Invester 48/2000 Smart

The Victron Energy Inverter 48/2000 Smart provides a continuous output power of 1600W (equivalent to 2000VA). It is designed to deliver stable and reliable power to your equipment.

Yes, this inverter uses a full-bridge topology with a toroidal transformer, ensuring a pure sine wave output. This guarantees compatibility with all types of electronic and electrical devices, including the most sensitive ones.

ECO mode is a feature that minimizes the idle power consumption of the inverter. When the connected load drops below a predefined value (minimum 15W), the inverter switches to standby mode. It then periodically reactivates (default every 2.5 seconds, adjustable) to check if the load has increased, and remains on if necessary.

The inverter integrates multiple protection mechanisms to ensure system safety and durability:

Output short-circuit protection.Overload protection.High temperature protection (overload or high ambient temperature).Abnormal battery voltage protection (too high or too low).Excessive DC ripple protection.

The Victron Energy Inverter 48/2000 Smart has a maximum efficiency of up to 92%. This high efficiency ensures optimal energy conversion and reduces losses.

Yes, the inverter is designed with a high peak power capacity, which is essential for starting inductive loads. It can power devices such as power tools, LED lamp converters, or halogen lamps without difficulty.

The Victron Energy Inverter 48/2000 Smart can operate within an ambient temperature range of -40°C to +65°C. It is equipped with a fan-assisted cooling system. Please note that above 40°C, the power is derated by 1.25% per degree Celsius.

You can connect a wide range of devices requiring 230V AC power, thanks to the inverter's pure sine wave output. This includes sensitive electronic equipment, power tools, household appliances, and lighting systems.

Yes, the inverter is a "Smart" model with built-in Bluetooth, enabling wireless monitoring and configuration via the VictronConnect app on smartphone or tablet. It also features a VE.Direct port for wired connection to a computer via a VE.Direct to USB cable (sold separately).

Yes, for applications requiring automatic switching between different AC sources (e.g., shore power and inverter), Victron Energy recommends using an automatic transfer switch such as the Filax. The Filax provides a very short switching time (less than 20 milliseconds) to avoid interruptions.

The DC connection to the battery is made via screw terminals, requiring no special tools for installation. It is crucial to use battery cables with sufficient cross-section and to respect polarity to avoid damaging the inverter and blowing the internal fuse.

For optimal operation, the inverter must be mounted on a flat surface. It is important to:

Avoid any contact with water and do not expose it to rain or humidity.Do not place it in direct sunlight.Maintain an ambient temperature between -20°C and 40°C (humidity < 95% without condensation).Leave at least 10 centimeters of free space around the inverter for adequate ventilation.

Yes, this inverter is a Safety Class I product, which means the chassis must be grounded without fail. A grounding point is located on the outside of the product. The ground conductor must have at least half the cross-section of the conductors used for the battery connection.

Yes, the inverter is equipped with a two-pole connector for a remote on/off switch. You can connect an external switch or link the left contact of the connector to the battery positive, which is useful for automotive applications (e.g., via the ignition contact). The inverter's front switch must also be set to 'On' or 'ECO' for the inverter to start.