function of the integrated 'Bulb Saver' in the dimmer?

The 'Bulb Saver' function (bulb saver) is designed to prevent excessive aging of bulbs during the charging phases of the boat's electrical system.

Q: Does the dimmer store the last brightness setting?

Yes, the Deckhand 7506-BSS dimmer has memory for the last brightness setting used.

Q: What is the operating temperature range of this variable frequency drive?

The variable frequency drive is designed to operate across a wide temperature range, from -40 °C to 85 °C.

Q: What is the maximum leakage current of the device?

The maximum leakage current of the Deckhand 7506-BSS drive is less than 2 mA.

Q: What type of brightness control is used by the Deckhand dimmer?

The dimmer uses continuous pulse-width modulation (PWM) control, allowing adjustment from 0 to 100% of the input voltage.

Q: Is this autopilot drive supplied with a switch?

Yes, the autopilot drive is supplied with a momentary (ON)-OFF-(ON) switch.

Le variateur Deckhand 7506-BSS de BLUE SEA est une solution numérique de 12 V CC et 6 A pour le contrôle de l'intensité des éclairages marins (LED non régulées, incandescents, halogènes).

Il offre une modulation PWM continue, une mémoire de réglage, et une fonction "bulb saver", et est livré avec un interrupteur momentané (ON)-OFF-(ON).

Ce modèle, qui remplace les 7501/7502, fait partie de la gamme Deckhand, reconnue pour sa fiabilité et sa conformité aux normes ISO 8846 et SAE J1171.

Pinge: 12 V

12 V 24 V

Vool: 6 A

6 A 12 A

Public priceGet pro pricing

98,34€

98,34€ ~~110,58€~~

Käibemaksuga Tarne arvutatakse makse tegemise ajal.

Laosolekus

Free pickup point for orders over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

via our network of certified installers

Find an installer

Support service

Choose additional installation support

Technical specifications

Juhtimisliidese tüüp	Numérique (PWM)
Juhtimise tüüp	Interrupteur momentané (ON)-OFF-(ON)
Ühilduvad valgustussüsteemid	LED non régulées, incandescentes, halogènes
Zone Control	Non
Tööpinge vahemik	9-16
Tüüpiline elektritarve	<0.024
Paigalduse tüüp	Montage sur panneau
Toote mõõtmed	82.55 x 88.9 x 44.45
Dimmimise toetus	Oui
Pakendi sisu	Variateur Deckhand, interrupteur momentané (ON)-OFF-(ON)
Sertifikaadid	CE,ISO 8846,SAE J1171,SAE J1455,SAE J1113
Tootjanimi	BLUE SEA SYSTEMS
Tootja partii number	7506
Maximum Output Current	6
Maximum Parasitic Current	2
Nimipinge	12
Maksimaalne töötemperatuur	85
Minimaalne töötemperatuur	-40
Toote SKU	7506-BSS

Detailed description

Valmistatud merevalgustiku juhtimiseks, BLUE SEA SYSTEMSi Deckhand 7506-BSS regulaator võimaldab täpse digitaalse valgustuse intensiivsuse reguleerimise. Seade on ühilduv reguleerimata LED-, hõõglamp- ja halogeenvalgustitega, mis töötavad nimipingel 12 V alalisvoolu, tööpinge vahemikus 9 V kuni 16 V.

Tehnilised omadused ja sooritus

Deckhand 7506-BSS regulaator kasutab pidevat pulse-width modulation (PWM) kontrolli, võimaldades reguleerida sisendpinget 0% kuni 100%. Maksimaalne väljundvool on 6 A, samal ajal on püsivool alla 2 mA. Seade töötab laias temperatuurivahemikus, -40 °C kuni 85 °C. Lampide eelhoiatusfunktsioon takistab lampide varajast vananemist süsteemi laadimise ajal. Mudelil on mälufunktsioon viimase heledusasetuse jaoks ning valgustatud väljund, mille viivis on reguleeritav 1 kuni 5 minuti vahel, et lihtsustada väljumist. Eemaldatud kinnitusjalad võimaldavad paigaldada mitu regulaatorit lähedale, ning see on varustatud hetkeühendusega lülitiga (ON)-OFF-(ON).

Positsioneerimine ja vastavus

Deckhand 7506-BSS regulaator on mitmekülgne valgustuse juhtimise lahendus madala kuni keskmise võimsusega merevooluringides. Deckhand seeriast on see 12 V alalisvoolu vähim võimsus (6 A) mudel, mida täiendavad suuremate vajaduste jaoks 7507 (12 A) ja 7508 (25 A) mudelid, samuti 24 V alalisvoolu versioonid (7504, 7509). See regulaator vastab süütemisevastaste standardite ISO 8846 ja SAE J1171 nõuetele ning on märgistatud CE-ga, tagades töökindluse ja ohutuse merekeskkonnas. See asendab varasemaid 7501 või 7502 mudleid, pakkudes parendatud funktsionaalsust mõõtmetega 82,55 mm laius ja 88,9 mm kõrgus.

Documentation

Type	Nom
	EN - Instructions - Deckhand Dimmer - 12V DC 6A
	EN - Deckhand Dimmer - Deckhand Dimmer - 12V DC 6A

Payment and security

Your payment information and data are processed securely.

Deckhand regulaator – 12 V alalisvool 6 A

98,34€

98,34€ ~~110,58€~~

Complete your installation with

Complementary equipment

Coupe-batterie à distance ML-RBS avec commande manuelle - 12V DC 500A - ML-RBS Remote Battery Switch with Manual Control - 12V DC 500A

Coupe-batterie à distance ML-RBS avec commande manuelle - 12V DC 500A - Wiring Diagram

Blue Sea Systems

Kaugpatarei lüliti BLUE SEA ML-RBS, käsitsikommando - 12 V alalisvool 500 A

Ref : 7700B-BSS

245,71€

245,71€ ~~297,48€~~

Sélecteur de batterie e-Series 4 positions - Mounting Diagram

Blue Sea Systems

Batteriavaliku lüliti e-Series 4 positsiooni

Ref : 9001EB-BSS

63,31€

63,31€ ~~70,80€~~

Blue Sea Systems

Ampèremõõtur M2 DC

Ref : 1832-BSS

419,60€

419,60€ ~~466,08€~~

Mini OLED DC Voltmeter - Yellow - Mini OLED DC Voltmeter - Yellow

Blue Sea Systems

Mini alaldur OLED alalisvoolu jaam - kollane

Ref : 1733-BSS

52,97€

52,97€ ~~64,44€~~

Relais de charge automatique ML-ACR avec contrôle manuel - 12V DC 500A - ML-ACR Automatic Charging Relay with Manual Control - 12V DC 500A

Relais de charge automatique ML-ACR avec contrôle manuel - 12V DC 500A - Wiring Diagram

Blue Sea Systems

Automaatne laadimisrelais ML-ACR manuaalse juhtimisega – 12 V alalisvool 500 A

Ref : 7622B-BSS

245,47€

245,47€ ~~362,28€~~

12/24V Dual USB 4.8A Chargers - Switch Mount - 12/24V Dual USB 4.8A Chargers - Switch Mount

Blue Sea Systems

Topelt USB-laadijad 12/24 V 4,8 A - Montaaž lülitisse

Ref : 1039-BSS

48,18€

48,18€ ~~57,72€~~

Dash Socket 12V DC with Watertight Cap - Dash Socket 12V DC with Watertight Cap

Dash Socket 12V DC with Watertight Cap - Socket Dimensioned Drawing

Blue Sea Systems

12 V alalisvoolu tahvelpaneeli pistikupesa veekindel kaasaga

Ref : 1011-BSS

13,96€

13,96€ ~~15,72€~~

Kit de conversion de panneau 360° - 12 à 24 V CC - 360 Panel Conversion Kit - 12 to 24V DC

Blue Sea Systems

360° paneeli 12–24 V alalisvoolu muundurikomplekt

Ref : 4113-BSS

10,56€

Alarme Floyd Bell Turbo Série - Floyd Bell Turbo Series Alarm

Blue Sea Systems

Floyd Bell Turbo seeria häire

Ref : 1070B-BSS

29,27€

29,27€ ~~34,98€~~

Frequently asked questions

Need help? Contact us

What type of lighting can the Deckhand 7506-BSS dimmer control?

The Deckhand 7506-BSS dimmer is designed to digitally control the brightness of unregulated LED lights, incandescent lights, and halogen lights.

What is the nominal operating voltage of this Blue Sea Systems dimmer?

This dimmer operates at a nominal voltage of 12 V DC.

What is the input voltage range accepted by the Deckhand 7506-BSS drive?

The Deckhand 7506-BSS drive operates within an input voltage range of 9 V to 16 V DC.

What is the maximum output current capacity of this drive?

The maximum output current capacity of the Deckhand 7506-BSS drive is 6 A.

What is the function of the integrated 'Bulb Saver' in the dimmer?

The 'Bulb Saver' function (bulb saver) is designed to prevent excessive aging of bulbs during the charging phases of the boat's electrical system.

Does the dimmer store the last brightness setting?

Yes, the Deckhand 7506-BSS dimmer has memory for the last brightness setting used.

What is the operating temperature range of this variable frequency drive?

The variable frequency drive is designed to operate across a wide temperature range, from -40 °C to 85 °C.

What is the maximum leakage current of the device?

The maximum leakage current of the Deckhand 7506-BSS drive is less than 2 mA.

What type of brightness control is used by the Deckhand dimmer?

The dimmer uses continuous pulse-width modulation (PWM) control, allowing adjustment from 0 to 100% of the input voltage.

Is this autopilot drive supplied with a switch?

Yes, the autopilot drive is supplied with a momentary (ON)-OFF-(ON) switch.

What are the physical dimensions of the Deckhand 7506-BSS autopilot drive unit?

The dimensions of the Deckhand 7506-BSS autopilot drive unit are:

Width: 3.25 inches (82.55 mm)Height: 3.5 inches (88.9 mm)

Is this variable frequency drive compliant with safety and regulatory standards?

Yes, the Deckhand 7506-BSS variable frequency drive is CE marked and compliant with the ignition protection requirements of ISO 8846 and SAE J1171.

Can I use this dimmer with LED lights that are already regulated?

No, this dimmer is specifically designed to control the intensity of unregulated LEDs. It may not work properly or could damage regulated LEDs.

Is this variable thruster compatible with a 24 V DC electrical system?

No, the 7506-BSS model is designed for 12 V DC systems. For 24 V DC systems, other models in the Deckhand range are available, such as the PN 7504 or 7509.

Can this dimmer be used with other types of bulbs than LEDs, incandescent or halogen?

The dimmer is specifically designed for unregulated LED lighting, incandescent and halogen bulbs. Use with other types of bulbs is not guaranteed and may not work properly.

How does the delayed illuminated output function work?

The illuminated output function keeps the lights on for an adjustable duration after turning off the dimmer. Here’s how to set it:

1-minute delay: Hold the switch in the high (illuminated) position for 2 seconds. The lights will flash. Release the switch after the first flash. The lights will stay on for 1 minute.Delays of 2 to 5 minutes: Hold the switch in the high (illuminated) position for 1 to 4 seconds after the first flash. Release the switch after 2 to 5 flashes. The lights will stay on for 1 minute per flash, up to a maximum of 5 minutes.

Is it possible to install multiple Deckhand winch drives side by side?

Yes, the Deckhand 7506-BSS winch drive has offset mounting feet that allow multiple drives to be installed very close to each other.

Does the dimmer support multiple switch locations for brightness control?

Yes, the Deckhand 7506-BSS dimmer is designed to support multiple switch locations, providing installation flexibility.

How to adjust the delay for the lighted output function?

To adjust the delay for the lighted output function:

For a 1-minute delay: Hold the switch in the high (lit) position for 2 seconds until the lights flash once. Release the switch.For delays of 2 to 5 minutes: Hold the switch in the high (lit) position for 1 to 4 seconds after the first flash, then release the switch after the number of flashes corresponding to the desired minutes (e.g., 3 flashes for 3 minutes).

What are the main connections for installing the Deckhand dimmer?

The Deckhand dimmer's main connections are as follows:

+12V DC (red) : Positive power supply.Ground (black) : Ground.Lamp (blue) : Connection to the lighting.Up Input (white) : Input to increase brightness.Down Input (gray) : Input to decrease brightness.A (ON)-OFF-(ON) switch is included for brightness control.