Nosač osigurača AGC/MDL za ugradnju na ploču

A panel-mount AGC/MDL fuse holder is an electrical component designed to integrate AGC (Automotive Glass Cartridge) or MDL (Medium Delay) fuses directly onto a dashboard or control panel. It protects an electrical circuit from overload or short-circuit while providing easy access for fuse replacement.

The Blue Sea Systems 5021-BSS fuse block is designed for protecting marine electrical circuits. It provides rapid circuit interruption in case of overload or short circuit, safeguarding connected equipment. Its panel mounting allows for a clean and secure installation with easy access for maintenance.

This fuse holder is compatible with AGC (Automotive Glass Cartridge) and MDL (Medium Delay) glass fuses. These fuse types are commonly used in marine and automotive applications.

Yes, this fuse holder is specifically designed for protecting electrical circuits in marine applications. Blue Sea Systems is a brand known for reliable products in nautical environments.

No, the Blue Sea Systems 5021-BSS fuse holder is sold separately. Compatible fuses (AGC or MDL type) must be purchased separately, based on the amperage required for your specific application.

To install this fuse holder on a panel, you will need to drill a hole with a diameter of 1/2 inch (approximately 12.7 mm).

Yes, the design of this fuse holder allows easy access for inspection and fuse replacement. The front part unscrews to insert or remove the fuse without difficulty.

The main function is to securely integrate a fuse within an electrical system, typically on a dashboard or control panel. This protects a specific circuit while allowing easy monitoring and replacement of the fuse if needed.

No, fuse replacement is generally done without a specific tool, simply by unscrewing the fuse holder cap. Initial installation on the panel will require basic tools such as a drill for the mounting hole and tools for electrical connections (e.g., crimping pliers for terminals).

Blue Sea Systems is a brand known for the quality and reliability of its marine electrical products. Choosing this fuse holder ensures effective and durable protection of your circuits, with a robust design suited to the demands of marine environments.

No, a fuse holder is not resettable. When a fuse blows due to overload or short circuit, it must be replaced with a new fuse of the same type and amperage. A circuit breaker, on the other hand, can be manually reset after tripping.

Yes, the front part of the fuse holder, which includes the cap allowing access to the fuse, remains visible on the panel once installation is complete. The main body of the fuse holder is recessed behind the panel.

Blue Sea Systems products generally come with a limited manufacturer warranty covering material and manufacturing defects. To check the specific terms and conditions of the warranty applicable to this fuse block, refer to the official Blue Sea Systems documentation or contact their customer service.