Produžni kabel NMEA 2000 dužine 0,6 m

This 0.6 m NMEA2000 extension cable is designed to connect instruments, sensors, GPS antennas, or multifunction displays to the backbone of your NMEA2000 network. It extends connectivity and integrates new devices into the existing system.

This NMEA 2000 extension cable has a length of 0.6 meters (60 centimeters).

This cable uses standard micro-C connectors, compliant with the NMEA2000 standard. These connectors have five pins and are designed for secure and watertight connections in a marine environment.

Yes, this cable is specifically designed for marine environments. NMEA 2000 connectors are robust and watertight when correctly installed, which is essential to withstand humid and saline conditions.

This cable is a "drop cable". It is used to connect an individual device to a T-connector on the backbone of the NMEA 2000 network.

A 0.6 meter length is ideal for short connections, especially when the device to be connected is very close to the network backbone. This avoids clutter and unnecessary cable loops, contributing to a clean and organized installation.

This cable is manufactured by Navico, a group well-known in marine electronics, including brands such as Simrad, Lowrance, and B&G.

The reference number (SKU) of this cable is 000-0119-88.

Yes, this cable uses standard NMEA 2000 micro-C connectors and is compatible with all NMEA 2000-certified equipment, regardless of brand, as long as they use this type of connector.

Yes, the NMEA2000 standard is universal. As long as the device from another brand is NMEA2000-certified and uses standard micro-C connectors, this cable will be compatible.

No, this cable is specifically designed for the NMEA2000 protocol. NMEA0183 is a different protocol that uses separate cables and connectors. This cable is not compatible with an NMEA0183 network.

Raymarine SeaTalkNG networks use the NMEA2000 protocol but with proprietary connectors. This cable, equipped with standard micro-C NMEA2000 connectors, is not directly compatible with SeaTalkNG connectors without a specific adapter (not included with this product).

Yes, this is precisely one of the primary uses of this cable. It allows you to easily add a new instrument or sensor to your existing NMEA 2000 network by connecting it to a T-connector on the backbone.

Yes, the NMEA2000 standard allows for the transmission of both electrical power and data. This cable will carry both power and data to compatible devices connected to the NMEA2000 network.

To install this cable, you must screw it firmly to a T-connector on your NMEA 2000 backbone at one end, then to the device you wish to connect at the other end. Ensure connections are hand-tight to guarantee waterproofing.

No, NMEA 2000 connectors are designed to be tightened by hand. No specific tool is generally required to make a secure and watertight connection.

This cable must be connected between a T-connector on your NMEA 2000 backbone and the device (instrument, sensor, display) you want to power and connect to the network.

No, it is not recommended to cut or modify the length of this cable. NMEA 2000 cables are manufactured with factory-sealed, specific terminations to ensure signal reliability, integrity, and waterproofing. Cutting the cable would compromise these features.

No, NMEA 2000 drop cables have no specific wiring direction. Both ends are identical and can be connected either to the T-connector or to the device.

The NMEA2000 standard recommends a maximum length of 6 meters for drop cables to maintain signal integrity. This 0.6 m cable is well below this limit, ensuring optimal performance.