MacPlus alalüliti-laadija DC/DC 12/24-30 + CZone

The Mastervolt MacPlus DC/DC 12/24-30 + CZone is an intelligent DC/DC converter and battery charger. It is designed to convert an input DC voltage of 12V into a stabilized output DC voltage of 24V with a maximum output current of 30A. It can operate both as a three-stage battery charger and as a stabilized DC power supply, and it integrates MasterBus and CZone communication systems for advanced energy management.

The MacPlus DC/DC 12/24-30 serves two main functions:

It can act as a three-stage smart battery charger, optimizing battery charging. It can also serve as a stabilized DC power supply, providing a constant DC voltage for your equipment.

This specific model, the MacPlus DC/DC 12/24-30, is designed to accept an input voltage of 12V.

The MacPlus DC/DC 12/24-30 provides a stabilized output voltage of 24V with a maximum current of 30A.

The MacPlus is compatible with Mastervolt’s MasterBus networks, enabling centralized monitoring and configuration. Additionally, it is CZone-compatible, facilitating integration into modern digital switching systems for advanced automation and control.

The MacPlus is designed to charge lead-acid or lithium-ion batteries in permanent systems. It must not be used to charge dry-cell batteries.

The MacPlus must be mounted to avoid any obstruction of airflow through its ventilation openings. The device requires a minimum clearance of 10 cm (4 inches) on all sides to ensure adequate cooling and prevent overheating.

The MacPlus must NOT be installed in the following locations:

Directly above batteries due to corrosive sulfur emissions they may release.In areas with a risk of gas or dust explosions.In an unventilated space, as this could lead to overheating.

Yes, the MacPlus DC/DC 12/24-30 comes with a battery temperature probe, which is an essential accessory for optimizing battery charging and lifespan.

The Mastervolt MacPlus has an IP23 ingress protection rating. This means it is protected against solid objects larger than 12.5 mm and against rain falling up to 60° from the vertical. It should not be exposed to direct rain, snow, spray, excessive humidity, or condensation.

The MacPlus can operate within a temperature range of -20 to +60 °C. However, above 40 °C, it will undergo power derating to maintain performance and safety.

General installation steps for the MacPlus are as follows:

Mount the device on a flat and solid surface, ensuring proper ventilation requirements are met.Connect the MacPlus to the DC electrical systems using appropriately sized cables and fuses.Configure the MacPlus either via the DIP switches or via the MasterBus or CZone interfaces.

To add the MacPlus to an existing MasterBus network, you must:

Disconnect a MasterBus cable or Terminator from the nearest MasterBus device. Connect this cable or Terminator to the MacPlus. Connect a new MasterBus cable to the other MasterBus device, then link it to the MacPlus.

To integrate the MacPlus into an existing CZone network, follow these steps:

Disconnect the main backbone network at the nearest connection point and insert a T-connector. Reconnect the backbone network connections using the new T-connector. Connect the CZone/MB RJ45 spur cable to the black coupler of the T-connector, then connect it to the MacPlus.

Yes, in addition to its battery charger function, the MacPlus can be configured to operate as a stabilized DC power supply, providing a constant DC voltage to power various onboard equipment.

Yes, the MacPlus is designed to be used only in installations with a common negative ground.

Yes, it is mandatory to use appropriately sized fuses and cables for the MacPlus DC input and output connections. The installation manual provides a table of recommended wire sizes for each model to ensure the device's safety and optimal performance.

The LED indicator on the front panel of the MacPlus serves as a status indicator. It provides visual information about the device's operating mode or state.

Yes, the Mastervolt MacPlus is specifically designed and suited for marine applications, as well as for recreational vehicles and living spaces. It is robust and includes essential features for these environments, such as CZone and MasterBus compatibility.