Lithium SuperPack 12,8V/100Ah (M8)

The Victron Energy Lithium SuperPack battery uses LiFePO4 technology, delivering a round-trip energy efficiency of 92%. In comparison, a typical lead-acid battery has an efficiency of 80%. Additionally, LiFePO4 batteries do not require full charging to maintain their lifespan, and their efficiency remains high even with shallow discharges, unlike lead-acid batteries whose efficiency drops significantly after 80% charge.

The Victron Energy Lithium SuperPack 12.8V/100Ah battery is designed for long life. It delivers 2500 cycles at 80 % depth of discharge (DoD) and at a temperature of 25 °C.

The nominal capacity of this battery is 100 Ah at a temperature of 25 °C. It retains a respectable capacity of 80 Ah even at 0 °C.

At a temperature of 25 °C, this battery provides a nominal energy output of 1280 Wh (Watt-hours).

The SuperPack battery's integrated BMS provides comprehensive protection against:

Overcharging.Deep discharges.Extreme temperatures (low or high).It automatically disconnects the battery if maximum limits are exceeded to ensure safety and longevity.

Yes, the battery can be used in cold weather. The operating temperature range for discharge is -20 °C to +50 °C. However, charging is automatically blocked when the cell temperature drops below 0 °C (±3 °C) and only resumes once the temperature exceeds 3 °C (±3 °C).

The Victron Energy Lithium SuperPack 12.8V/100Ah battery can handle a continuous maximum discharge current of 100 A. It can also manage a peak discharge current of 150 A for up to 10 seconds.

The maximum continuous charging current recommended for this battery is 100 A.

The end-of-discharge voltage of this battery is 10 V. The integrated BMS will disconnect the battery if the voltage drops below this threshold to protect it from deep discharge.

For optimal charging, recommended voltages are:

Absorption voltage: 14.2 V – 14.4 V. It is preferable that the absorption period does not exceed 4 hours to avoid slightly reducing battery lifespan.Float voltage: 13.5 V.

No, one of the major advantages of Lithium-Ion batteries like this SuperPack is that they do not need to be fully charged. Their lifespan can even be slightly improved with partial charging rather than a full charge, making them much more flexible compared to lead-acid batteries.

No, the Victron Energy Lithium SuperPack battery is designed for simplified installation. It includes a Battery Management System (BMS) and a safety switch, eliminating the need for additional external components.

This battery’s power connections use M8 threaded inserts. You will need to use suitable cable lugs to securely connect your cables.

The battery can be mounted vertically or on its longer sides. However, it must not be placed on its longer side with the positive terminal (+) at the bottom.

The battery dimensions are 215 mm (height) x 306 mm (width) x 169 mm (depth). Its weight is 10.5 kg.

The Victron Energy Lithium SuperPack 12.8V/100Ah battery has an IP43 protection rating. This means it is protected against solid objects larger than 1 mm and against water splashes.

Yes, parallel connection is unlimited with Victron SuperPack batteries. You can connect multiple units in parallel to increase the total capacity of your energy system.

No, these batteries cannot be connected in series. This model is specifically designed for 12V systems and must not be used to create higher-voltage configurations.

Yes, this battery is designed for marine and onboard applications. However, as a 12V model and not allowing series connection, it is limited to systems requiring a nominal voltage of 12V.

Yes, the battery may temporarily disconnect when a load with high input capacitance, such as an inverter, is connected. However, the battery will attempt to reconnect automatically after approximately 10 seconds.