Kahepoolne lüliti seeria A valge – ühepoolne 10 A

This circuit breaker is designed to protect marine electrical circuits from damage caused by current overloads and short circuits. It automatically interrupts the current flow when the intensity exceeds 10 amperes or in the event of a short circuit, and can be manually reset.

This circuit breaker is ideal for protecting low to medium current circuits on board, such as cabin lighting, small electronic devices (USB chargers, radios), bilge pumps, or other equipment requiring 10 amp protection.

Yes, this circuit breaker is an excellent resettable alternative to traditional fuses. If it trips due to an overload or short circuit, simply flip the switch to reset the circuit, eliminating the need to replace a blown fuse.

Yes, this circuit breaker is specifically designed by Carling Technologies, INC. for marine environments. Its construction and materials are selected to withstand the harsh conditions encountered aboard a vessel, including moisture and vibrations.

Yes, this circuit breaker complies with the European Low Voltage Directive 73/23/EEC and 93/68/EEC. It also meets the product safety specification EN 60934 for equipment circuit breakers and is CE marked, ensuring its suitability for European standards.

The CE marking indicates that the product complies with the essential requirements of the applicable European directives regarding safety, public health, and consumer protection. For this circuit breaker, this includes compliance with the Low Voltage Directive.

This circuit breaker is primarily designed and specified for marine applications at 32 Volts DC (direct current), which is standard for electrical systems on boats. If you are considering use in alternating current (AC), it is imperative to verify the detailed specifications from the manufacturer for this exact model to confirm its compatibility with the voltage and AC current type of your circuit.

Blue Sea Systems Series A circuit breakers are designed to operate across a wide temperature range, typically from -40°C to +85°C. This ensures their reliability in the diverse climatic conditions encountered at sea.

Designed for the marine environment, this circuit breaker is generally splash-resistant on its front face when correctly installed in a panel. However, it is not designed to be submerged or exposed to direct and powerful water jets.

This circuit breaker does not require any specific regular maintenance. It is designed to be reliable and maintenance-free. However, it is recommended to ensure that electrical connections remain clean and secure and that there is no visible physical damage.

This 10 A circuit breaker is designed to protect charging circuits and devices connected to the battery, but it is not typically used as the primary protection directly at the output of a high-capacity battery. For protecting battery banks or starting circuits, higher-capacity circuit breakers or battery isolators are often required.

A single-pole circuit breaker, like this model, protects and interrupts the current on a single conductor (usually the positive) of a circuit. A double-pole circuit breaker protects and interrupts the current simultaneously on two conductors (for example, the positive and negative, or the live and neutral in AC), which is necessary to fully isolate a circuit.

When the circuit breaker trips due to an overload or short circuit, the switch lever automatically moves to a mid-position or the "off" (stop) position. Simply reset it manually by moving the lever to the "on" (run) position after resolving the cause of the trip.

Yes, with a 32 Volts DC rating, this circuit breaker is perfectly suited for protecting electrical circuits operating at 12 Volts DC and 24 Volts DC, which are the most common voltages in marine applications.

Blue Sea Systems' A-series circuit breakers, manufactured by Carling Technologies, are typically constructed with robust heat-resistant thermoplastic materials designed for durability and safety in marine environments.