Osigurač ANL - 130 A

An ANL (Ampere-Normal-Link) fuse is a type of fuse designed for high-current electrical circuits. It is specifically used to protect equipment and wiring from overloads and short circuits, ensuring the safety and longevity of your electrical system, particularly in marine applications.

This Blue Sea ANL fuse has a nominal rating of 130 amperes (A). This means it is designed to protect circuits where the current does not regularly exceed this value and will blow if the current exceeds this threshold excessively or for an extended period.

This fuse is ideal for protecting high-current circuits in marine applications. It is commonly used on:

Main battery lines.Inverter power circuits.Bow thrusters.Other marine equipment requiring protection for significant currents.

The main difference lies in their application and current rating:

ANL fuses (such as this 130 A model) are designed for high-current circuits, providing robust and reliable protection for critical applications. ATC/ATO fuses are typically used for low-current circuits, such as lighting, instrumentation, or other small electronic equipment on board.

Yes, this ANL Blue Sea fuse is specifically designed for marine applications. It is built to withstand the demanding conditions of this environment, such as vibrations, humidity, and temperature variations, ensuring reliable protection for your onboard electrical systems.

This ANL fuse requires a specific ANL fuse holder. ANL fuse holders are designed to accommodate the shape and terminals of this type of fuse, ensuring secure electrical contact and proper installation.

Yes, absolutely. This fuse is compatible with 12 V DC and 24 V DC electrical systems, as its maximum supported voltage is 32 V DC and 80 V DC, which exceeds typical marine applications.

No, this Blue Sea ANL fuse is specifically designed and certified for direct current (DC) systems only. It must not be used in alternating current (AC) applications, as its interrupt and protection characteristics are not suitable for this type of current.

Yes, you can generally replace an ANL fuse from another brand with this Blue Sea fuse, provided both fuses are of the same type (ANL) and have the same rated current (130 A). Ensure the new fuse’s voltage and interrupting rating are equal to or higher than the original for adequate protection.

To install this ANL fuse, you must place it in a suitable ANL fuse holder. The fuse holder must be wired in series on the circuit you wish to protect, typically as close as possible to the power source (e.g., the battery). Ensure all connections are clean and tightly secured to prevent voltage drops and overheating.

To install or replace this fuse, you will typically need an appropriate wrench or socket to tighten the terminal nuts of the ANL fuse holder. It is also recommended to have a screwdriver to secure the fuse holder if needed, as well as cable cutting and stripping tools if you are installing a new circuit.

The ANL fuse holder must be installed in a dry location, protected from water splashes and impacts. It is crucial to mount it as close as possible to the power source (for example, the battery's positive terminal) to minimize the length of unprotected cable and maximize protection efficiency.

A blown ANL fuse can usually be identified visually. The metal filament inside the fuse body will be broken or visibly melted. Some ANL fuse holders may also include an LED indicator that lights up when the fuse is blown, but this is not a feature of the fuse itself.

Yes, it is mandatory to disconnect all power sources (for example, turn off the main circuit breaker or disconnect the battery) before attempting to inspect or replace a fuse. This is essential for your personal safety and to avoid further damage to the electrical system or causing a short circuit.

The fuse amperage must be selected based on the lowest-rated cable in the circuit it protects, not the equipment itself. The fuse should be sized to protect the cable from overheating in case of overload. It is recommended to consult cable sizing charts and ABYC (American Boat and Yacht Council) standards or equivalent to determine the appropriate amperage.