Cable adaptateur Raymarine A80559 sonde CPT-S/DVS vers Element HV

Free pickup point for orders over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

via our network of certified installers

Find an installer

Support service

Choose additional installation support

Säästad 7%

Raymarine

A80559

Adaptiivkaabel CPT-S/DVS-sondi (9 kontaktiga) ühendamiseks Element HV-ga (15 kontaktiga)

Le câble d'adaptation Raymarine A80559 permet de connecter une sonde CPT-S ou CPT-DVS (9-pin) aux écrans multifonctions Element HV (15-pin), assurant la compatibilité et la réutilisation de vos transducteurs existants. Il offre une solution économique pour les mises à niveau de systèmes de navigation. Le produit inclut uniquement le câble adaptateur.

Public priceGet pro pricing

99,65€

99,65€ ~~108,00€~~

Käibemaksuga Tarne arvutatakse makse tegemise ajal.

Laosolekus

Free pickup point for orders over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

via our network of certified installers

Find an installer

Support service

Choose additional installation support

Technical specifications

Ühenduse tüüp	9 broches (sonde CPT-S/DVS) / 15 broches (Element HV)
Kaabli tüüp	Câble adaptateur
Ühilduv võrgustik	Sonar CHIRP
Traadivõrk	Raymarine Sonar propriétaire
Töötav pinge	12V CC
Töötamise temperatuur	-10 à +50°C
Salvestustemperatuur	-20 à +70°C
IP-tunnus	IPX7
Sertifikaadid	CE
Toote tüüp	Câble adaptateur
Ühilduvad mudelid	Sondes Raymarine CPT-S/DVS (9 broches); Écrans multifonctions Raymarine Element HV (15 broches)

Detailed description

Raymarine A80559 adaptiivkaabel on mõeldud ühendamiseks traditsiooniliste CHIRP-sondide CPT-S/DVS (9 kontaktiga ühendus) ja Element HV seeriale kuuluvate multifunktsionaalsete ekraanidega (15 kontaktiga ühendus). See tehniline lahendus võimaldab kasutajatel oma olemasolevaid transduktoreid kasutada süsteemi uuendamisel, optimeerides seega varasemaid investeeringuid.

Ühenduvus ja Raymarine süsteemide integratsioon

Raymarine Element HV seeria, tuntud oma HyperVision sonaritehnoloogia poolest, kasutab 15 kontaktiga sondiühendusi. Samal ajal kasutavad CPT-S ja CPT-DVS sondid, mis on sageli seotud varasemate Dragonfly seeria või teiste Raymarine MFD-dega, 9 kontaktiga ühendust. A80559 kaabel loob elektri- ja andmeside nende kahe standardi vahel, võimaldades Element HV ekraanidel tõlgendada CPT-S/DVS sondide sonar-signaale. CPT-S sondid, nagu näiteks läbiviidavad plastikust või pronksist mudelid (E70339, A80446, E70340, A80447, E70341, A80448, A80545), on tuntud oma vastupidavuse ja merekindluse poolest.

Tehniline positsioneerimine ja kasutaja eelised

See Raymarine A80559 adaptiivkaabel on strateegilise integratsiooni komponendiks. See võimaldab vältida CPT-S/DVS sondi süstemaatilist asendamist funktsioneeriva Element HV ekraani hankimisel, vähendades seeläbi nii kulusid kui ka paigaldamise keerukust (uute kereavade või tagaseina uute toestike puurimine). Kuigi Element HV ekraanid on optimeeritud HyperVision sondide jaoks (mitte kaasas), võimaldab CPT-S/DVS sondi kasutamine selle kaabli abil töökindla traditsioonilise CHIRP-sonari võimaluse. See lähenemine erineb täielikust Element HV + HyperVision sondi lahendusest, pakkudes järkjärgulist ja majanduslikult tõhusamat uuendusteed, mis sobib eriti purjetajatele, kes soovivad säilitada osa olemasolevast varustusest, samal ajal kasutades uute kuvamistehnoloogiate eeliseid.

Documentation

Type	Nom
	EN - Declaration de conformite - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	EN - Declaration de conformite - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	EN - Gabarit de montage - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	EN - Declaration de conformite - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	EN - Declaration de conformite - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	EN - Declaration de conformite - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	EN - Notice d'installation - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	FR - Notice d'installation - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	EN - Notice d'installation - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	FR - Notice d'installation - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	EN - Notice d'installation - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	FR - Notice d'installation - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	EN - Gabarit de montage - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)

Expert review

Pol CONIN

Digital Manager

« Integration of CPT-S/DVS transducers with Raymarine Element HV displays »

The Raymarine A80559 adapter cable is a pragmatic solution for recreational boaters considering an upgrade to the Element HV series while retaining their existing CPT-S or CPT-DVS transducer. Its practical value lies in enabling reuse of an expensive and often complex component to replace, such as a through-hull transducer, thereby avoiding additional hull work. It primarily targets boat owners equipped with Raymarine transducers from previous generations who do not wish to immediately invest in a new HyperVision transducer.

Installation of this cable is straightforward: it is a direct plug-and-play connection between the 9-pin connector of the CPT-S/DVS transducer and the 15-pin port of the Element HV display. This significantly simplifies integration and reduces vessel downtime. This approach differs from a complete solution with a dedicated HyperVision transducer by offering a cost-effective alternative. It is particularly relevant if the sonar capabilities of the CPT-S/DVS transducer are deemed sufficient for the user's primary needs, or if the budget does not allow for a full replacement.

It is critical to understand the limitations of this adapter: it ensures physical and electrical compatibility but does not convert a CPT-S transducer into a HyperVision transducer. To fully leverage the 1.2 MHz frequencies and ultra-high-resolution imaging performance of HyperVision, a dedicated probe for this technology is essential. The A80559 cable is therefore a functional bridge for traditional CHIRP technology, serving as a transitional solution or a useful complement rather than a replacement for the native capabilities of Element HV displays.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Adaptiivkaabel CPT-S/DVS-sondi (9 kontaktiga) ühendamiseks Element HV-ga (15 kontaktiga)

99,65€

99,65€ ~~108,00€~~

Complete your installation with

Complementary equipment

Raymarine

AIS 700 klass B transponder VHF antenni jagaja integreeritud

Ref : E70476

1.305,60€

1.305,60€ ~~1.434,00€~~

Raymarine

i70s multifunktsiooninäidik

Ref : E70327

678,00€

678,00€ ~~714,00€~~

Frequently asked questions

Need help? Contact us

What is the Raymarine A80559 adapter cable used for?

The Raymarine A80559 adapter cable is designed to connect traditional CHIRP transducers of the CPT-S and CPT-DVS types (equipped with a 9-pin connector) to Element HV series multifunction displays (which use a 15-pin connector). It allows you to reuse your existing transducer when upgrading your navigation system.

Which Raymarine transducers are compatible with this A80559 cable?

This cable is compatible with Raymarine transducers equipped with a 9-pin connector, specifically models in the CPT-S series (for traditional CHIRP sonar) and CPT-DVS series (for DownVision and SideVision sonar). This includes transducers such as CPT-100, CPT-110, CPT-120, as well as CPT-S models with references E70339, A80446, E70340, A80447, E70341, A80448, and A80545.

With which Raymarine multifunction displays is this cable compatible?

The A80559 adapter cable is specifically designed for use with Raymarine Element HV series multifunction displays, which feature a 15-pin transducer connector.

Does this cable allow me to use the HyperVision functions with my CPT-S/DVS transducer?

No. This adapter cable allows your Element HV display to use the traditional CHIRP sonar signals from your CPT-S transducer or the DownVision/SideVision signals from your CPT-DVS transducer. The advanced HyperVision functions on Element HV displays require specific HyperVision transducers, which are not included with this cable and are not supported by CPT-S/DVS transducers.

Is it difficult to install the A80559 adapter cable?

The A80559 adapter cable is designed for a simple and direct plug-and-play connection between your existing transducer and your new Element HV display. Simply connect the 9-pin end to your CPT-S/DVS transducer and the 15-pin end to your Element HV display. The cable itself does not require any specific tools for installation, but accessing the connectors on the transducer and display may vary depending on your boat's setup.

What is the advantage of using this adapter cable instead of buying a new depth sounder?

The main advantage of this cable is that it allows you to keep and reuse your existing Raymarine CPT-S or CPT-DVS depth sounder when purchasing an Element HV display. This represents significant savings by avoiding the purchase of a new depth sounder and simplifies installation by eliminating the need to drill new holes in the hull or modify the transom mount for a new depth sounder.

Is this cable compatible with CPT-DV transducers or older DownVision/SideVision transducers (CPT-100/110/120)?

Yes, this cable is compatible with Raymarine CPT-DV transducers and older DownVision/SideVision transducers such as the CPT-100, CPT-110, and CPT-120. All these transducers use a 9-pin connector, making them adaptable to Element HV displays (15-pin) via A80559 cable.