ELITE FS 9 sügavusmõõtur koos Active Imaging HD 3-ühes sondiga

The Lowrance ELITE FS 9 fishfinder features a 9-inch multi-touch, high-brightness screen. It delivers a high-definition resolution of 800 x 480 pixels with a brightness exceeding 1200 nits, ensuring excellent visibility even in bright sunlight.

Yes, the Lowrance ELITE FS 9 fishfinder is designed for demanding marine environments. It features IPx6 and IPx7 waterproof ratings, ensuring resistance to powerful water jets and temporary immersion.

The FishReveal technology combines CHIRP sonar and DownScan data on the same screen. This allows for easier and clearer identification of fish targets by overlaying the CHIRP fish arches onto the detailed DownScan images.

The ELITE FS 9 fishfinder can operate within a temperature range of -15°C to 55°C (5°F to 131°F). For storage, the range is -20°C to 60°C (4°F to 140°F).

To quickly save a waypoint, you can press the Waypoint button twice. A single press displays the 'New waypoint' dialog for customization.

Yes, to take a screenshot, simply press the 'Pages' button and the 'Power' button simultaneously on the device.

To clean the fishfinder housing, use warm water with a small amount of dish soap or mild detergent. Avoid using a jet or pressure washer to prevent damage to the unit.

The ELITE FS 9 fishfinder supports multiple sonar frequencies, depending on the configured transducer model. Available frequencies include 455 kHz, 800 kHz, 50 kHz, 200 kHz, as well as CHIRP frequencies of 700 kHz, 1075 kHz, and 1200 kHz.

Yes, the ELITE FS 9 fishfinder integrates a GPS receiver with a 10Hz refresh rate, compatible with WAAS, MSAS, EGNOS and GLONASS systems for precise positioning.

The device allows you to create and manage waypoints, routes, and tracks. You can start navigating a route directly from the chart window and use the +/- buttons to zoom in/out or adjust the scale.

Yes, the ELITE FS 9 fishfinder has a microSD card reader that can be used to store chartplotter data. It supports cards up to 32 GB.

Yes, the ELITE FS 9 fishfinder is compatible with ActiveTarget and ActiveTarget 2 real-time fishfinders. These modules are sold separately and enable dynamic observation of fish and underwater structures.

The ELITE FS 9 fishfinder offers the following network connectivity options:

One NMEA 2000 port (Micro-C connector).One Ethernet port (5-pin connector, 100Base-T).Wi-Fi connectivity (802.11b/g/n, in access point and client modes).Bluetooth 4.0 connectivity with Bluetooth® Classic support.

Yes, to access the detailed views of Active Imaging HD with advanced CHIRP frequencies (700 kHz and 1200 kHz for DownScan, 455 kHz and 1075 kHz for SideScan), an additional S3100 module is required. Without this module, the standard Active Imaging transducer uses frequencies of 455 kHz and 800 kHz.

Yes, the ELITE FS 9 fishfinder supports integration with autopilot systems, including bow thruster autopilots (such as Recon) and outboard autopilots. It is important to follow usage precautions when operating an autopilot.

Yes, you can download the 'Lowrance Fish and Navigation' app from the Apple® App Store® and Google Play® Store. Once connected, the app allows you to register your display unit and synchronize your data.

The ELITE FS 9 fishfinder is designed to be powered by a 12 V DC supply. The supported minimum and maximum voltage range is 10.8 V DC to 17 V DC.

A 3 A fuse or circuit breaker must be installed on the positive power supply line of the device to ensure adequate protection.

The maximum power consumption of the ELITE FS 9 fishfinder (9-inch model) is 28 W, which corresponds to a current of 2 A at 13.8 V DC.

The Lowrance ELITE FS 9 fishfinder is supplied with the Active Imaging HD 3-in-1 transducer and integrates several advanced technologies for fish detection and underwater imaging:

Imaging technologies: It supports Lowrance CHIRP, SideScan, and DownScan Imaging technologies.Frequencies Active Imaging HD (with additional S3100 module): To access the detailed views of Active Imaging HD, an additional S3100 module is required (sold separately). With this module, the frequencies are:DownScan: CHIRP at 700 kHz and 1200 kHzSideScan: 455 kHz and 1075 kHzFrequencies Active Imaging standard (without S3100 module): If the S3100 module is not used, the Active Imaging transducer operates in standard mode with frequencies of 455 kHz and 800 kHz.FishReveal: This technology combines CHIRP and DownScan data on the same screen to simplify target identification.Compatibility: The unit is also compatible with ActiveTarget and ActiveTarget 2 real-time fishfinders (sold separately).