Capteur Trifonctions Sondeur/Loch et Température

Free pickup point for orders over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

via our network of certified installers

Find an installer

Support service

Choose additional installation support

Säästad 13%

Raymarine

T910

Kolmefunktsiooniline sondi/kiirusemõõtja/temperatuuriandur

Le Raymarine T910 est un émetteur de coque conçu pour traiter les données de profondeur, vitesse et température d'un triducer, s'intégrant au système 12/24Vdc du bateau. Cette unité est essentielle pour centraliser et transmettre ces informations de navigation. Inclus : vis auto-foreuses et gabarit de montage.

Public priceGet pro pricing

217,46€

217,46€ ~~252,00€~~

Käibemaksuga Tarne arvutatakse makse tegemise ajal.

Laosolekus

Free pickup point for orders over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

via our network of certified installers

Find an installer

Support service

Choose additional installation support

Technical specifications

Töötav pinge	12/24 V
Toote laius	47 mm
Toote kõrgus	52.5 mm
Toote sügavus	42.5
Võrguühilduvus	NMEA 2000
Traadivõrk	NMEA 2000
Montaažitüüp	Montage en surface
Automaatselt sulgev klapp	Non
Sissepõlemine	Non
Paigalduskoht	Intérieur, au-dessus de la ligne de flottaison, ventilé
Kiiruse kalibreerimine	Via système de navigation connecté
Temperatuuri mõõtmine	Oui
Anduri väljundliiki tüüp	Numérique (NMEA 2000)
Anduri tüüp	Interface de capteur multifonction

Detailed description

Raymarine T910 on veealune anduriühenduse seade, mis on mõeldud kolmefunktsioonilise anduri (triducer) andmete töötlemiseks: sügavuse, kiiruse ja temperatuuri mõõtmine. See seade toimib vaheühendina triduceri ja laeva navigeerimissüsteemi vahel, konsolideerides need kolm olulist parameetrit täpseks jälgimiseks. Seade on ühilduv 12/24V alalisvoolu bordsisüsteemiga ja seda saab toita ka Raymarine päikesepaneelilt, kui pühendumata vooluallikat pole saadaval.

T910 paigaldamine ja ühenduvus

Raymarine T910 paigaldamine nõuab strateegilist asukohta pardal. Seade peab olema paigaldatud püstiselt, kaablid allpoolt väljaulatudes, ja kindlasti vähemalt 50 cm veeliinist kõrgemale. On oluline vältida otsest kontakti veega ja eelistada hästi ventileeritud ala, välistades suletud veekindlad sektsioonid. Paigaldamine toimub kolme 2,5 mm auguga, kasutades kaasasolevaid enesepuurivaid kruvisid, jälgides, et korpust ei liiga tihedalt surutaks.

Juhtmete ja ühenduvuse täpsemad nõuded

Triduceri kaablite ühendamine Raymarine T910’ga peab järgima kindlat värvikoodi. Triduceri puhul peab maaekraan ühendama sügavuse pistiku külge, mitte kiiruse külge, et vältida lühiseid. Kui kasutatav kiiruseanduril pole temperatuuriandurit sisse ehitatud, tuleb kiiruse pistiku pruuni ja valge juhet ühendada signaali pidevuse tagamiseks. Kontaktidele silikoonrasva kasutamine on soovitatav optimaalse ühenduse saavutamiseks, samuti kaablide toestamine läheduses. Lõpuks peab kaas olema õigesti paigaldatud, et hoida välised kaablikestad seadme sees, tagades kogu juhtmeühenduse adekvaatse kaitse.

Documentation

Type	Nom
	EN - Gabarit de montage - Capteur Trifonctions Sondeur/Loch et Température
	EN - Notice d'installation - Capteur Trifonctions Sondeur/Loch et Température
	EN - Manuel d'utilisation - Capteur Trifonctions Sondeur/Loch et Température
	EN - Manuel d'utilisation - Capteur Trifonctions Sondeur/Loch et Température
	EN - Manuel d'utilisation - Capteur Trifonctions Sondeur/Loch et Température
	EN - Manuel d'utilisation - Capteur Trifonctions Sondeur/Loch et Température
	EN - Manuel d'utilisation - Capteur Trifonctions Sondeur/Loch et Température

Expert review

Pol CONIN

Digital Manager

« Raymarine T910 interface: reliable management of triducer data »

The Raymarine T910 is an essential hull-mounted transmitter for vessels requiring reliable centralization of core navigation data: depth, speed, and temperature. This module is not the sensor itself, but the electronic interface that receives and processes signals from an external triducer. Its practical value lies in converting raw sensor data into usable information for the onboard electronic system, often for integration into an NMEA or SeaTalkNG network, with NMEA output protocol specifically mentioned in the technical documentation.

Installing the T910 requires consideration. As a hull-mounted transmitter, it is installed inside the vessel, simplifying maintenance and avoiding additional hull penetrations compared to a through-hull transducer. However, this involves specific constraints: vertical mounting, more than 50 cm above the waterline, and in a ventilated space away from direct moisture. These requirements are critical for ensuring longevity and signal reliability. Installers must pay close attention to transducer wiring, including grounding the shield to the depth connector for triducers, and bridging the brown and white terminals if the speed sensor does not include a temperature probe. These details are decisive for proper operation and system integrity.

This type of interface is particularly relevant for owners looking to modernize or improve the reliability of their navigation data acquisition without replacing all their sensors. It serves as a key component for converting and transmitting basic data, often a prerequisite for display on multifunction instruments or dedicated screens. It is not suitable for direct exposure to the elements or installation in hermetically sealed compartments that would prevent necessary ventilation.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Kolmefunktsiooniline sondi/kiirusemõõtja/temperatuuriandur

217,46€

217,46€ ~~252,00€~~

Frequently asked questions

Need help? Contact us

What are the prerequisites for drilling the mounting holes for the T910?

You must drill three 2.5 mm holes. These holes are marked "B" on the mounting template provided with the device.

Which screws should be used to mount the T910, and are there any precautions?

The T910 must be mounted using the self-tapping screws provided. It is critical not to overtighten the screws, as this could damage the housing molding.

How to connect the transducer cables to the Raymarine T910?

Connecting the transducer cables to the Raymarine T910 must follow the specific color code indicated on the unit. It is also necessary to sleeve the shields to prevent short circuits.

How to connect the ground braid of a triducer to the T910?

For a triducer, the ground braid MUST be connected to the depth connector, not the speed connector. This prevents short circuits and ensures proper operation.

What to do if my speed sensor has no integrated temperature probe?

If your speed sensor does not include a temperature probe, you must connect the brown and white wires of the speed connector. This connection ensures signal continuity.

Should a product be applied to the T910 connection terminals?

Yes, it is recommended to apply silicone grease to the connection terminals to optimize connection quality and protect it.

How to ensure proper cable management after connection to the T910?

It is recommended to support the cables near the transmitter. Additionally, the unit's cover must be correctly positioned to keep the outer cable sleeves inside the transmitter, ensuring their secure attachment and protection.

How to check that the T910 cover is correctly installed?

Ensure the cover is properly seated and that it secures the outer sheaths of the cables inside the transmitter housing. This ensures connection protection and the longevity of the installation.

Is the T910 compatible with all types of transducers?

The Raymarine T910 is specifically designed to be used with a trifunction transducer (triducer) measuring depth, speed, and temperature. Its compatibility will therefore depend on the type of triducer you own.

Can the T910 be used with older transducers?

Yes, the T910 can potentially be used with older transducers. However, it is advisable to carefully check the connections, especially if the speed sensor does not have an integrated temperature probe, in which case a link between the brown and white terminals of the speed connector will be required.

What types of data can the T910 process?

The T910 is designed to process and interface depth, speed (log), and temperature data. These three types of measurements are consolidated by the unit for your navigation system.

Can incorrect installation of the T910 affect the warranty?

Yes, failure to follow the installation instructions provided with the Raymarine T910 may void your warranty. It is therefore essential to strictly adhere to all guidelines for installation and wiring.