Osigurač serije 187 - površinska ugradnja 70 A

This is a robust electrical protection component, specifically designed for marine applications. Its function is to interrupt the circuit in case of overload or short circuit, protecting the equipment and wiring on board your boat.

Its primary function is to protect marine electrical circuits from potential damage caused by excessive currents. It automatically cuts off power in the event of an overload or short circuit, thereby preventing the risk of fire or equipment failure.

This circuit breaker has a rated capacity of 70 amperes (70 A). This means it is designed to handle a continuous current up to 70 A and will trip if the current exceeds this threshold for a given period, in accordance with its trip curve.

Yes, the BLUE SEA 187 series circuit breaker is a manually resettable circuit breaker. After tripping due to overload or short circuit, it can be manually reset once the cause of the issue has been identified and corrected, providing a convenient alternative to replaceable fuses.

The main difference is that a circuit breaker can be manually reset after tripping, whereas a fuse must be replaced once it has blown. The circuit breaker thus provides more flexible power management and a more robust long-term solution.

Yes, it is specifically designed for marine applications. Its robustness and design are suited to the demanding conditions encountered aboard boats, including temperature variations, humidity, and vibrations.

It primarily protects against two types of electrical faults:

Overloads: when too much current flows through a circuit beyond its rated capacity.
Short circuits: low-resistance paths allowing excessive current to flow, often caused by insulation failure.

The reference number (SKU) of this circuit breaker is 7141-BSS. The supplier reference is also 7141B-BSS.

Yes, Blue Sea Systems’ 187-series circuit breakers are designed to be ignition-protected in compliance with SAE J1171. This feature makes them safe for installation in engine compartments of boats powered by gasoline engines, where flammable vapors may be present.

This circuit breaker is specifically designed for surface mounting. This means it is fixed directly onto a flat surface, such as an electrical panel, bulkhead, or panel, with the connections accessible from the rear or sides.

Due to its surface-mount design and ruggedness, it can be integrated into various marine environments. Typical locations include electrical panels, engine compartments (thanks to its ignition protection) or other areas where space optimization is critical.

Although specific instructions are not detailed here, it is always strongly recommended to consult the complete documentation provided by the manufacturer Blue Sea Systems or to call on a qualified professional for correct and safe installation in accordance with maritime standards.

Wiring must be done while strictly respecting polarities (input/output) and using a cable cross-section suitable for 70 A to ensure effective protection and prevent overheating. It is critical to follow the manufacturer's electrical diagrams and current marine safety standards.

Yes, Blue Sea Systems 187 series circuit breakers are generally compatible with 12V, 24V, and often up to 48V direct current (DC) electrical systems. This versatility makes them suitable for most marine electrical installations.

A 70 A circuit breaker is suitable for protecting medium to high-power circuits. This can include equipment such as medium-sized inverters, windlasses, bow thrusters, winches, or other high-load devices requiring robust and reliable protection.

Although designed and optimized for marine applications, this type of circuit breaker may technically be usable in other environments requiring similar electrical protection, provided that voltage, current, and environmental specifications (e.g., protection against moisture and ignition) are met.

Yes, thanks to its surface-mount design, it can be easily integrated into existing distribution panels or added to an electrical system to protect a new circuit. Ensure there is sufficient space for physical mounting and proper wiring.