Paindlik juhtimisjuhe H05VV5F 2X1.5 hall TGL

The H05VV5-F 2x1.5 mm² grey flexible control cable TGL is used for electrical wiring on board, for power, control, or auxiliary connections depending on its cross-section and the H05VV5-F control cable family.

The wire gauge must be sized based on current intensity, round-trip length, acceptable voltage drop, and upstream protection installed.

The indicated configuration is 2X1.5 mm². The letter G typically denotes the presence of a green/yellow conductor, while X indicates a version without a protective conductor.

Check the actual routing path, bend radius, bulkhead penetrations, mechanical protection, and marking of both ends before crimping.

Installation depends on the cable family and its sheath. In wet or exposed environments, use protected routing and properly insulated terminations.

Yes. This SKU is managed in meters in Odoo: order the quantity corresponding to the required length, allowing extra for routing and service loops.