Sonde Garmin GT52HW-TM en plastique, pour montage sur tableau arrière ou moteur électrique, CHIRP large et haute (150-240 kHz, 250 W)/CHIRP ClearVü et CHIRP SideVü (455/800 kHz, 500 W, 12 broches) - Garmin

Sonde GT52HW-TM - tableau arrière CHIRP/ClearVü/SideVü - visuel officiel Garmin 2

Sonde GT52HW-TM - tableau arrière CHIRP/ClearVü/SideVü - visuel officiel Garmin 3

Sonde GT52HW-TM - tableau arrière CHIRP/ClearVü/SideVü - visuel officiel Garmin 4

Free pickup point for orders over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

via our network of certified installers

Find an installer

Support service

Choose additional installation support

Säästad 21%

Garmin

010-12405-00

Sondi GT52HW-TM – tagurpidi paneel CHIRP/ClearVü/SideVü

La sonde Garmin GT52HW-TM est un transducteur 12 broches multifréquence CHIRP large et haute (150-240 kHz, 250 W), intégrant également les technologies CHIRP ClearVü et SideVü (455/800 kHz, 350 W). Idéale pour les pêcheurs en eau douce, elle offre une imagerie détaillée des poissons et des structures sous-marines. Ce modèle est conçu pour un montage flexible sur tableau arrière ou moteur électrique. Inclus : sonde GT52HW-TM, support tableau arrière, support moteur électrique, matériel de montage et documentation.

Public priceGet pro pricing

289,93€

289,93€ ~~369,00€~~

Käibemaksuga Tarne arvutatakse makse tegemise ajal.

Laosolekus

Free pickup point for orders over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

via our network of certified installers

Find an installer

Support service

Choose additional installation support

Technical specifications

Toetatud sonari tehnoloogiad	CHIRP traditionnel,ClearVü,SideVü
Töötav pinge	12 V
Sonari sagedused	150-240, 455, 800
Tippmõõt	500.0
Maksimaalne süvisandmete lugemissügavus	244.0
Sondi materjal	Plastique
Sonariühenduse tüüp	12 broches
Kaabli pikkus	6.1
Sisseehitatud temperatuuriandur	Oui
Ühilduvad kuvarid	Garmin EchoMap, GPSMAP, Striker
IP-tunnus	IPX7
Võrguühilduvus	Propriétaire Garmin (12 broches)
Traadivõrk	Propriétaire Garmin (12 broches)
Traadita ühenduvus	Non
Montaažitüüp	Tableau arrière, moteur électrique
Sertifikaadid	CE
Kiire kaetavusnurk	24°-16° (Traditionnel), 2.0°x50° (ClearVü/SideVü 455 kHz), 1.0°x30° (ClearVü/SideVü 800 kHz)
CHIRP-i kõrgsagedus	455/800
CHIRP-i madalsagedus	150-240
Ühilduv mudel	Garmin EchoMap, GPSMAP, Striker
Kalanduse tüüp	lac, rivière
Hull Material Compatibility	Fibre de verre,Aluminium,Bois,Acier
Installation Expertise Required	Installateur marin qualifié
Nõutavad paigaldustööriistad	Tournevis Phillips,Perceuse,Forets,Ruban de masquage,Mastic marin,Ruban étanche
Sisseehitatud kiirusandur	Non
Sisalduvad kinnitusvahendid	Oui
Mounting Location Avoidance	Près de l'hélice, derrière les virures, les renforts, les raccords, les prises ou sorties d'eau, ou toute source de turbulence/bulles d'air
Montaažitemplaat kaasas	Oui
Optimal Speed Mph	34
Väljaandmise aasta	2017.0
Transducer Operation Condition	Nécessite un contact constant avec l'eau
Vessel Type Restriction	Voilier
Vulnerability Type	Dommages externes par remorques ou obstructions sous-marines

Detailed description

Garmin GT52HW-TM sondi on veekogude püügiks mõeldud 12 kontaktiga universaalne transdutseer, mis pakub traditsioonilist CHIRP sonarit, ClearVü ja SideVü võimalusi. See on integreeritud lahendus veealuse uurimiseks ja kalade avastamiseks, mis eristub ainult ühe sagedusega mudelitest info rikkuse poolest. GT52HW-TM on ühilduv nii tagurpidi paneeli kui ka elektrimootori paigaldusega, pakkudes paindlikkust erinevate väikeste ja keskmise suurusega veesõidukite jaoks.

Sonari jõudluse üksikasjad

Garmin GT52HW-TM sondi südameks on mitmesugused CHIRP sagedused. Traditsiooniline sonar kasutab laia kõrgsagedusvahemikku 150–240 kHz võimsusega 250 W, võimaldades selgetid tagasipõrkeid ja sihtmärkide eraldamist kuni 244 meetri (800 jala) sügavuseni. Struktuuride kujutamiseks kasutavad ClearVü ja SideVü tehnoloogiad 455 kHz (425–485 kHz) ja 800 kHz (790–850 kHz) sagedusi, mõlemad 350 W võimsusega, pakkudes detailset vaadet põhjale ja külgstruktuuridele kuni 152 meetri (500 jala) sügavuseni. GT52HW-TM eristub nii Garmin GT20/GT22 seeria sondidest, mis pakuvad tihti kitsamaid sagedusvahemikke või vähem võimsust skaneerimiseks, tehes selle struktuuride ja kalade avastamiseks veekogudes efektiivsemaks.

Poliitlus ja ühilduvus

24°–16° traditsioonilise kiirega ja 2,0°x50° kuni 455 kHz ning 1,0°x30° kuni 800 kHz skaneerimiskiirega pakub Garmin GT52HW-TM-TM sondi teravaid pildikvaliteete ja täpset kalade struktuuride kujutamist. 6,1 meetri (20 jala) pikkune kaabel lihtsustab paigaldamist enamikul paatidel. Sondi on varustatud ka sügavuse ja temperatuuri anduritega, mis kinnitavad püüdjale olulisi andmeid. Ühilduvus 0°–70° tagurpidi paneeli nurkadega teeb selle sobivaks laia valiku veekogude jaoks. Võrreldes spetsialiseeritumate transdutseeridega, nagu läbiviilutatavad sondid suurematel purjelaevadel või kõrgsagedusliku CHIRP-iga üksused sügava mere püügiks, pakub GT52HW-TM täieliku ja kättesaadava lahenduse ranniku- ja järvepüügiks.

Documentation

Type	Nom
	Gabarit de montage - Gabarit de montage pour sonde Garmin GT52HW-TM
	Manuel utilisateur - Guide de placement des sondes Garmin
	Notice d'installation - Sonde GT52HW-TM : Installation tableau arrière/moteur électrique

Expert review

Pol CONIN

Digitaalarenduse vastutaja

« Technical analysis of the Garmin GT52HW-TM transducer: CHIRP versatility for freshwater »

The Garmin GT52HW-TM transducer is an excellent choice for recreational boaters and freshwater anglers seeking an integrated and high-performance solution. Its main strength lies in combining three CHIRP sonar technologies: traditional wide and high-frequency beams for fish detection, and ClearVü/SideVü for detailed imaging of structures and the seabed. This versatility is particularly useful for identifying fish-holding areas and underwater relief changes.

In terms of installation, the GT52HW-TM is designed for transom or trolling motor mounting, making it accessible for DIY installation on most small boats, from dinghies to small rigid inflatables, without requiring complex hull drilling as with through-hull transducers. The trolling motor mounting flexibility is a notable advantage for trolling anglers or those using auxiliary motors, allowing precise orientation and consistent performance at low speeds. It is critical to ensure optimal positioning, away from turbulence generated by the propeller or other hull appendages, to guarantee maximum signal quality.

Compared to other Garmin transducers, the GT52HW-TM positions itself as a highly effective mid-range solution for freshwater use. It offers a clear imaging detail advantage over traditional dual-frequency transducers (e.g., 50/200 kHz) and better coverage than ClearVü-only transducers. However, it is not designed for extreme depths or offshore applications that would require higher-power CHIRP transducers and different frequencies (e.g., medium or low CHIRP). For freshwater or shallow coastal use, its performance-to-cost ratio is particularly relevant, providing comprehensive visibility without the premium cost of solutions aimed at offshore or high-end applications like Panoptix LiveScope, which target more specific real-time visualization uses.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Sondi GT52HW-TM – tagurpidi paneel CHIRP/ClearVü/SideVü

289,93€

289,93€ ~~369,00€~~

Complete your installation with

Complementary equipment

Garmin

GPSMAP® 723xsv – 7-tolline GPS-süvamõõtja kombinatsiooniseade maailmakaardiga

Ref : 010-02365-02

1.010,88€

1.010,88€ ~~1.259,00€~~

Garmin

GPSMAP® 923xsv – GPS- ja kaardisüsteemi kombinatsioon 9" ekraaniga, maailmakaardiga

Ref : 010-02366-02

1.429,48€

1.429,48€ ~~1.789,00€~~

Garmin

GPSMAP® 1223xsv – GPS- ja kaardisüvendi 12" ühendatud seade maailmakaardiga

Ref : 010-02367-02

2.472,35€

2.472,35€ ~~3.259,00€~~

Garmin

GPSMAP® 8410xsv – GPS- ja kaarditraceerija-koondseade 10"

Ref : 010-02091-02

2.447,99€

2.447,99€ ~~3.149,00€~~

Garmin

GPSMAP® 8412xsv – GPS- ja kaardisüvendi ühendusseade 12"

Ref : 010-02092-02

3.708,70€

3.708,70€ ~~4.619,00€~~

Garmin

GPSMAP® 8416xsv – GPS-sondri 16" ühendusseade

Ref : 010-02093-02

5.253,08€

5.253,08€ ~~6.829,00€~~

Garmin

GPSMAP® 9010xsv – 10-tolline GPS-süvendi ühendusseade kõrgtasemeline

Ref : 010-03175-02

3.509,62€

3.509,62€ ~~3.999,98€~~

Garmin

GPSMAP® 9013xsv – GPS-kombinaator 13" kõrge kvaliteediga

Ref : 010-03176-02

4.625,58€

4.625,58€ ~~5.499,98€~~

Garmin

GPSMAP® 9017xsv – 17" kõrgklassi GPS-süvamõõtja-kombineeritud seade

Ref : 010-03177-02

6.796,55€

6.796,55€ ~~8.099,99€~~

Garmin

ECHOMAP™ Plus 42cv

Ref : 010-01884-00

307,50€

307,50€ ~~369,00€~~

Garmin

Garmin ECHOMAP™ Plus 42cv

Ref : 010-01884-01

397,75€

397,75€ ~~479,00€~~

Garmin

GPSMAP® 1022xsv – GPS-süvaveeturi kombinatsioon 10"

Ref : 010-01740-02

1.712,41€

1.712,41€ ~~2.099,00€~~

Frequently asked questions

Need help? Contact us

Which sonar technologies are integrated in the Garmin GT52HW-TM transducer?

The Garmin GT52HW-TM transducer integrates three main sonar technologies:

Traditional high and wide CHIRP sonar.CHIRP ClearVü sonar for detailed imaging of structures beneath the boat.CHIRP SideVü sonar for side imaging of structures and fish.

What are the operating frequencies of the traditional CHIRP sonar in this transducer?

The traditional CHIRP sonar in the GT52HW-TM transducer operates over a high and wide frequency range from 150 to 240 kHz.

What is the transmit power of the traditional CHIRP sonar?

The transmit power of the traditional CHIRP sonar is 250 W.

Which frequencies are used by the ClearVü and SideVü sonars?

The ClearVü and SideVü sonars use frequencies of 455 kHz (range 425-485 kHz) and 800 kHz (range 790-850 kHz).

What is the transmit power for ClearVü and SideVü sonars?

Each technology, ClearVü and SideVü, has a transmit power of 350 W.

What is the maximum detection depth for the traditional CHIRP sonar?

The traditional CHIRP sonar can detect targets down to a maximum depth of 244 meters (800 feet).

What is the maximum depth for ClearVü and SideVü sonars to operate?

The ClearVü and SideVü sonars can provide detailed imaging down to a depth of 152 meters (500 feet).

Is this transducer specifically designed for a type of water (fresh or salt)?

Yes, the Garmin GT52HW-TM transducer is primarily designed for freshwater anglers.

What is the connector type of the GT52HW-TM depth sounder?

The depth sounder is equipped with a 12-pin connector.

What material is the Garmin GT52HW-TM transducer made of?

The transducer is made of plastic, suitable for transom or electric motor mounting.

Which Garmin devices is the GT52HW-TM transducer compatible with?

The transducer is compatible with Garmin chartplotters or fishfinders that have a 12-pin connector and support traditional CHIRP, ClearVü, and SideVü sonar technologies.

What are the possible mounting methods for this transducer?

The transducer can be mounted in two main ways: on the boat's transom or on an electric motor.

What are the important considerations for positioning the depth sounder on the transom?

For optimal operation, the transducer must be installed:

Parallel to the waterline.

At least 38 cm (15 inches) from the propeller.

Away from turbulence (strakes, water intakes, etc.).

On the starboard side if the propeller rotates clockwise, or port side if it rotates counterclockwise.

How to route the depth sounder cable to avoid interference?

The depth sounder cable must be routed away from ignition wires, batteries, electric motor cables, and high-energy wires (radar, audio amplifier, autopilot pump) to minimize electromagnetic interference.

Should a template be used for mounting on the transom?

Yes, it is strongly recommended to use the mounting template provided in the product box to ensure precise drilling and avoid incorrect cuts.

Is it allowed to cut the depth sounder’s cable to ease installation or routing?

No, the depth sounder’s cable must not be cut, as this voids the product warranty.

How to mount the transducer on an electric motor?

The transducer is mounted to the electric motor body using hose clamps inserted into the support slots. The cable must be routed inside the support and secured with waterproof tape along the motor shaft.

What to do if the depth sounder generates too much spray after installation?

If the depth sounder produces excessive spray, it is recommended to recheck mounting considerations and adjust its position and depth to eliminate this phenomenon.