HDS-9 PRO kaardilugeja ilma sondita

The HDS-9 PRO fishfinder features a 9-inch screen with a resolution of 1280 x 720 pixels. It is a multi-touch touchscreen.

Yes, the HDS-9 PRO display is designed for excellent readability even in full sunlight. It features a brightness exceeding 1200 nits and wide viewing angles of 80° in all directions (up, down, left, right).

No, this version of the Lowrance HDS-9 PRO, with part number 000-15997-001, is sold without a transducer. This allows you to select the transducer best suited to your fishing type and existing installation.

The HDS-9 PRO is compatible with a wide range of fishfinder technologies, including:

CHIRP low, medium, and high-frequency sounders up to 1 kW.
DownScan (455/800 kHz or CHIRP 700/1200 kHz).
SideScan (455/800 kHz or CHIRP 455/1075 kHz).
Real-time fishfinder systems such as Lowrance ActiveTarget.

The HDS-9 PRO requires a 12 V DC power supply. The accepted voltage range is 10.8 V to 18 V DC.

A 3 A fuse is recommended on the positive power line to protect the unit.

The unit has two dedicated sonar ports (9-pin connectors), allowing connection of multiple sounders or advanced fishfinder modules.

Yes, the HDS-9 PRO is equipped with an NMEA 2000 port (Micro-C connector) to connect to your boat's network and share data with other compatible devices (engine, sensors, etc.).

The HDS-9 PRO fishfinder has a waterproof rating of IPX6 and IPX7, protecting it against powerful water jets and temporary immersion.

Yes, the HDS-9 PRO is equipped with two Ethernet ports that allow it to connect to other multifunction displays, sounder modules, radars, and other compatible devices to share information and functionality.

Yes, it is possible to connect an analog video source. The device has a video input port via the power cable. Note that an adapter cable, sold separately, is required for this connection.

The HDS-9 PRO has a maximum power consumption of 40 W, which corresponds to a current draw of 2.9 A at 13.8 V DC.

The HDS-9 PRO is designed to operate within a temperature range of -15°C to 55°C (5°F to 131°F).

Yes, the HDS-9 PRO features a hybrid interface. It includes a multi-touch display for intuitive use and a full physical keypad for precise, reliable control, even in rough seas or when wearing gloves.

The weight of the HDS-9 PRO screen alone is 1.39 kg (3.06 lb).

Yes, you can connect a compatible Lowrance radar directly to one of the two Ethernet ports on the HDS-9 PRO to display radar data on the screen.

The HDS-9 PRO is compatible with major marine charting systems, including C-MAP (DISCOVER, REVEAL) and Navionics charts. You can use charts stored on a microSD card.

To create an MOB (Man Overboard) waypoint in an emergency, simply press the Zoom in (+) and Zoom out (-) buttons on the device simultaneously.

Yes, the HDS-9 PRO is equipped with a 9-inch multi-touch display offering excellent readability in full sunlight thanks to its high brightness exceeding 1200 nits.

It features a resolution of 1280 x 720 pixels and wide viewing angles (80° in all directions), allowing you to view navigation and fishing data easily from any position on the boat.

As this model is sold without a transducer, it offers great flexibility to build your own network. It includes two 1 kW sonar ports and supports:

Traditional CHIRP fishfinder (low, medium and high frequency).High-resolution imaging technologies SideScan and DownScan.Advanced real-time detection systems such as Lowrance ActiveTarget and Ghost 360.

The HDS-9 PRO fishfinder operates on a 12 V DC electrical system (accepted voltage range: 10.8 to 18 V DC). Its maximum power consumption is 40 W (approximately 2.9 A at 13.8 V DC).

To ensure a safe installation and protect your device, it is recommended to install a 3 A fuse or equivalent circuit breaker on the positive power line.