Free pickup point for orders over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

via our network of certified installers

Find an installer

Support service

Choose additional installation support

Säästad 20%

CZone

80-911-0013-00

CZone SI signaaliliides

The CZone SI (80-911-0013-00) signal interface integrates 6 versatile inputs (0-34V DC, 0-1000 Ohms) into the NMEA 2000 network for intelligent automation and monitoring. This IPX5 module is compatible with tank level sensors, switches, and voltage or resistive signals. It is supplied with the main module.

Public priceGet pro pricing

287,82€

287,82€ ~~362,16€~~

Käibemaksuga Tarne arvutatakse makse tegemise ajal.

Napp on lõppemas

Free pickup point for orders over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

via our network of certified installers

Find an installer

Support service

Choose additional installation support

Technical specifications

Toote kasutuse eesmärk	L'interface de signal CZone SI connecte le système CZone à des capteurs externes, des alarmes et des dispositifs de commutation, permettant un fonctionnement intelligent et automatisé des circuits en fonction de l'état de l'entrée.
Suhtlusprotokoll	NMEA 2000
Sisendite arv	6.0
Väljundite arv	0.0
Traadiga sisend	Connecteur NMEA 2000
Traadiga väljund	Connecteur NMEA 2000
Ühenduse tüüp	Connecteur NMEA 2000
MasterBus-iga ühilduv	Non
CZone-iga ühilduv	Oui
NMEA 2000 ühilduvus	Oui
Tööpinge vahemik	9-16 V DC
Montaažitüüp	Montage en surface
IP-tunnus	IPX5
Mõõtmed (L x K x S)	100 x 156 x 42 mm
Kaal	0.281
Alarm Trigger Conditions	Interrupteur de niveau d'eau élevé
Analoogsisendi takistuse vahemik	0-1000
Analoogsisendi pinge vahemik	0-34
Analog Input Voltage Range Precise	0-5
Toote barikood	80-911-0013-00
Sertifikaadid	CE, RCM, NMEA 2000
Ühilduvate seadmete seeriad	Tous appareils NMEA 2000
Data Transmission Category	Fluide, Température, Pression
Edastatavad andmed	Informations de fluide, de température et de pression
Digital Input Voltage Range	0-35
Korpuse materjal	Polycarbonate, ABS
Input Configurability	Oui
Input Signal Type	Interrupteurs (négatif, circuit ouvert, 0-35V DC), sondes de niveau de réservoir (0-5V, 10-180 Ohms, 240-33 Ohms), signaux voltaïques ou résistifs
Input Terminal Type	Bornier à vis
Paigalduskeskkond	Marin
Liidese tüüp	Interface de signal
Led Status Indication	Oui
MFD-ühilduvus	Tous appareils NMEA 2000
Operating Temperature Range C	-20°C à +55°C
Ülepingeni kaitse	Oui
Pakendatud kaal (kilogrammides)	0.363
Tüüpiline elektritarve (mA)	100
Toiteallikas	Alimentation via réseau NMEA 2000
Tootekategooria (tase 0)	Marchandise
Tootekategooria (tase 1)	NAVICO GROUP
Tootekategooria (tase 2)	04 - CZone (40)
Toote roll	Intégration de capteurs et interrupteurs externes
Toote seeria	CZone
Toote tüüp	Module d'interface de signal
Toote ruumala (cm³)	655.2
Storage Temperature Range C	-40°C à +85°C
System Automation Functions	Gestion centralisée et automatisée des circuits
Toetatud paakide tüübid	Sondes de niveau de réservoir standard (0-5V, 10-180 Ohms, 240-33 Ohms)
Vendor	CZONE
Traadivõrk	NMEA 2000

Detailed description

CZone SI signaaliliides (tähis 80-911-0013-00) on oluline komponent CZone digitaalse juhtimise ja jälgimise süsteemis, mis võimaldab ühendada väliseid andureid ja lüliteid. See on loodud laiendamaks NMEA 2000 võrgu võimalusi, võimaldades tsentraliseeritud ja automatiseeritud juhtimist erinevate sisendite põhjal.

Ühenduvus ja sisendite mitmekesisus

See moodul on varustatud 6 konfigureeritava sisendiga, mis võimaldavad erinevaid mere rakendusi. See aktsepteerib traditsiooniliste lülitite signaale (negatiivne, avatud ahel, 0–35 V DC) väljundite juhtimiseks ning häire aktiveerijaid, näiteks kõrge veetaseme lülitit. Liides toetab ka tööstusstandardite järgi töötavaid paakide taseandureid (0–5 V, 10–180 Ω, 240–33 Ω) ning üldisi voltiilseid või takistuslikke signaale. Sisendite spetsiifilised vahemikud on 0–1000 Ω takistuslike signaalide jaoks ning 0–34 V DC pinge jaoks. Igal sisendil on oleku indikaator LED-i näiduga, mis lihtsustab jälgimist. See mitmekesisus eristab seda lihtsamatest sisend-väljund moodulitest, mis toetavad ainult ühte signaali tüüpi, ning teeb sellest andmete agregatsiooni lahenduse CZone süsteemis.

Integratsioon ja tehnilised andmed

CZone SI signaaliliides integreerub NMEA 2000 võrgustikku, võimaldades standardiseeritud andmete edastamist, nagu vedeliku-, temperatuuri- ja rõhuandmed multifunktsionaalsetele ekraanidele ning teistele ühilduvate seadmetele. Mooduli mõõtmed on 100 × 156 × 42 mm ja kaal 281 g. IPX5 kaitse ajutise veekindluse osas teeb selle sobivaks merekeskkondadeks. Moodul vastab elektromagnetilise ühilduvuse nõuetele (EMC) vastavalt IEC EN 60945, IEC EN 61000, FCC Class B, ISO 7637-1 ja ISO 7637-2, tagades elektromagnetiliste häirete vastupidavuse. See täiendab ideaalselt olemasolevaid CZone süsteeme, näiteks Touch 10 ekraane või kombinatsioonimooduleid, toimides sillana mitte-NMEA 2000 andurite jaoks.

Documentation

Type	Nom
	_tchdat_bep1_pdf.pdf
	czone_signal_interface_user_installation_manual_v2.pdf

Expert review

Pol CONIN

Digitaalarenduse vastutaja

« CZone SI interface: the analog-to-digital bridge for your NMEA 2000 network »

The CZone SI signal interface is a strategic component for any CZone installation seeking to integrate analog or passive sensors and switches into a NMEA 2000 environment. Its primary role is to digitize these signals for use by the CZone system, enabling centralized automation and monitoring.

This module is particularly relevant for retrofits or custom installations where existing equipment (tank float switches, bilge pump switches, hatch position sensors, manual navigation lights) must be connected to the digital network. It eliminates the complexity and cumbersome wiring of traditional analog systems by providing a single interface for 6 inputs. Integrating this interface greatly simplifies wiring topology and alarm management.

It is essential to plan the module’s location to optimize sensor cable lengths and ensure the NMEA 2000 network is properly sized to accommodate it. While the IPX5 rating provides good splash resistance, it is recommended to install the module in a dry compartment or under a deck to maximize its lifespan. This module is a wise choice for integrators looking to offer their clients a smart, unified solution for onboard equipment management, fully leveraging the capabilities of the CZone system.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

CZone SI signaaliliides

287,82€

287,82€ ~~362,16€~~

Complete your installation with

Complementary equipment

CZone

C-Zone puutetundliku ekraani 10" 2. põlvkonna kitt

Ref : 80-911-0216-00

3.739,76€

3.739,76€ ~~3.990,85€~~

CZone

7" puutetundliku ekraani kitt

Ref : 80-911-0200-00

1.363,96€

1.363,96€ ~~1.537,37€~~

CZone

6-voolise veekindel klaviatuur (maht)

Ref : 80-911-0162-00

326,08€

326,08€ ~~387,48€~~

CZone

Veekindel 6-klahviline klaviatuur (portreeasend)

Ref : 80-911-0163-00

290,62€

290,62€ ~~387,48€~~

CZone

MasterBus WiFi ühenduspesa

Ref : 80-911-0095-00

81,13€

81,13€ ~~106,68€~~

Kit de télécommande sans fil pour interrupteurs de batterie de taille 701-MD et 720

CZone

Traadita juhtpult komplekt akukaitselülitite mudelitele 701-MD ja 720

Ref : 80-911-0045-00

167,06€

167,06€ ~~198,24€~~

Frequently asked questions

Need help? Contact us

What is the CZone SI signal interface?

The CZone SI signal interface (reference 80-911-0013-00) is a central module designed to integrate external sensors and switches into a CZone digital switching and monitoring system. It extends the capabilities of the NMEA 2000 network for centralized and automated circuit management based on various inputs.

How many configurable inputs does the CZone SI interface have?

The CZone SI signal interface is equipped with 6 configurable inputs, providing great flexibility for various marine applications.

What types of signals can the CZone SI signal interface accept?

This module is versatile and can accept several types of signals:

Traditional switch signals (negative, open circuit, 0-35V DC) for output control.Water level alarms, such as a high-level float switch.Standard industry tank level sensors (0-5V, 10-180 Ohms, 240-33 Ohms).General voltage or resistive signals.

What are the specific input ranges for resistive and voltage signals?

The specific input ranges for the CZone SI interface are:

0 to 1000 Ohms for resistive signals. 0 to 34 V DC for voltage signals.

Does the CZone SI interface have status indicators for its inputs?

Yes, each input on the CZone SI signal interface is equipped with an LED status indicator, making monitoring and diagnostics easier.

What are the physical dimensions of the CZone SI signal interface?

The dimensions of the CZone SI signal interface are 100 x 156 x 42 mm.

What is the weight of the CZone SI signal interface?

The weight of the CZone SI signal interface is 281 grams (0.281 kg).

What is the water protection rating of the CZone SI interface?

The CZone SI signal interface has temporary immersion protection with an IPX5 waterproof rating.

How does the CZone SI interface connect to the boat's system?

The CZone SI signal interface integrates with the NMEA 2000 network, enabling standardized communication with other compatible devices in the boat's system.

Is the CZone SI signal interface compatible with multifunction displays (MFD)?

Yes, via its integration into the NMEA 2000 network, the CZone SI interface enables standardized data transmission to multifunction displays (MFD) and other compatible devices.

Which types of tank level sensors are supported by the CZone SI interface?

The CZone SI interface supports standard industry tank level sensors with signal ranges of 0-5V, 10-180 Ohms, and 240-33 Ohms.

Can the CZone SI interface be used to trigger alarms?

Yes, the CZone SI interface can be configured to accept alarm triggers, such as those from a high water level switch, enabling proactive monitoring.

What is the role of the CZone SI signal interface in a larger CZone system?

In a CZone system, the SI interface acts as a data aggregation solution. It collects information from various sensors and switches, then integrates it into the NMEA 2000 network for centralized management and monitoring.

What types of data does the CZone SI interface transmit on the NMEA 2000 network?

The CZone SI interface transmits standardized data such as fluid levels, temperature, and pressure information over the NMEA 2000 network.

Is the installation of the CZone SI signal interface complex?

The CZone SI signal interface is designed for seamless integration into an existing CZone system via the NMEA 2000 network. For optimal installation and configuration of inputs, it is recommended to follow the manufacturer's detailed instructions or consult a professional.

What is the part number (SKU) for this product?

The part number (SKU) for the CZone SI signal interface is 80-911-0013-00.

Is the CZone SI interface designed specifically for a marine environment?

Yes, as a CZone product, this interface is specifically designed for marine applications, as evidenced by its IPX5 protection rating and its ability to integrate with NMEA 2000 networks.