Sonde bronze traversante à faisceau conique HIGH CHIRP angle 12° CPT-S, 10m câble

Free pickup point for orders over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

via our network of certified installers

Find an installer

Support service

Choose additional installation support

Säästad 4%

Raymarine

E70340

Käik läbiv pronks sond koonilise kiirega HIGH CHIRP, nurk 12° CPT-S, 10 m kaabel

La sonde bronze traversante RAYMARINE E70340 CPT-S offre une détection sous-marine précise grâce à son faisceau conique HIGH CHIRP de 12°. Conçue pour une durabilité accrue en milieu marin, elle est idéale pour les MFD Raymarine compatibles nécessitant un sonar traditionnel performant. La sonde est fournie avec un câble de 10m intégré.

Nurk: 12 degrees

0 degree 12 degrees 20 degrees

Public priceGet pro pricing

308,58€

308,58€ ~~324,00€~~

Käibemaksuga Tarne arvutatakse makse tegemise ajal.

Laosolekus

Free pickup point for orders over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

via our network of certified installers

Find an installer

Support service

Choose additional installation support

Technical specifications

Toetatud sonari tehnoloogiad	CHIRP Haute Fréquence
Sonari sagedused	170-230
Töötamise temperatuur	-10 à +50
Maksimaalne süvisandmete lugemissügavus	274.0
Sondi materjal	Bronze
Sonariühenduse tüüp	Raymarine CPT-S
Kaabli pikkus	10.0
Ühilduvad kuvarid	Raymarine Axiom, Element, Dragonfly (avec adaptateur si nécessaire)
Toote sügavus	100
IP-tunnus	IPX6/IPX7
Traadita ühenduvus	Non
Montaažitüüp	Traversante
Sertifikaadid	2013/53/EU,EN ISO 8846:2017
Kiire kaetavusnurk	25
CHIRP-i kõrgsagedus	170-230
Sisseehitatud kiirusandur	Non
Väljaandmise aasta	2017.0
Garantii	2.0

Detailed description

RAYMARINE E70340 käik läbiv sond on allveetuvastuse lahendus, mis on loodud CHIRP sondisüsteemide jaoks. See CPT-S mudel on pronksist käik läbiv sond koonilise kiirega HIGH CHIRP, mille nurk on 12° ja mis kompenseerib laeva V-kujulist põhja. Sond on varustatud 10 meetri pikkuse sisse ehitatud kaabliga, mis lihtsustab paigaldamist erinevatele veesõidukitele.

Täpne CHIRP sonaritehnoloogia

See sond kuulub Raymarine CPT-S seeriasse ja kasutab HIGH CHIRP tehnoloogiat, et pakkuda detailsemaid sonaripöördusi ja paremat sihtmärkide eraldamist. Erinevalt DownVision süsteemidest, mis pakuvad põhja fotorealistlikku kujutist, keskendub see mudel traditsioonilisele koonilisele kiirele, mis on optimeeritud kalade avastamiseks ja merepõhja täpseks jälgimiseks erinevates sügavustes. Pronksist konstruktsioon teeb sellest vastupidavama variandi võrreldes plastikversioonidega (nagu A80447 samal 12° nurgal), eriti sobiva keerukate merikeskkondade ja puit- või klaaskiudkerega laevade jaoks.

Paigaldus ja vastavus

E70340 sond on mõeldud käik läbivaks paigaldamiseks, mis nõuab keres augustamine. 12° nurk on eelkõige valitud laevadele, mille põhja deadrise on mõõdukas, tagamaks, et sonarikiir suunatakse vertikaalselt merepõhja. Sondi kaablit ei tohi kunagi lõigata, sest see põhjustaks sonari jõudluse olulise halvenemise, tühistaks Euroopa CE märgi ja kehtetuks tunnistamise. See toode vastab harmoniseeritud standarditele 2013/53/EÜ ja EN ISO 8846:2017, tagades selle töökindluse ja ohutuse merekasutuseks. Optimaalseks jõudluse saavutamiseks peab sond olema kasutatud ainult vees, et vältida ülekahjustust.

Documentation

Type	Nom
	EN - Plan technique - Sonde bronze traversante à faisceau conique HIGH CHIRP angle 12° CPT-S, 10m câble
	EN - Declaration de conformite - Sonde bronze traversante à faisceau conique HIGH CHIRP angle 12° CPT-S, 10m câble
	EN - Declaration de conformite - Sonde bronze traversante à faisceau conique HIGH CHIRP angle 12° CPT-S, 10m câble
	EN - Declaration de conformite - Sonde bronze traversante à faisceau conique HIGH CHIRP angle 12° CPT-S, 10m câble
	EN - Notice d'installation - Sonde bronze traversante à faisceau conique HIGH CHIRP angle 12° CPT-S, 10m câble
	FR - Notice d'installation - Sonde bronze traversante à faisceau conique HIGH CHIRP angle 12° CPT-S, 10m câble

Expert review

Pol CONIN

Digital Manager

« Technical analysis of the Raymarine CPT-S bronze 12° CHIRP transducer »

The Raymarine CPT-S E70340 transducer is a technically sound choice for recreational boaters and anglers seeking a reliable and robust CHIRP sonar solution. Unlike RealVision 3D multi-element sensors that provide sophisticated imaging, this model focuses on the performance of a dedicated HIGH CHIRP conical beam. Its bronze construction is a major advantage for durability, outperforming plastic versions in harsh marine environments, particularly for boats kept afloat year-round or in saltwater. It is particularly well-suited to wooden or fiberglass hulls, where a through-hull installation is preferred to avoid turbulence.

The 12° beam angle of the transducer is specifically designed to compensate for the deadrise of moderately angled hulls, ensuring the sonar beam is perpendicular to the seabed for optimal readings. It is essential to verify the compatibility of this angle with your hull design before installation to avoid beam tilt that would degrade performance. Although the CPT-S series is an earlier generation compared to newer RealVision systems, it remains relevant for compatible Raymarine MFDs (such as Dragonfly models or certain A, eS, and gS series) requiring a traditional CHIRP sonar for accurate fish detection and bathymetry.

A through-hull installation, while more complex than a transom-mount setup, delivers superior hydrodynamic performance and better transducer protection. It requires careful attention to hull drilling and watertight sealing to maintain the vessel's integrity. This transducer does not provide DownVision or SideVision imaging, so it is best suited if your primary need is a high-performance traditional CHIRP sonar without advanced imaging features, or if you are complementing an existing system.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Käik läbiv pronks sond koonilise kiirega HIGH CHIRP, nurk 12° CPT-S, 10 m kaabel

308,58€

308,58€ ~~324,00€~~

Complete your installation with

Complementary equipment

Raymarine

AIS 700 klass B transponder VHF antenni jagaja integreeritud

Ref : E70476

1.305,60€

1.305,60€ ~~1.434,00€~~

Frequently asked questions

Need help? Contact us

What is HIGH CHIRP technology and what is the purpose of the cone beam of this depth sounder?

The HIGH CHIRP technology used by this Raymarine CPT-S depth sounder provides highly detailed sonar returns and improved target separation underwater. Unlike DownVision imaging systems, the traditional cone beam of this depth sounder is optimized for precise fish detection and seabed tracking at various depths.

Why does this through-hull transducer have a 12° angle?

The 12° angle of this transducer is specifically designed to compensate for the deadrise of your vessel's hull. This ensures the sonar beam is directed vertically toward the seabed, providing optimal performance and accurate readings, particularly for hulls with moderate deadrise.

What type of installation is required for this Raymarine transducer?

This transducer is a through-hull model, which means it requires drilling the hull of your boat for installation. Raymarine recommends installation by a certified installer to ensure proper installation and to maintain the benefits of the enhanced warranty.

Can I cut the depth sounder cable if its 10-meter length is excessive for my boat?

No, you must not cut the depth sounder cable. Cutting the cable will significantly reduce the fishfinder's performance, void the product warranty, and invalidate the European CE mark. If the cable is cut, it cannot be repaired and must be replaced.

Which Raymarine devices is this CPT-S transducer compatible with?

This CPT-S transducer is designed to be compatible with Raymarine CHIRP fishfinder systems. It typically works with Raymarine multifunction displays (MFD) from the Axiom and Element series, as well as some Dragonfly models that support CPT-S conical-beam transducers.

Why is this transducer made of bronze rather than plastic?

This transducer is made of bronze to provide increased durability, particularly suited to demanding marine environments. Bronze is a more robust option than plastic and is recommended for fiberglass or wooden hulls, ensuring better longevity and resistance to the elements.

How should I maintain and clean my depth sounder to ensure its performance?

To maintain your depth sounder’s performance, follow these recommendations:

Apply a thin layer of water-based antifouling paint to the transducer to prevent marine growth buildup. Reapply every 6 months or at the start of each season.
Clean the transducer with a soft cloth and mild household detergent.
For stubborn grime, use a scrubbing pad such as a Scotch Brite™ pad, taking care not to scratch the transducer face.
Warning: Never use ketone-based paint, spray paint, or harsh cleaning solvents like acetone, as they will damage the transducer.

Which compliance standards does this Raymarine transducer meet?

This Raymarine E70340 transducer complies with European harmonised standards. It meets Directive 2013/53/EU for marine equipment and EN ISO 8846:2017, ensuring reliability and safety for marine use.