Système LiveScope™ Plus avec sonde GLS 10™ et LVS34 - Garmin

Système LiveScope™ Plus avec sonde GLS 10™ et LVS34 - visuel officiel Garmin 2

Système LiveScope™ Plus avec sonde GLS 10™ et LVS34 - visuel officiel Garmin 3

Système LiveScope™ Plus avec sonde GLS 10™ et LVS34 - visuel officiel Garmin 4

Free pickup point for orders over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

via our network of certified installers

Find an installer

Support service

Choose additional installation support

Säästad 15%

Garmin

010-02706-00

Garmin LiveScope™ Plus süsteem koos GLS 10™ sonari ja LVS34 sondiga

Le système Garmin LiveScope™ Plus avec sonde GLS 10™ et LVS34 offre une visualisation sonar en temps réel avancée. Ce système complet est conçu pour améliorer la connaissance situationnelle sous-marine. Le kit inclut le module GLS 10™, la sonde LVS34, le kit de montage sur tableau arrière et la visserie nécessaire.

Konfiguratsioon: Complete system

Complete system LVS34 depth sounder only LVS34-IF Depth Sounder

Public priceGet pro pricing

1.863,56€

1.863,56€ ~~2.199,00€~~

Käibemaksuga Tarne arvutatakse makse tegemise ajal.

Laosolekus

Free pickup point for orders over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

via our network of certified installers

Find an installer

Support service

Choose additional installation support

Technical specifications

Toetatud sonari tehnoloogiad	LiveScope
Sonari sagedused	530-1170 kHz (LiveScope) ; 800 kHz (DownScan) ; 455 kHz (SideScan) ; 200 kHz (Sonar traditionnel)
Ühilduvad kuvarid	Tout afficheur Garmin compatible avec le réseau Garmin (ex: ECHOMAP Ultra, GPSMAP) et le module GLS 10
Võrguühilduvus	NMEA 2000,Garmin Marine Network
Traadivõrk	Garmin Marine Network,NMEA 2000
Traadita ühenduvus	Aucune
Montaažitüüp	Arrière (transom)
Kalanduse tüüp	Lac, Rivière, Mer
Sisseehitatud GPS-antenn	Non
Sisseehitatud kiirusandur	Non
Pakendi sisu	Module sondeur GLS 10, Sonde LVS34, Kit de montage arrière, Câble d'alimentation, Câble réseau, Documentation
Väljaandmise aasta	2022.0

Detailed description

Garmin LiveScope™ Plus süsteem koos GLS 10™ sonari ja LVS34 sondiga on uusimate tehnoloogiate pakkumine reaalajas sonarivaate jaoks. Koosneb GLS 10™ sonarimoodulist ja LVS34 sondist, see komplekt on loodud pakkuma dünaamilist ja vahetut olukorateadlikkust vee all. Erinevalt traditsioonilistest sonarisüsteemidest, mis võivad pakkuda staatilisi vaateid või viivitatud skaneeringuid, annab LiveScope Plus koheva perspektiivi, mis on oluline navigatsiooniks ja objektide või struktuuride avastamiseks. On kohustuslik uuendada Garmini kaarditrajektori tarkvara seadme paigaldamisel, et tagada ühilduvus ja optimaalsed toimingud.

Paigaldus ja kasutamisel arvestatavad asjaolud

LiveScope™ Plus LVS34 tahapoole paigalduskomplekti paigaldamine nõuab erilist tähelepanu, et tagada töökindlus ja sooritusvõime. Protsess nõuab spetsiifiliste tööriistade kasutamist, nagu näiteks puur, 17 mm võtmed (sh dümomõõduline võti 20 N-m või 15 lbf-ft jaoks), ristpea kruvikeeraja nr 2, maskimisklint ja merepits. Juhtmepilud tuleb puurida 4 mm (5/32 tolli) puuri abil 19 mm (7/10 tolli) sügavuseni, ning 20 mm kruvid merepitsiga kasutatakse toestiku kinnitamiseks. Juhtmed võib juhtida läbi 32 mm (1 1/4 tolli) läbipääsukest või tahapoole taha, jälgides, et vältida elektriliste häirete allikaid.

Paigaldamisel on olulised järgmised asjaolud: sondi ei tohi paigutada propelleri teele, turbulentsi või õhumullide tekitavate elementide taha ning see peaks olema võimalikult lähedal paadi keskjoonele. Paatidel väljaspool mootoriga (väljaspoolmootorid või sterndriivid), on soovitatav paigutada sond propelleri allaheitva serva poole (tavaliselt parempoolne). On oluline märkida, et sondi toimivus on piiratud kiirustel üle 19 km/h (12 mi/h), kus põhjaandmed ja sügavusinfo võivad olla vähendatud. Lisaks võib kõrgetel kiirustel sondi tõmme mõjutada paadi kurssi pidamise võimet, potentsiaalselt vähendada maksimaalset kiirust või põhjustada triivi. Garmin rõhutab, et sonarinfo on mõeldud ainult olukorateadlikkuse jaoks ning ei pruugi ära hoida kõiki karidele sõitmisi või kokkupõrkeid. Tahapoole paigalduskomplekt pole mõeldud purunemiseks kokkupõrkel, ning veealuste objektidega kokkupõrgetest põhjustatud kahjud ei kuulu garantii alla.

Asukoht Garmini tootevalikus

LiveScope™ Plus koos GLS 10™ ja LVS34 sondiga kuulub Garmini reaalajas sonarite süsteemide edumeelsete pakkumiste hulka. See on suunatud nõudlikele kasutajatele, kes vajavad vahetut ja detailset veealust vaadet, kas spordikalastuse või täpse navigatsiooni jaoks. See süsteem on oluline osa Garmini ühilduvate kaarditrajektoride jaoks, pakkudes sujuvat integratsiooni ja paremaid kuvamisvõimalusi täielikuks veekeskkonna sissevaatamiseks. Soovitatav on paigalduse teostada kvalifitseeritud professionaali poolt, et optimeerida seadme toimivust ja vastupidavust. Paigaldamise juhendvideod on saadaval aadressil garmin.com/videos/lvs34 kasutajatele abi pakkumiseks.

Documentation

Type	Nom
	Notice d'installation - Instructions d'installation du kit de montage tableau arrière LiveScope Plus LVS34 (EN)

Expert review

Pol CONIN

Digital Manager

« Technical analysis: Garmin LiveScope Plus LVS34 system »

The Garmin LiveScope™ Plus system, integrating the GLS 10™ module and the LVS34 transducer, represents a significant advancement for real-time underwater situational awareness. As an engineer and installer, I emphasize the critical importance of installation in strict compliance with the provided guidelines. The transom-mounting kit, while robust for normal use, is not designed to withstand impacts, and any damage caused by a underwater collision is not covered by the warranty. It is therefore crucial to select a mounting location that minimizes shock risks while optimizing transducer performance.

The mechanical installation requires precision: pilot hole drilling (4 mm) and through-hull fitting (32 mm if required) must be executed carefully. Applying marine sealant and adhering to the 20 N-m (15 lbf-ft) torque specification for the support bolts are essential for hull integrity and transducer stability. Cable routing must strictly avoid electrical interference sources to ensure signal clarity. Additionally, a chartplotter software update from Garmin is mandatory to ensure compatibility and fully leverage the system's capabilities.

Operationally, it is important to note that the LVS34 transducer performance degrades above 19 km/h (12 mi/h), and drag can affect the boat's course-keeping. These limitations must be considered during high-speed navigation. Finally, while LiveScope Plus provides exceptional visualization, it is essential to remember that sonar information is provided solely as situational awareness aid and must not replace the operator's vigilance to avoid collisions or groundings.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Garmin LiveScope™ Plus süsteem koos GLS 10™ sonari ja LVS34 sondiga

1.863,56€

1.863,56€ ~~2.199,00€~~

Complete your installation with

Complementary equipment

Garmin

GPSMAP® 8410 – 10-tolline navigatsiooniekraan maailmakaardiga

Ref : 010-02091-00

2.237,30€

2.237,30€ ~~2.939,00€~~

Garmin

GPSMAP® 8416xsv – GPS-sondri 16" ühendusseade

Ref : 010-02093-02

5.253,08€

5.253,08€ ~~6.829,00€~~

Garmin

GPSMAP® 9010xsv – 10-tolline GPS-süvendi ühendusseade kõrgtasemeline

Ref : 010-03175-02

3.509,62€

3.509,62€ ~~3.999,98€~~

Garmin

GPSMAP® 9013xsv – GPS-kombinaator 13" kõrge kvaliteediga

Ref : 010-03176-02

4.625,58€

4.625,58€ ~~5.499,98€~~

Garmin

GPSMAP® 9017xsv – 17" kõrgklassi GPS-süvamõõtja-kombineeritud seade

Ref : 010-03177-02

6.796,55€

6.796,55€ ~~8.099,99€~~

Garmin

Reactor™ 40 automaatjuhtimissüsteem hüdraulilise süsteemiga GHC™ 50 instrumentiga

Ref : 010-02794-00

1.647,23€

1.647,23€ ~~2.079,00€~~

Garmin

GHC™ 50 juhtimisseade automaatjuhtimise süsteemile

Ref : 010-02731-00

644,08€

644,08€ ~~849,00€~~

Garmin

AIS-transponder 800 saatja-vastuvõtja

Ref : 010-02087-00

986,21€

986,21€ ~~1.300,00€~~

Garmin

VHF 115i

Ref : 010-02096-01

392,72€

392,72€ ~~479,00€~~

Frequently asked questions

Need help? Contact us

What is the Garmin LiveScope™ Plus system with GLS 10™ transducer and LVS34?

The Garmin LiveScope™ Plus system is a cutting-edge real-time sonar visualization solution. It consists of the GLS 10™ sonar module and the LVS34 transducer. This setup is designed to provide dynamic and instantaneous situational awareness underwater, offering an immediate perspective for navigation and detection of objects or structures, unlike traditional sonar systems that may display static views or delayed scans.

What are the main components included in the LiveScope™ Plus system?

The LiveScope™ Plus system comes with two main components:

The GLS 10™ sonar module, which is the sonar processing unit.The LVS34 probe, which is the LiveScope™ Plus transducer.These two elements work together to provide real-time sonar imagery.

Which tools are required to install the LiveScope™ Plus LVS34 transom-mount kit?

To install the LiveScope™ Plus LVS34 transom-mount kit, you will need the following tools:

A drill and drill bits.A 17 mm (5/8 in) wrench.A torque wrench with a 17 mm (5/8 in) socket.Masking tape.A #2 Phillips screwdriver.Marine sealant.

Are there any specific considerations for mounting the LiveScope™ Plus transducer on the transom?

Yes, several considerations are important for optimal installation:

The transducer must not be installed in the propeller wash path. For boats with outboard motors and sterndrives, it is recommended to install the transducer on the side of the propeller’s downwash, typically starboard side.Choose a location where the transducer will not be subjected to vibration during launching, towing, or storage.Avoid installing the transducer behind frames, struts, fittings, water outlets, through-hull transducers, or anything that could create air bubbles or cause turbulent water, as this can interfere with the sonar beam.Install the transducer as close as possible to the boat’s centerline.On twin-propulsion boats, install the transducer between the propellers if possible.

How to adjust and secure the LiveScope™ Plus transducer after mounting it on the transom?

After connecting the transducer to the mount and the mount to the transom, you must adjust its angle and depth:

Adjust the transducer angle so that the element is parallel to the waterline.Using a 5 mm Allen key, tighten the screw that secures the transducer to the mount.Adjust the height of the transducer mount on the transom so that the transducer is submerged when the boat is in the water.Using a size #2 Phillips screwdriver, tighten the five screws that secure the mount to the transom.Test the transducer angle and depth and make any necessary adjustments.

Is it necessary to update the software of my Garmin chartplotter when installing the LiveScope™ Plus system?

Yes, it is imperative to update the software of your Garmin chartplotter when installing the LiveScope™ Plus system. This update ensures compatibility and optimal performance of the device.

Are damages to the LiveScope™ Plus transducer caused by a submerged impact covered by the warranty?

No, damages to the transducer, mount, or boat caused by an impact with a submerged object are not covered by the warranty. The transom mount is not designed to detach upon impact, and striking a submerged object can damage the equipment.