Mini sabirna sabirnica zajedničke mase 100 A - 6 priključka

A common busbar (common ground bus) is a centralized connection point for all ground (negative) wires of the various electrical devices on a boat or vehicle. It organizes and simplifies wiring by grouping ground connections in one location, making troubleshooting easier and improving the reliability of the electrical system.

This mini busbar is designed to handle a maximum cumulative current of 100 amperes (A). It is critical not to exceed this value to ensure the safety and proper operation of your electrical installation.

This busbar is equipped with 6 terminals, allowing you to connect up to six different ground circuits to a common point.

ISO 8846 certification, issued by the International Marine Certification Institute (IMCI), ensures this busbar is protected against ignition of surrounding flammable gases. This feature is critical for marine electrical installations, as it reduces the risk of fire or explosion on board, in compliance with the Recreational Craft Directive 94/25/EC.

Yes, absolutely. This product is certified ISO 8846 by IMCI and meets the requirements of the Recreational Craft Directive 94/25/EC (as amended by 2003/44/EC), attesting to its compliance and safety for nautical applications.

Improved organization of the ground wiring. Increased reliability of the electrical system. Easier troubleshooting and maintenance thanks to centralized connections. Enhanced safety due to marine-grade certification against gas ignition. A compact and space-saving solution, ideal for confined spaces.

Yes, the Blue Sea Systems range offers busbars with different capacities and numbers of terminals. For example, to meet higher power distribution needs, there are models such as the BusBar 20 Gang (references 2307, 2312) or the MiniBus 5 x 8-32 (reference 2314), which provide more connection points or capacities suited to more complex systems.

Yes, this mini busbar is particularly well suited to small to medium-sized electrical systems. Its compact design and 100 A capacity make it an ideal solution for consolidating grounds for a limited number of devices in spaces where size is a key factor.

No, this mini busbar model is not supplied with protective caps or covers. It is designed to be installed as-is in a suitable environment.

The main function of a ground busbar is to collect and distribute the return currents (negatives) from all electrical devices back to the battery or the main ground point of the system. In contrast, a positive busbar distributes the positive current from the battery to the various devices. Both are essential for an organized and safe electrical installation.

Yes, as a product certified for marine use, this busbar is designed to withstand harsh conditions, including corrosion. Blue Sea Systems products intended for this use are manufactured with materials and finishes suited to ensure long service life and reliable performance in wet and saline environments.

This busbar is typically installed using screws. It features mounting holes for this purpose. It is recommended to secure it on a flat and stable surface, in a dry location that is easily accessible for maintenance and wiring.

For reliable and secure connections, use ring terminals (or ring crimp terminals) of the appropriate size for the terminal screws. Ensure the terminals are properly crimped onto the cables to guarantee good conductivity and prevent loose connections.

Yes, it is imperative to disconnect all power sources, including the main battery, before installing or making any modifications to the electrical system. This prevents the risks of short circuits, electric shock, or damage to equipment.

The terminals on this busbar are fitted with #8-32 threaded studs. Therefore, you must use ring terminals with a hole size matching this screw size to ensure a secure and optimal connection. Wire gauge must be selected based on the connected circuit's amperage, without exceeding the busbar's total capacity of 100 A.

The busbar must be installed in a dry location, protected from water splashes and easily accessible for connections and maintenance. Ideally, it should be located near the equipment it powers or the main ground point to minimize cable length and optimize organization.

Yes, ground busbars like this one are generally passive and not limited by system voltage (12V, 24V, or even 48V DC), provided the cumulative current capacity of 100 A is not exceeded. They serve as a common connection point for ground return, regardless of the operating voltage of connected devices.

Yes, this busbar is a standard wiring component. It is designed to accept ground connections from any electronic or electrical device, regardless of brand, as long as individual and cumulative current requirements are met and physical connections (terminals) are appropriate.

Although specifically certified and optimized for the marine environment, this busbar can be used in other applications requiring a common and organized power distribution, such as recreational vehicles (motorhomes), off-grid solar systems, or other DC electrical installations where a robust and reliable solution is required.

No, this busbar is specifically designed for DC (direct current) electrical systems, such as those found in boats, vehicles, and battery-based setups. It is not suitable for power distribution in AC (alternating current) systems.