RayNet-kaabel RJ45-ühendiga – 10 m

This cable is designed to interconnect Raymarine marine navigation equipment with a RayNet port and standard network devices using an RJ45 connector. It allows you to extend the flexibility of your Raymarine SeaTalkhs network by connecting, for example, a Raymarine multifunction display (MFD) to a Wi-Fi router, a shipboard computer, or other non-RayNet Ethernet peripherals.

The Raymarine RayNet to RJ45 cable (reference A80159) is 10 meters long.

The main difference lies in the types of connectors at the ends:

A RayNet to RJ45 cable (such as model A80159) has a RayNet connector at one end and a standard RJ45 connector at the other. It is used to connect a Raymarine device to a generic network device.A RayNet to RayNet cable has RayNet connectors at both ends. It is used to connect two Raymarine devices to each other within a SeaTalkhs network.

This cable is compatible with all Raymarine multifunction displays (MFD) and other devices equipped with a RayNet port, which is part of Raymarine's proprietary SeaTalkhs marine Ethernet network. It allows connection to a standard Ethernet network via the RJ45 connector.

Yes, absolutely. The RJ45 end of this cable is specifically designed to connect to standard Ethernet devices, such as Wi-Fi routers, onboard computers, network switches, or other Ethernet access points. This allows you to integrate your Raymarine equipment into a larger network or access features like software updates or data visualization on a PC.

The RayNet connector is a proprietary design by Raymarine, specifically engineered for the marine environment. It is rugged and provides a watertight and reliable connection. However, the RJ45 connector is an Ethernet standard and is not inherently watertight. It is therefore critical to protect the RJ45 end from moisture and water spray during installation aboard a boat, using watertight housings or installing it in a dry location.

Yes, this cable is designed to support high-speed Ethernet communications, which is essential for Raymarine's SeaTalkhs network. It enables rapid transfer of navigation data, radar images, charts, and other critical information between Raymarine devices and standard network peripherals connected via the RJ45 interface.

When installing in a marine environment, it is recommended to:

Protect the RJ45 end: Ensure the RJ45 connector is installed in a dry location protected from moisture, water spray, and corrosion, as it is not waterproof.

Cable routing: Avoid running the cable near sources of electromagnetic interference (engines, high-voltage cables).

Securing: Secure the cable properly to prevent excessive strain on connectors and to avoid damage from vibrations or boat movement.

Bend radius: Respect the minimum bend radius to avoid damaging the cable’s internal conductors.