Raymarine i50 Depth sügavusekraan

The Raymarine i50 Depth display is a navigation instrument specifically designed to accurately show underwater depth. It is ideal for safe navigation, particularly in areas with strong tidal ranges or shallow waters.

The display has compact dimensions of 110 x 115 x 44 mm (width x height x depth). Its design allows for perfect flush mounting on your boat's console or dashboard.

Yes, this instrument is designed for harsh marine environments. It has IPX6 waterproofing, providing effective protection against breaking waves and heavy water spray.

Absolutely. The display features very large digits and offers excellent viewing angles (+70° / -70°), ensuring perfect readability both day and night, even when offset from the instrument.

The display unit manages several essential sound and visual alarms for safety: a shallow water alarm (minimum depth) and a maximum depth alarm. You can adjust the thresholds according to your navigation needs.

Yes, you can configure the measurement unit to your preference during user calibration. The display allows you to set depth in metres (m), feet (ft) or fathoms (fa).

Yes, it features adjustable backlighting. Additionally, if connected to a SeaTalk NG network, it can participate in group illumination, allowing synchronization of the backlighting level across all compatible Raymarine instruments.

No, the reference E70059 corresponds to the i50 Depth display sold separately (without sensor). If you do not have an existing transducer, you will need to purchase a compatible depth sounder separately or choose a complete package.

The i50 Depth is dedicated solely to displaying depth. The i50 Tridata, on the other hand, combines depth, speed (log), and water temperature data on a single screen divided into three zones.

Installation is done by flush mounting (Flush Mount). A template is provided to precisely cut your console. The screen is then fixed from the front, and the bezel (lens) clips on top for a clean finish.

The instrument operates on a 12 V DC electrical system. Its acceptable operating voltage range is 10 V to 16 V DC.

The device is powered directly via the SeaTalk NG network. Simply provide a 12V power supply to the main SeaTalk NG backbone, which will then distribute power to the display via its spur cable.

Yes, the installation must be protected. The SeaTalk NG network power cable must be connected to the 12 V battery via a 5 amp inline fuse or an equivalent thermal circuit breaker.

The i50 Depth display has a dedicated rear connection (terminal block type) allowing direct connection of wires from a compatible Raymarine or Airmar analog depth sounder transducer.

Yes, the display is fully compatible with the NMEA2000 protocol via Raymarine's SeaTalk NG connectivity. It can thus share depth data with your chartplotters and other NMEA2000 devices.

Yes. The i50 Depth is designed to be backward-compatible with the older SeaTalk 1 standard. It includes the necessary connectivity to integrate easily into legacy instrument networks (such as the ST60 series).

The display is compatible with numerous Raymarine and Airmar analog transducers, such as the P17, P319, P79 (In-hull), B17, B45, or the P66. You can use through-hull, glue-on, or transom-mounted transducers.

Yes. If the depth transducer is connected to another instrument or a sounder module on the network, the i50 Depth will automatically configure itself in Repeater mode to display data received via the SeaTalk NG or SeaTalk 1 network.

Only a clean, damp cloth should be used to wipe the screen. Never use abrasive, acidic, ammonia-based, or solvent products, as they may damage the screen treatment and compromise waterproofing.