MasterBus 25 m kaabel

It serves as the central link for your embedded energy management network. It handles both data transmission and power supply for MasterBus-compatible peripheral devices.

No, this is a multifunction cable. It is designed to transmit simultaneously:

Communication data for the network
The electrical power required by small peripheral devices

The system uses a daisy-chain architecture. Native MasterBus devices have two ports, allowing the cable to be connected from one device to the next in a straightforward manner.

Yes, it is possible. However, for integrating third-party devices or older generations that are not natively compatible, a specific interface will need to be added.

Yes. For installations requiring precise adjustments, especially when passing through narrow bulkheads, Mastervolt offers a DIY kit as an option. It allows cutting the cable and re-terminating the connectors.

This 25-meter length is particularly suited for main connections spanning large vessels or boats, linking distant equipment groups.

No. Unlike other marine protocols that require multiple components and branches, this cable is the only type of wiring you need to connect your MasterBus devices.

Yes, it meets the strictest environmental standards. It complies with the RoHS directive (EN 63000:2018 standard), ensuring the absence of hazardous substances such as lead or mercury.

This cable meets industrial standards and holds CE and UKCA certifications, ensuring compliance with European and British safety requirements.

No, MasterBus terminators are separate components. They are required to terminate both ends of your daisy-chain network but must be purchased separately.

To connect older-generation devices, you must insert a dedicated communication interface between the device and the MasterBus network. The cable will then plug into this interface.

The MasterBus cable only powers small peripheral network devices (such as displays or control panels). High-power devices, like inverters or chargers, require their own dedicated power wiring.

Passing the cable can be made easier by using the optional mounting kit. It allows you to run the bare cable through smaller holes in the bulkheads, then crimp the connector once the cable is in place.

Mastervolt native products come with two communication ports as standard. This allows for one incoming cable and one outgoing cable to continue the daisy chain.

Yes. The range offers many sizes. You will find short connection cables from 0.2m to 15m, as well as a full 100m reel for custom wiring.

Absolutely. Although it is very popular in sailing, this cable is also designed to significantly simplify mobile installations such as recreational vehicles, camper vans, or service vehicles.

No. The MasterBus network is designed so that power for small peripherals is carried directly over the same communication cable, which greatly simplifies the overall wiring diagram.

Yes, as it is specifically designed for marine and mobile installations, it is made with robust materials to withstand the demanding conditions at sea and ensure optimal reliability.

The cable uses standard RJ45 connectors, specifically adapted to the MasterBus protocol. They allow quick, secure, and tool-free connection to all compatible devices.