Pakett 2 Raymarine läbivooderdatud RVM-412 12° sondid vasak/ parem külg, ühilduvus AXIOM2 ja RVM1600 (2 x 2 m kaabel Y ja 8 m pikendus)

The Raymarine RVM-412 transducer kit is designed to provide detailed and three-dimensional underwater imaging using RealVision Max 3D technology. It allows visualization of the seabed structure, fish, and submerged objects with enhanced clarity, which is essential for fishing and navigation.

The RVM-412 transducers are through-hull stainless steel transducers, specifically angled at 12°. They are designed to be installed on port and starboard sides, optimizing RealVision Max 3D sonar performance on hulls with significant deadrise angles (between 8° and 15°).

The RVM-412 sounders use Sonar RealVision Max 3D technology. This technology provides three-dimensional underwater imaging, enabling detailed visualization of the seabed and submerged objects.

Including two transducers, one for port and one for starboard, ensures consistent SideVision and DownVision coverage without blind spots. This setup is particularly beneficial for hulls with significant deadrise angles, guaranteeing optimal signal quality.

The RVM-412 depth sounders are made of stainless steel, a robust material suited to demanding marine environments.

This pack is specifically designed for deep-V hulls with a deadrise angle between 8° and 15°. The 12° tilt of the transducers is optimized for these hull types.

Yes, the RVM-412 kit includes a complete wiring set: two 2-metre depth sounder cables, a Y-cable for combined connection of both transducers, and an 8-metre extension.

The RVM-412 transducers are directly compatible with Raymarine AXIOM2 multifunction displays.

Yes, the RVM-412 transducer pack is compatible with the Raymarine RVM1600 fishfinder module.

Yes, the RVM-412 transducers integrate seamlessly into Raymarine's LightHouse 4 ecosystem, ensuring straightforward installation and configuration.

The pack is designed to integrate with the LightHouse 4 ecosystem. It is always recommended to ensure your AXIOM2 display or RVM1600 module runs the latest LightHouse software version for optimal performance.

After installation, an AHRS (Attitude and Heading Reference System) calibration from RealVision is required. This calibration ensures precise stabilization of the sonar image for optimal visualization.

Typical tools for installing through-hull transducers include a drill, appropriate drill bits for hull penetration, wrenches, marine sealant, and cleaning products. Detailed instructions are provided in the installation manual.

Installation requires drilling holes in the hull. For fiberglass sandwich hulls, specific precautions are needed to seal the core and prevent water ingress. It is critical to follow the manual’s instructions for positioning and drilling.

Yes, antifouling paint can be applied to transducers. It is important to use compatible products and follow the manufacturer's recommendations to avoid degrading transducer performance.

The pack includes two depth sounder cables, each 2 meters long, one Y-cable, and an 8-meter extension, providing flexible total length for installation.

The two 2-meter transducers connect to a Y-cable included in the kit. This Y-cable combines the signals from both transducers before routing them to the display or sounder module via the 8-meter extension.

Yes, it is recommended to follow general marine wiring guidelines, particularly regarding cable routing, protection against stress, and shielding to avoid electromagnetic interference (EMC).

After installation, it is recommended to run a transducer test and AHRS RealVision calibration. The LightHouse 4 system user manual provides instructions for verifying sonar data and troubleshooting.

The 12° tilt of the transducers is critical to compensate for the hull’s deadrise angle (V). This ensures the sonar beam is directed vertically toward the seabed, even when the boat is stationary or moving, providing a stable and accurate sonar image.