Phoenix Smart 12/500VA 230V Schuko pöördeplokk

The Phoenix Smart 12/500VA 230V Schuko inverter delivers a continuous power output of 500 VA, equivalent to 400 W at an ambient temperature of 25°C. At 40°C, the continuous power output is 350 W. It can also handle a peak power of up to 900 W for starting demanding loads.

This converter is designed for a 12 V DC input voltage with an operating range of 9.2 V to 17 V. The output voltage is 230 V AC, adjustable between 210 V and 245 V.

ECO mode is an energy-saving feature that puts the inverter/charger into standby when the connected load drops below a preset value (default: 15 W). In standby mode, the inverter/charger briefly turns on every 2.5 seconds (adjustable interval) to check if the load has increased. If the load exceeds the preconfigured level, the inverter/charger stays on to power the devices.

Yes, the inverter is equipped with a VE.Direct communication port. This port enables detailed monitoring and configuration via:

A computer, using a VE.Direct-to-USB interface cable (not included).Apple and Android smartphones, tablets, MacBooks, or other devices, using a VE.Direct Bluetooth Smart electronic key (not included).You can then adjust parameters such as low battery alarm and cut-off thresholds, output voltage and frequency, as well as ECO mode settings.

The Phoenix Smart 12/500VA converter includes multiple protections to ensure the safety and durability of the device and your installation:

Short-circuit protection on the output.Overload protection.High battery voltage protection.Low battery voltage protection.Excessive temperature protection.Excessive DC ripple protection.

This specific Phoenix Smart 12/500VA inverter model is equipped with a Schuko (CEE 7/4) AC output socket, commonly used in continental Europe.

The Phoenix Smart 12/500VA converter delivers a maximum efficiency of up to 90 %. This high efficiency ensures optimized energy conversion, minimizing losses and maximizing battery autonomy.

For optimal performance and long service life, installation must meet the following conditions:

Surface: Mount the inverter on a flat surface.Environment: Avoid any contact with water and do not expose it to direct sunlight.Temperature: Ambient temperature must be between -20 °C and 40 °C (humidity below 95% without condensation).Ventilation: Leave at least 10 centimeters of space around the inverter to ensure adequate airflow.Recommended mounting options include base mounting, vertical wall mounting (fan at the bottom), and horizontal wall mounting.

Connection to the battery is made via screw terminals, requiring no specific tools for installation. It is crucial to respect polarity when connecting. Reversed battery wire connections can damage the converter and blow the internal fuse.

For the Phoenix Smart 12/500VA inverter, the minimum recommended battery capacity is 60 Ah to ensure stable operation and fully utilize the product's capacity.

Yes, the converter is equipped with a two-pole connector for a remote on/off switch. You can connect an external switch or link the left contact of the connector to the battery's positive terminal, which is useful for automotive applications (e.g., via the ignition contact).

Yes, the inverter's output frequency is fully configurable. You can set it to 50 Hz or 60 Hz depending on your specific needs and your equipment's requirements.

Yes, the AC output voltage is configurable. You can adjust it within a range of 210 V to 245 V to match the requirements of your equipment or local standards.

The Phoenix Smart 12/500VA inverter is equipped with internal fuses (3 x 35 A ATOF type 32 V). However, these fuses are not user-replaceable. In case of a fuse issue, the device must be returned for qualified service.

The inverter has the following dimensions:

Height: 86 mmWidth: 172 mmDepth: 275 mmIts weight is approximately 3.9 kg.

Yes, the Victron Energy Phoenix Smart 12/500VA inverter is a pure sine wave inverter. This technology provides high-quality power output, identical to that of the public grid, making it compatible with all electronic devices, including sensitive equipment such as computers, televisions, or power tools.

To automatically transfer the load to another AC source (such as the grid or a generator), Victron Energy recommends using the Filax automatic transfer switch. The Filax provides a very fast switching time (less than 20 milliseconds), allowing computers and other electronic equipment to operate without interruption.

Yes, this product is Safety Class I, which means the chassis must be grounded for safety reasons. A grounding point is provided outside the product. The ground conductor connecting the chassis to ground must have a cross-section of at least half that of the conductors used for the battery connection.