Liitin 20 A - 6 kontuuriga

The 20 A - 6 circuits BLUE SEA 2406-BSS terminal block is an electrical distribution component designed for marine applications. It organizes and secures low to medium power connections aboard your boat. This specific model provides six distinct connection points, each capable of handling a maximum current of 20 amperes.

A distribution terminal block consolidates and organizes multiple power or ground cables into a single point, or distributes power from a single source to multiple circuits. This reduces wiring clutter, improves clarity of the electrical installation, and simplifies maintenance of onboard systems.

This terminal block is a 6-circuit model, meaning it can handle up to six independent electrical connections. Each circuit is isolated from the others, allowing orderly power distribution.

Each circuit of the BLUE SEA 2406-BSS terminal block is rated for a maximum current of 20 amperes. It is critical not to exceed this value to ensure the safety and performance of your electrical installation.

Yes, the BLUE SEA 2406-BSS terminal block is specifically designed for marine environments. It is part of the Blue Sea Systems range, known for its robust and reliable products suited to the harsh conditions encountered at sea.

This terminal block is ideal for connecting equipment requiring stable and orderly distribution of low to medium power. This includes, for example, deck lighting, bilge pumps, fans, small electronic equipment, or other devices whose current does not exceed 20 amperes per circuit.

The 2406-BSS terminal block has an overall width of approximately 112.0 mm (4.41 in), a height of approximately 21.8 mm (0.86 in), and a depth of approximately 13.0 mm (0.51 in). These compact dimensions make it easy to integrate into tight spaces aboard.

To mount the BLUE SEA 2406-BSS terminal block, you will need #6 (M3.5) mounting screws. These screws ensure a solid and durable attachment of the terminal block to the chosen surface.

Cable connections to the 2406-BSS terminal block are made using #6 (M3) termination screws. It is recommended to use ring or fork crimp terminals suitable for these screws for secure and reliable connections.

The terminal block is secured using mounting screws that pass through the holes provided for this purpose on the block body. It is designed to be mounted on a flat and stable surface. The recommended mounting screws are type #6 (M3.5).

The distance between the mounting hole centers of the 2406-BSS terminal block is approximately 93.0 mm (3.66 in). This information is useful for pre-drilling during installation.

Although amperage is the main limitation (20 A per circuit), this type of Blue Sea Systems passive terminal block is typically designed for low-voltage marine systems, usually up to 32 V DC or 300 V AC/DC. Ensure that your system's voltage is compatible with the general specifications of terminal blocks in this category.

No, it is imperative not to exceed the 20 amp limit per circuit. Exceeding this current could cause overheating, damage the terminal block, and pose a safety risk to your electrical installation.

Yes, you can connect cables of different cross-sections, provided they are compatible with #6 (M3) terminal screws and associated ferrules. It is important that the ferrules fit correctly onto the screws to ensure a solid and secure electrical connection.

The BLUE SEA 2406-BSS terminal block is an open terminal block. The product description and images do not mention or show any protective cover included. It is designed to be installed in a protected location or within an appropriate housing if additional protection is required.

During installation, ensure all power sources are disconnected to avoid electrical hazards. Use appropriate tools and tighten the termination and mounting screws firmly but without over-tightening to prevent damage to the terminal block or cables. Always check polarity and correct sizing of cables and fuses.

Yes, the 2406-BSS terminal block is presented as an effective alternative to wider busbars, particularly when space is limited or when distribution must be localized for a specific group of devices. It provides an organized method to consolidate multiple cables.

Blue Sea Systems' 24XX series of 20 A terminal blocks includes other models with different circuit capacities, such as PN 2402 (2 circuits), 2404 (4 circuits), 2408 (8 circuits), and 2410 (10 circuits). The 2406-BSS model is the 6-circuit terminal block in this series.

The BLUE SEA 2406-BSS terminal block is a passive component and is supplied as-is, with no pre-installed wiring or additional accessories such as terminals or fuses. It is designed to be integrated into your electrical system with the cables and accessories you provide.