Kabel Nemesis B&G za međusprežanje

This cable, part number 000-15740-001, is specifically designed to connect a B&G Nemesis navigation display to the Nemesis hub. It provides both power supply to the display and Ethernet data transmission through a single connection.

The length of this interconnect cable is 0.6 metres (approximately 2 feet). This length is optimized for short, direct connections between the display and the hub to minimize clutter.

No, this cable is exclusively compatible with B&G Nemesis series displays and hubs. It will not work with other B&G product ranges or other brands.

Yes, each Nemesis display you connect to the hub requires its own interconnect cable 000-15740-001 to function properly.

No, it is not possible to replace it with a standard cable. The Nemesis cable is a specific model that combines in a single connector both the electrical power supply and the Ethernet network connection, which a standard cable cannot do.

The cable connects on one end to the Nemesis display and on the other end to one of the available ports on the Nemesis hub. Installation is simplified thanks to this single-cable design.

No, the Nemesis hub and displays are sold separately. This product only includes the 0.6m interconnect cable.

The Nemesis hub is designed to manage up to three Nemesis displays simultaneously, each requiring its own interconnect cable.

Yes, this is an authentic B&G interconnect cable, part number 000-15740-001. Using original parts is recommended to ensure optimal performance and compatibility with your Nemesis system.

The main advantage is simplified installation. By combining power and data in a single cable, it reduces the number of cables to run, minimizes clutter, and makes installation cleaner and faster.

No, this cable is a proprietary product designed for the B&G Nemesis ecosystem. It is not compatible with devices from other manufacturers.

This cable carries two types of signals simultaneously:

The electrical power required for the Nemesis display to operate.The Ethernet network data for communication with the hub and other instruments on the network.

This product, under part number 000-15740-001, corresponds specifically to the 0.6 meter version. This length is ideal for setups where the display and hub are close to each other.

It is not recommended to modify or extend this specific cable, as this could affect signal and power integrity. It is designed for a direct 0.6m connection.

Yes, like all B&G products, this cable and its connectors are made with high-quality materials to withstand the demanding conditions of the marine environment (humidity, salt, UV).

This cable is specifically used to establish the physical connection between a B&G Nemesis display and the B&G Nemesis hub.

Connecting the cable itself is straightforward (plug-and-play). However, the complete installation of the Nemesis system (mounting the display, the hub, and connecting to the boat's network) may require marine electronics skills.

We do not have information about the manufacturing country of this product.

The HS code (customs code) for this product is 8544429090.

Yes, this product is sold as a single Nemesis interconnection cable, 0.6m long.