Senzor XSONIC P319

The AIRMAR XSONIC P319 sensor is a compact through-hull transducer designed to be installed through your boat's hull. It is specifically developed to provide accurate data on water depth and temperature, essential for navigation and fishing.

The XSONIC P319 transducer is designed to accurately measure water depth beneath the boat and provide water temperature data. This information is critical for safe navigation and fishing efficiency.

The XSONIC P319 sensor is made of plastic with an acoustic window in urethane. This material choice makes it a lightweight, economical option that is durable and compliant with ABYC H-27 standards.

The XSONIC P319 sensor has a transmit power of 600 Watts. This power ensures effective detection of the seabed, even at significant depths.

The XSONIC P319 sensor is a dual-frequency transducer, meaning it operates at two distinct frequencies: 50 kHz and 200 kHz. This provides versatility for different fishing and navigation applications.

When the XSONIC P319 transducer operates at 50 kHz, it can achieve a maximum detection range of 366 meters (1200 feet). This frequency is ideal for deeper water detection and provides a wide beam.

At the 200 kHz frequency, the XSONIC P319 transducer provides a maximum detection range of 213 meters (700 feet). This frequency is optimal for precise detail of seabeds and targets in shallower waters.

The beam angles of the XSONIC P319 transducer vary by frequency:

At 50 kHz, it provides a wide 45° beam. At 200 kHz, its beam is narrower at 12°. These angles allow coverage tailored to different depths and detection needs.

The XSONIC P319 sensor is designed with a low profile. It protrudes only 5 mm (3/16") from the hull, minimizing drag and impact on your boat's performance.

Yes, the XSONIC P319 sensor is compliant with ABYC H-27 standards for durability. This compliance ensures the transducer meets stringent quality and safety standards for marine equipment.

The XSONIC P319 sensor differs from the Airmar B117 (bronze) or SS60 (stainless steel) models primarily in its material and cost. The P319 is made of plastic, making it a more economical and lightweight option, though it delivers similar performance in terms of power and frequencies for the intended applications.

Yes, in addition to depth, the XSONIC P319 sensor is equipped to measure and transmit water temperature data. This feature is useful for fishing, as water temperature influences fish behavior.

The XSONIC P319 sensor is ideally suited for planing powerboats and sailboats up to 8 meters (26 feet) in length. Its low-profile design benefits these types of vessels.

The XSONIC P319 sensor is designed to be compatible with Navico Group electronic equipment, which includes brands such as Lowrance, Simrad, and B&G. It typically uses a 9-pin xSonic connector for easy integration with these systems.

Yes, the XSONIC P319 sensor is specifically marketed by the Navico Group under the xSonic brand, indicating full compatibility with systems from brands such as Lowrance and Simrad. It is designed to integrate seamlessly with their fishfinders and multifunction displays.

Installing the XSONIC P319 sensor requires drilling a single hole in the hull with a diameter of 51 mm (2 inches). Ensure the hole is clean and correctly sized for secure and watertight installation.

Installing the XSONIC P319 sensor is considered simplified, requiring only a single hole in the hull. It comes with a rubber washer for sealing. However, a good understanding of marine sealing techniques and appropriate tools is recommended to ensure a correct and leak-free installation.

To achieve optimal performance, the XSONIC P319 sensor must be installed in an area of the hull where water flow is smooth and free of turbulence. It is recommended to position it away from keels, propellers, water intakes, or any other elements that could create air bubbles or interference, ideally on the starboard side of the boat if the propeller rotates clockwise.

The XSONIC P319 is a compact through-hull transducer designed to provide water depth and temperature data. Here are its main specifications:

Material: Plastic with urethane acoustic window.Frequencies: Dual-frequency 50 kHz and 200 kHz.Performance at 50 kHz: Wide beam of 45° with a maximum range of 366 meters (1200 feet).Performance at 200 kHz: 12° beam for precise detail up to 213 meters (700 feet).Power: 600 Watts.Design: Low profile, protrudes only 5 mm (3/16") from the hull to minimize drag.Use: Ideal for planing powerboats and sailboats up to 8 meters (26 feet).

Installing the XSONIC P319 transducer is simplified as it is a through-hull model. To install it, you will need to drill a single 51 mm (2 inch) hole in your boat’s hull. The transducer comes with a rubber washer to ease the mounting process and ensure proper watertightness. Its low-profile design means it will protrude only minimally from the hull once installed.