Pakett i50 Loch koos läbiva tagasipöörleva kiiruse/temperatuurianduri ST900/P120

The i50 Loch Raymarine T70583 pack includes the following:

An i50 Speed display. A retractable through-hull ST900/P120 transducer that measures speed and water temperature.

The i50 Speed display is optimized to clearly show your vessel's speed through the water as well as sea surface temperature.

The main advantage of the ST900/P120 transducer is its retractable design. This greatly simplifies maintenance operations, allowing you to remove the transducer for cleaning or servicing without having to take the boat out of the water.

The i50 Speed display has an IPX6 waterproof rating, ensuring reliability in a marine environment.

The i50 Loch Pack is a dedicated instrumentation solution for speed and temperature. It can operate as a standalone system for these functions, but it is also designed to integrate and complement other Raymarine systems, such as Axiom or eS Series multifunction displays, or other instruments in the i50/i60/i70 series.

The ST900/P120 transducer measures the vessel's speed through the water using a paddlewheel or similar mechanism that spins due to the water flow. It transmits this data to the i50 Speed display.

No, the i50 Loch pack is specifically designed to display speed and water temperature. For depth information, you would need a dedicated instrument such as the Raymarine i50 Depth, or a multifunction display compatible with a depth transducer.

Yes, the i50 Speed display is optimized for clear data readability. It features illumination and contrast settings that can be adjusted to improve visibility in various lighting conditions, including full sunlight or at night.

The i50 Loch pack is designed for sailors seeking essential and dedicated navigation data, such as speed and water temperature, with flexible integration into marine electronic systems.

The i50 Loch pack is designed for network integration via multiple protocols:

SeaTalkNG: Raymarine’s proprietary protocol, NMEA 2000-compatible.NMEA 2000: The system is fully compatible with NMEA 2000 networks via SeaTalkNG.SeaTalk 1: For older installations, ensuring extended compatibility.

Yes, the i50 Speed system is designed to be compatible with older installations thanks to its support for the SeaTalk 1 protocol, allowing seamless integration with your existing Raymarine equipment.

Yes, the i50 Loch pack is designed as a dedicated instrumentation solution that complements Raymarine multifunction displays such as the Axiom or eS series, ensuring seamless integration with your overall navigation system.

The i50 Speed display is specifically designed to receive speed and temperature data from the included ST900/P120 depth sounder or other depth sounders compatible with i50 Speed instruments. To connect other types of sensors (such as depth), you would need dedicated instruments (such as the i50 Depth) or a protocol converter if the sensor uses a different protocol.

Yes, thanks to its compatibility with the SeaTalkNG network, which is itself NMEA 2000 compatible, the i50 Loch pack can communicate and exchange data with equipment from other brands supporting the NMEA 2000 protocol.

The i50 Speed system can be powered in two ways:

Via the SeaTalkNG network.
By direct connection to a 12 V or 24 V onboard electrical system.

Yes, when directly connected to a 12 V or 24 V electrical system, it is mandatory to use an inline fuse with the appropriate rating to ensure optimal system protection. The installation instructions provide details on the recommended fuse size.

When installing the ST900/P120 through-hull transducer, it is critical to follow the installation manual instructions. This includes selecting an optimal location on the hull for accurate and turbulence-free measurements, and ensuring perfect waterproofing after drilling and installation to prevent water ingress.

No, it is strongly advised not to cut, shorten, or splice the depth sounder cable, nor to remove the connector. If the cable is severed, it cannot be repaired and this may void the manufacturer's warranty. It is recommended to manage excess cable by coiling it neatly.

Installing the display and transducer requires standard marine mounting tools, such as a drill, diamond hole saws for the display and transducer, screwdrivers, and sealing materials. The installation manual provides a detailed list of required tools.

Yes, the Raymarine i50 Loch T70583 pack is covered by Raymarine’s standard manufacturer warranty. To register your product and obtain the specific warranty details, it is recommended to visit Raymarine’s official website.