Paindlik juhtimisjuhe H05VV5F 4G1 hall TGL õli- ja lõikemisõlise vastupidavusega

The H05VV5-F 4G1 grey TGL flexible control cable, resistant to cutting oils, is used for electrical wiring on board, for power, control, or auxiliary connections depending on its cross-section and the H05VV5-F control cable family.

The wire gauge must be sized based on current intensity, round-trip length, acceptable voltage drop, and upstream protection installed.

The indicated configuration is 4G1 mm². The letter G typically indicates the presence of a green/yellow conductor, while X denotes a version without a protective conductor.

Check the actual path, bend radius, bulkhead penetrations, mechanical protection, and marking of both ends before crimping.

Installation depends on the cable family and its sheath. In wet or exposed environments, use protected routing and properly insulated terminations.

Yes. This SKU is managed by the meter in Odoo: order the quantity corresponding to the required length, allowing for routing and service loops.