Kaitselüliti BLUE SEA seeria 285 – paneelmonteerimine 120 A

The BLUE SEA 285 series circuit breaker is designed to protect marine electrical circuits from overloads and short circuits. It automatically interrupts the current in case of failure, thereby preventing damage to equipment and wiring.

This BLUE SEA 285 series circuit breaker has a nominal current rating of 120 Amperes (A). It is suitable for applications requiring overcurrent protection up to this value.

This circuit breaker is designed for panel mounting. This allows for clean integration within the vessel's electrical panel, providing easy access for manual activation or reset.

Yes, unlike single-use fuses, this circuit breaker is manually resettable. After a trip due to overload or short circuit, it can be reactivated once the cause of the issue is resolved.

This circuit breaker is suitable for protecting high-power equipment onboard, such as windlasses, inverters, bow thrusters, or main distribution circuits.

Blue Sea Systems 285 series circuit breakers are generally designed to operate with 12V DC to 48V DC electrical systems. It is important to verify your system's specific voltage before installation.

Yes, Blue Sea Systems 285-series circuit breakers are generally ignition protected to SAE J1171. This makes them safe for installation in engine compartments of gasoline-powered boats.

Although exact dimensions are not provided here, this circuit breaker is designed for panel mounting and requires a specific cutout. It is recommended to consult the technical diagram or the manufacturer's product sheet for precise cutout and footprint dimensions.

Circuit breakers offer several advantages over traditional fuses:

They are resettable, eliminating the need for constant replacement after a trip.They provide more precise protection against overloads.They simplify the management of electrical incidents on board, enabling quick restoration of service after resolving the issue.

Yes, this circuit breaker is specifically designed by BLUE SEA SYSTEMS for marine applications. Its design and materials are selected to withstand harsh nautical environment conditions such as humidity and vibrations.

The 285 series circuit breakers are typically equipped with stud terminals for cable connections. It is essential to use appropriate cable lugs and tighten the nuts to the manufacturer's recommended torque to ensure a secure and reliable electrical connection.

No, this circuit breaker is a standalone unit that integrates protection and reset functions. It does not require an external fuse holder. For panel mounting, it installs directly into an appropriate cutout.

Yes, designed for the marine environment, this circuit breaker is made with corrosion-resistant materials. BLUE SEA SYSTEMS uses marine-grade components to ensure durability and reliability in humid and saline conditions.

The circuit breaker is designed for panel mounting and is usually supplied with the nuts and washers required to secure the terminals. However, the panel mounting screws and electrical cables with suitable terminals are generally not included and must be purchased separately.

Yes, Blue Sea Systems products, including the 285 series, are designed to meet safety and performance standards recognized in the marine industry, such as ABYC (American Boat and Yacht Council) and SAE J1171 ignition protection.

The reset button allows manual rearming of the circuit breaker after it has tripped due to an overload or short circuit. It also serves as a manual switch to cut or restore power in the protected circuit.

No, the BLUE SEA 285 series circuit breaker is specifically designed and certified for DC (direct current) applications only. Using this circuit breaker in an AC circuit could compromise its performance and safety.

Blue Sea Systems products are generally covered by a manufacturer’s warranty attesting to their quality and absence of manufacturing defects. For specific details regarding warranty duration and terms, consult Blue Sea Systems’ official documentation.