Kaitselüliti seeria 285 – pinnasele monteerimine 40 A

The BLUE SEA 285 Series circuit breaker is an electrical protection device designed specifically for marine circuits. This model, the 7182-BSS, has a 40-amp capacity and is intended for surface-mount installation. It protects equipment and cables from damage caused by overcurrents.

This circuit breaker has a rated current of 40 amperes (40 A). This means it is designed to operate normally up to this current and will trip if the value is significantly exceeded to protect the circuit.

This circuit breaker protects marine electrical circuits from overcurrent and short circuits. In the event of a fault or overload, it automatically interrupts the current to prevent damage to connected equipment and cables, ensuring the safety of the installation.

The main difference is that this circuit breaker is resettable. Unlike a fuse, which must be replaced after tripping, the 285 series circuit breaker can be manually reset once the cause of the overcurrent has been resolved, providing convenience and reducing the need for spare parts.

Yes, the BLUE SEA 285 series circuit breaker is specifically designed for the marine environment. It is manufactured with corrosion-resistant materials and features a robust design to withstand the harsh conditions encountered on board boats, including moisture and vibrations.

This circuit breaker provides thermal protection against overcurrents. It is designed to trip when the current exceeds its rated value for a given period, thereby protecting cables and equipment from overheating and damage.

This circuit breaker is equipped with a manual reset mechanism. After a trip caused by an overcurrent, you must identify and correct the cause of the overload. Then, you can reset the breaker by pressing the lever or reset button, depending on the specific model.

The Blue Sea 285 series circuit breaker is typically designed for direct current (DC) systems and can support a maximum voltage of 48V DC. It is compatible with 12V, 24V and 48V DC systems commonly used in marine applications.

The interrupting rating (AIC - Amperes Interrupting Capacity) of this circuit breaker is 3000 amperes at 48V DC. This indicates the maximum current the circuit breaker can safely interrupt during a short circuit without being damaged.

Yes, the Blue Sea 285 series surface-mount circuit breaker is rated IP67. This certification means it is dust-tight and can withstand temporary immersion in water (up to 1 meter for 30 minutes), making it suitable for exposed marine environments.

This circuit breaker is designed for surface mounting. This means it is fixed directly to a wall or panel using screws, without requiring any cutout for flush mounting. Its design allows for easy and quick installation.

The circuit breaker is mounted on a surface using screws. It has integrated mounting holes in its housing. Simply position the circuit breaker at the desired location, mark the drilling points, then securely screw it to the surface.

For the electrical installation of this circuit breaker, basic tools are generally required, such as screwdrivers, wire strippers, a crimping tool for cable terminals, and a socket or open-end wrench to tighten the nuts on the connection studs. Ensure you use the appropriate tools to guarantee safe connections.

Yes, the Blue Sea 285 series circuit breaker can be installed in any orientation (vertical, horizontal, or inverted) without affecting its performance or protective capability. This provides great flexibility for integrating it into various onboard electrical panel configurations.

Yes, this circuit breaker is fully compatible with marine electrical systems operating at 12V DC and 24V DC. Its maximum voltage rating of 48V DC makes it suitable for a wide range of low-voltage applications aboard vessels.

With a 40 A rating, this circuit breaker is suitable for protecting medium-power circuits. It can be used for equipment such as bilge pumps, small windlasses, navigation systems, DC-DC converters, or other significant onboard loads requiring overcurrent protection.

Yes, depending on the total consumption of your boat’s main circuit, a 40 A circuit breaker can be used to protect the main circuit, particularly on smaller installations. For larger boats with higher consumption, circuit breakers with higher amperage may be required.

No, the Blue Sea 285 Series circuit breaker is specifically designed and certified for direct current (DC) systems up to 48V DC. It must not be used for alternating current (AC) electrical installations, as it would not provide adequate protection and could be hazardous.

Although designed for the marine environment, this circuit breaker can technically be used in land-based or automotive applications requiring 40 A DC circuit protection, provided the voltage and current specifications match the system requirements. Its robustness and moisture resistance are also advantages in these contexts.