Mrežni kabel BlueNet 6m za brodove

This Garmin BlueNet marine network cable (ref. 010-12528-31) is 6 meters long. It is designed to connect compatible devices in the Garmin range to each other, such as chartplotters, fishfinders, or network modules, with a length suitable for installations aboard mid-sized sailboats and powerboats.

This cable is designed for Garmin devices equipped with a BlueNet port, including the latest GPSMAP chartplotter series. To verify compatibility, we recommend checking the technical datasheet of your Garmin device or contacting our customer service. The BlueNet standard is Garmin's proprietary network protocol that replaces the classic Ethernet connector.

No, this cable is specifically designed for Garmin's BlueNet network, which is a proprietary protocol different from NMEA 2000. BlueNet allows simultaneous transmission of navigation data and electrical power over a single cable, but it is not compatible with the NMEA 2000 standard. For a NMEA 2000 connection, you must use cables and connectors compliant with this standard.

Installing this BlueNet cable is straightforward: simply plug each end of the cable into the BlueNet ports of your compatible Garmin devices. The cable is 6 meters long, providing some flexibility for routing on board. Avoid excessive bending and secure it neatly to prevent any risk of tearing. No special tools are required for installation.

Garmin's BlueNet network offers several advantages over a classic marine Ethernet network: it allows simultaneous transmission of navigation data and electrical power over a single cable, simplifying onboard wiring. Additionally, it provides more integrated connectivity and is required for Garmin's next-generation devices compatible with this standard. This reduces the number of cables needed and simplifies installation.

The Garmin BlueNet 6 m marine network cable (P/N 010-12528-31) is a standard connection cable with BlueNet male connectors at each end. It is supplied without additional adapters. If you require adapters for specific setups, we recommend consulting Garmin’s range of BlueNet-compatible accessories.

This cable is designed for the BlueNet standard, Garmin’s proprietary network protocol introduced to replace the classic Ethernet connector used on earlier generations. It is therefore primarily compatible with newer Garmin devices featuring a BlueNet port. For older devices using a standard Ethernet port, you will need to use a marine-grade Ethernet cable (such as Garmin part number 010-12744-00) or an adapter if available.

Yes, if your Garmin fishfinder and chartplotter both have BlueNet ports, this 6-metre cable can be used to connect them. The BlueNet network allows navigation data and power to be transmitted over a single cable, which is ideal for linking different compatible Garmin devices.

Yes, Garmin's BlueNet standard allows simultaneous transmission of navigation data and power over a single cable. This simplifies onboard wiring by reducing the number of cables needed to connect compatible devices.

To check if your Garmin device is compatible with the BlueNet network, verify the presence of a port labeled "BlueNet" on the device. You can also consult the user manual of your device or the technical datasheet on Garmin's website. The most recent GPSMAP chartplotters are generally compatible with this standard.

Garmin's BlueNet network allows multiple compatible devices to be connected together, but the exact configuration depends on your devices. This 6-meter cable can be used to connect two devices directly. For series or star connections, you may need additional cables and possibly a Garmin BlueNet-compatible hub or network module.

The Garmin BlueNet 6 m marine network cable is a simple accessory to install. It is usually supplied without detailed instructions, as its use is intuitive: simply plug the connectors into the BlueNet ports of your devices. If you need installation advice, you can consult your Garmin device manual or contact our customer service.

No, this cable is designed to connect compatible Garmin devices to each other via the BlueNet network. It is not intended to be connected to a computer, as BlueNet ports are not present on standard computers. To connect a Garmin device to a computer, you will need a USB cable or a specific adapter depending on your device.

To ensure the longevity of this BlueNet marine network cable, it is advisable to clean it regularly with fresh water to remove salt residue, especially after use at sea. Avoid excessive bending and store it in a dry place when not in use. Periodically check the condition of the connectors to ensure they are clean and in good working order.