SmartSolar MPPT 100/30 laadimiskontroller

Ultra-fast MPPT (Maximum Power Point Tracking) technology allows the SmartSolar MPPT 100/30 charge controller to optimize solar energy harvesting. It is particularly effective when light intensity changes continuously, such as under cloudy skies or in case of partial shading.

Up to 30 % improvement in energy harvesting compared to PWM charge controllers.Up to 10 % improvement compared to slower MPPT controllers.Advanced detection of the maximum power point, even in the presence of multiple power points due to partial shading.

The SmartSolar MPPT 100/30 charge controller delivers a maximum conversion efficiency exceeding 98%. This high efficiency ensures optimal use of the solar energy captured by your panels.

No, the SmartSolar MPPT 100/30 charge controller does not require a cooling fan. Its design allows for efficient heat dissipation, enabling it to deliver maximum output current up to an ambient temperature of 40 °C without a fan.

The SmartSolar MPPT 100/30 controller includes comprehensive electronic protections to ensure system safety and durability. These include:

Over-temperature protection with power reduction at high temperatures.Protection against PV short circuits.Protection against PV polarity reversal.Protection against PV reverse current.Protection against output short circuits.

The SmartSolar MPPT 100/30 controller is designed to operate within a temperature range from -30 °C to +60 °C. It can deliver its full rated power up to an ambient temperature of 40 °C.

The maximum nominal charge current that the SmartSolar MPPT 100/30 controller can supply to the battery is 30 amperes (30 A).

The quiescent current draw of the SmartSolar MPPT 100/30 charge controller is 30 mA for a 12 V battery system and 20 mA for a 24 V battery system.

The Victron Energy SmartSolar MPPT 100/30 controller features advanced maximum power point tracking (MPPT) that efficiently manages partial shading conditions. In cases of partial shading, multiple maximum power points may appear on the power-voltage curve. Victron Energy's innovative algorithm ensures the controller always locks onto the optimal maximum power point, maximizing energy harvest.

Yes, the SmartSolar MPPT 100/30 controller includes an internal temperature sensor. This sensor adjusts the absorption and float charge voltage based on battery temperature, optimizing the charging process.

The dimensions of the SmartSolar MPPT 100/30 controller are 130 mm (height) x 186 mm (width) x 70 mm (depth). Its weight is 1.3 kg.

The SmartSolar MPPT 100/30 controller is compatible with 12 V and 24 V battery systems. It features automatic voltage selection.

The SmartSolar MPPT 100/30 controller is compatible with a wide range of battery types, including:

AGM batteriesGel batteriesFlooded lead-acid batteriesLithium batteries (LiFePO4)It also features a recovery function for fully discharged Li-ion batteries with integrated disconnect function.

The SmartSolar MPPT 100/30 controller can handle a nominal solar panel power up to:

440 W for a 12 V battery system. 880 W for a 24 V battery system. If a higher PV power is connected, the controller will limit the input power to these values.

The SmartSolar MPPT 100/30 controller can accept a maximum open-circuit voltage from solar panels of 100 V.

The SmartSolar MPPT 100/30 controller is designed to handle a maximum solar panel short-circuit current of 35 A. It is critical not to exceed this value, as a higher PV short-circuit current could damage the controller.

Yes, you can use an external sensor for battery voltage and temperature. The SmartSolar MPPT 100/30 controller can communicate with a Smart Battery Sense or an intelligent battery monitor BMV-712 via Bluetooth (VE.Smart Networking) to retrieve this data, enabling more precise charging.

The SmartSolar MPPT 100/30 controller offers several connectivity options:

Built-in Bluetooth Smart: Enables wireless configuration, monitoring, and updates via the VictronConnect app on smartphone or tablet.VE.Direct port: For wired connection to a Color Control GX, other GX products, a PC, or other devices, providing extended monitoring via the Victron Remote Management (VRM) portal if a GX device is used.

The SmartSolar MPPT 100/30 controller has an IP43 protection rating for electronic components and IP22 for the connection area. This means it is protected against solid objects larger than 1 mm and water projections for the electronic components, and against solid objects larger than 12.5 mm and dripping water for the connection area.

The SmartSolar MPPT 100/30 controller's power terminals are designed to accept cables with a maximum cross-section of 16 mm² (equivalent to AWG6).

Yes, the SmartSolar MPPT 100/30 controller has a fully discharged battery recovery function. It can initiate charging even if the battery has been discharged to zero volts. It can also reconnect to a fully discharged Li-ion battery with an integrated disconnection function.