Sondilaev EAGLE 5" 50/200 HDI

The Lowrance EAGLE 5" fishfinder has a 5-inch screen with a resolution of 800 x 480 pixels. It offers 80° viewing angles in all directions (up, down, left, right) for optimal readability.

The Lowrance EAGLE 5" HDI fishfinder integrates Hybrid Dual Imaging (HDI) technology. This technology combines traditional sonar at 50/200 kHz frequencies with DownScan imaging, enabling clear detection of underwater structures and fish.

The depth sounder uses traditional frequencies of 50/200 kHz. For DownScan and SideScan imaging (if a compatible TripleShot transducer is used), it operates at 455 kHz and 800 kHz.

Yes, the Lowrance EAGLE 5" HDI fishfinder has an IPX7 waterproof rating. This means it is protected against temporary immersion in water.

The depth sounder is equipped with a microSD card reader. It supports cards with a maximum capacity of 32 GB, allowing for the integration of charts and the recording of sonar data (.sl2 files).

To clean the housing of your depth sounder, use warm water with a small amount of dish soap or mild detergent. It is important not to use a jet of water or a pressure washer.

The depth sounder is designed to operate within a temperature range of -15°C to 55°C (5°F to 131°F). For storage, the temperature range is -20°C to 60°C (4°F to 140°F).

The weight of the Lowrance EAGLE 5" fishfinder screen alone is 0.46 kg (1.01 lb).

Yes, the depth sounder can record sonar data. This data is saved as .sl2 files on a microSD card inserted into the card reader.

The depth sounder can display different types of alarms, each associated with a color to indicate its severity:

Red: Critical alarmOrange: Important alarmYellow: Standard alarmBlue: WarningGreen: Minor warning

A 3 A fuse is recommended to protect the fishfinder’s electrical installation.

The Lowrance EAGLE 5" fishfinder can be mounted in two main ways: flush-mounted on the dashboard or with a bracket (mounting on a support).

For dashboard mounting, a dashboard gasket kit (reference 000-16253-001) is available and can be used for optimal and watertight installation.

The fishfinder has a single sonar port compatible with Lowrance SplitShot and TripleShot transducers.

The microSD card reader on the depth sounder supports cards up to 32 GB.

Yes, the depth sounder can export user data such as waypoints and routes. Export formats include User Data version 6 and version 4 files, which contain information like route creation date and time.

Yes, this depth sounder can support the SideScan function if a compatible transducer, such as a TripleShot, is connected to the device's single sonar port. The frequencies used for SideScan are 455 kHz and 800 kHz.

The Lowrance EAGLE 5" fishfinder integrates Hybrid Dual Imaging (HDI) technology. This combines traditional sonar operating at 50/200 kHz frequencies for standard fish detection with DownScan imaging (455/800 kHz), providing a highly detailed, near-photographic view of underwater structures beneath the boat.

The depth sounder must be connected to a 12 V DC power supply (it tolerates a range from 10.8 to 18 V DC). Its maximum power consumption is very low, at only 3.48 W (290 mA). To effectively protect your device and your electrical installation, it is imperative to use a 3 A fuse.

This device is equipped with a microSD card reader. To ensure smooth reading and proper recording of waypoints, routes or navigation data, the maximum card capacity must not exceed 32 GB.