Osigurač AMG® - 100 A

The AMG® fuse is an electrical protection component designed for high-current circuits in marine applications. Its primary role is to secure onboard electrical systems by protecting expensive equipment and wiring from overcurrents, short circuits, and overloads.

This Blue Sea AMG® fuse has a rated current of 100 amperes (100 A). This means it is designed to protect circuits where the current must not exceed this value.

This 100 A fuse is recommended for protecting high-current circuits in marine applications such as inverters, bow thrusters, windlasses, battery charging systems, or other equipment requiring robust protection against overcurrent.

The AMG® fuse offers several advantages:

It is designed for high-current circuits, providing reliable protection. It can serve as a compact alternative to ANL fuses in certain installations. It has a high interrupt rating, essential for the safety of marine equipment. It is a standard and interchangeable component, making maintenance easier.

Yes, this 100 A AMG® fuse is specifically designed to protect marine electrical systems against short circuits and overloads by interrupting the circuit when the current exceeds its rated value in a hazardous manner.

An AMG® fuse is a single-use protection device. Once it has blown to protect the circuit from an overcurrent or short circuit, it must be replaced with a new fuse of the same rating. It cannot be reset.

This AMG® fuse from Blue Sea Systems has a high interrupting rating, typically 2000 amperes (2000 A) at 32V DC. This rating indicates the maximum current it can safely interrupt without damage to itself or the system.

This AMG® 100 A fuse is specifically designed for use with BLUE SEA AMG® fuse holders. This compatibility ensures a secure connection and optimal performance of the protection system.

Although AMG® fuse dimensions may be standardized, it is strongly recommended to use this fuse with AMG® fuse holders from Blue Sea Systems. This ensures perfect compatibility, secure connection, and the protection performance intended by the manufacturer.

Yes, the AMG® fuse can serve as a more compact alternative to ANL fuses in certain installations, particularly where space is limited, while providing high breaking capacity and reliable protection for high-current circuits.

This Blue Sea Systems AMG® fuse is designed to operate in systems with a maximum voltage of 32V DC. It is suitable for common marine electrical systems of 12V and 24V.

Yes, this fuse is fully compatible with 12V and 24V marine electrical systems, as its maximum supported voltage is 32V DC. It provides effective protection for these configurations.

Yes, this fuse is part of the Blue Sea Systems electrical protection range and is designed to integrate seamlessly with other products from the brand, including dedicated AMG® fuse holders, busbars, and distribution panels.

Installing this AMG® fuse requires the following steps:

Ensure the circuit is powered off for safety reasons.Insert the fuse into a suitable AMG® fuse holder.Connect the fuse holder to the circuit wiring, ensuring the wiring is properly sized for 100 A.Tighten all connections to ensure a safe and reliable electrical contact.Restore power to the circuit and verify proper operation.

For a 100 A fuse, it is critical to use appropriately sized wiring to prevent overheating. The recommended cable diameter depends on the cable length and system voltage (12V or 24V). It is imperative to consult marine cable sizing charts (ABYC or ISO standards) to select the appropriate cross-section that can safely handle 100 A.

Installing or replacing this AMG® fuse typically does not require specific tooling beyond basic electrical connection tools, such as socket wrenches or screwdrivers to secure cables to the AMG® fuse holder.

No, this product is only the 100 A AMG® fuse. The compatible AMG® fuse holder is sold separately and is required for installation and proper operation of this fuse.