Utikač 12 V s jednostavnim produžnim priključkom

The [BLUE SEA] 12 Volt Plug with Single Extension Socket is designed to provide a reliable 12V DC power solution in marine and wet environments. It securely and durably extends your auxiliary electrical network aboard by combining a male plug and a female socket.

Yes, this product is specifically designed for marine and humid environments. It is built with corrosion-resistant components and features moisture protection to ensure reliable performance at sea.

This socket is designed to operate with 12 Volt DC power systems.

The male plug is protected by an integrated 10-amp fuse, limiting the maximum current the system can deliver to 10A. Although the socket can support up to 15A, the fuse protection remains at 10A for the entire system.

Yes, the male plug is fitted with a 10-amp fuse that provides overload protection for your equipment and installation.

The male plug includes an 'ON' LED indicator that lights up when the socket is live, allowing easy verification of the power state.

The product is shipped with a robust cable 1.8 metres long.

The wire used is 18 AWG gauge, ensuring efficient conductivity for currents up to 10A.

The conductive components are made of nickel-plated copper alloy, providing excellent conductivity and increased resistance to corrosion, essential in marine environments.

A bayonet locking system is integrated to securely hold the male plug in the socket, preventing unintentional disconnections caused by vibrations or movement.

Yes, the socket is fitted with a watertight cap that protects the contacts from moisture and debris when not connected to the male plug.

Yes, the unit is designed to withstand constant vibrations, a common factor in marine environments, thanks to robust components and wide contact surfaces for stable electrical connections.

The product combines a male plug and a female socket. The male plug is usually ready to use with its wiring. The female socket requires wiring and installation on a surface.

Ensure the electrical power is disconnected before installation. Wiring must comply with marine electrical standards, respecting polarity and using secure connections. The stern gland is designed to be mounted in a way that protects the rear connections from moisture.

The socket is designed with internal strain relief features for the wiring. The wires must be stripped and connected to the appropriate terminals on the socket, respecting polarity (positive and negative), and connections must be tight to prevent loosening due to vibrations.

No, this socket is specifically designed for 12 Volt DC systems. Using it with 24 Volts could damage the socket, the fuse, or connected devices.

No, it is not recommended to use this socket for devices requiring more than 10 amperes, as the integrated 10-ampere fuse will trip to protect the circuit. This could also overload the wiring and components, even if the socket is rated at 15A.

The male plug is a standard 12V cigarette lighter type, making it compatible with most standard 12V cigarette lighter sockets or accessory sockets. The included female socket is also compatible with this type of plug.

The male connector is equipped with a moisture-sealing ring around the shaft. This gasket prevents water infiltration and ensures a firm and reliable electrical contact, even in damp conditions.

Yes, both the male plug and female socket integrate internal strain relief devices. This helps protect the wire connections from mechanical stress and prevents disconnections or damage caused by cable tension.