Paindlik juhtimisjuhe H05VV5F 2X1 hall TGL

The H05VV5F 2X1 grey TGL flexible control cable is used for electrical wiring on board, including power circuits, control systems, or auxiliary connections, depending on its cross-section and H05VV5-F control family classification.

The wire gauge must be sized based on current intensity, round-trip length, acceptable voltage drop, and upstream protection.

The indicated configuration is 2X1 mm². The letter G typically denotes the presence of a green/yellow conductor, while X indicates a version without a protective conductor.

Check the actual routing path, bend radius, bulkhead penetrations, mechanical protection, and labeling of both ends before crimping.

Installation depends on the cable family and its jacket. In wet or exposed environments, use protected routing and properly insulated terminations.

Yes. This reference is managed in meters in Odoo: order the quantity corresponding to the required length, allowing a margin for routing and service loops.